altos: Use stdbool true/false instead of TRUE/FALSE
[fw/altos] / src / drivers / ao_trng_send.c
index 85034efd767f7337ebbabbff75a428fccd6b8e73..e8df4cea8e69f25861a73a81acfedcc5f372dfad 100644 (file)
@@ -31,6 +31,29 @@ static AO_TICK_TYPE  trng_power_time;
 
 static uint8_t         random_mutex;
 
+static void
+ao_trng_start(void)
+{
+       if (!trng_running) {
+               ao_mutex_get(&random_mutex);
+               if (!trng_running) {
+                       AO_TICK_TYPE    delay;
+
+                       delay = trng_power_time + TRNG_ENABLE_DELAY - ao_time();
+                       if (delay > TRNG_ENABLE_DELAY)
+                               delay = TRNG_ENABLE_DELAY;
+
+                       /* Delay long enough for the HV power supply
+                        * to stabilize so that the first bits we read
+                        * aren't of poor quality
+                        */
+                       ao_delay(delay);
+                       trng_running = true;
+               }
+               ao_mutex_put(&random_mutex);
+       }
+}
+
 #if AO_USB_HAS_IN2
 
 static struct ao_task  ao_trng_send_raw_task;
@@ -54,34 +77,13 @@ ao_trng_get_raw(uint16_t *buf)
 static void
 ao_trng_send_raw(void)
 {
-       static uint16_t *buffer[2];
+       uint16_t        *buffer[2];
        int             usb_buf_id;
 
-       if (!buffer[0]) {
-               buffer[0] = ao_usb_alloc();
-               buffer[1] = ao_usb_alloc();
-               if (!buffer[0])
-                       ao_exit();
-       }
-
-       usb_buf_id = 0;
+       usb_buf_id = ao_usb_alloc2(buffer);
 
        for (;;) {
-               ao_mutex_get(&random_mutex);
-               if (!trng_running) {
-                       AO_TICK_TYPE    delay;
-
-                       delay = trng_power_time + TRNG_ENABLE_DELAY - ao_time();
-                       if (delay > TRNG_ENABLE_DELAY)
-                               delay = TRNG_ENABLE_DELAY;
-
-                       /* Delay long enough for the HV power supply
-                        * to stabilize so that the first bits we read
-                        * aren't of poor quality
-                        */
-                       ao_delay(delay);
-                       trng_running = TRUE;
-               }
+               ao_trng_start();
 #ifdef AO_LED_TRNG_RAW
                ao_led_on(AO_LED_TRNG_RAW);
 #endif
@@ -89,9 +91,7 @@ ao_trng_send_raw(void)
 #ifdef AO_LED_TRNG_RAW
                ao_led_off(AO_LED_TRNG_RAW);
 #endif
-               ao_mutex_put(&random_mutex);
-               ao_usb_write2(buffer[usb_buf_id], AO_USB_IN_SIZE);
-               usb_buf_id = 1-usb_buf_id;
+               usb_buf_id = ao_usb_write2(AO_USB_IN_SIZE);
        }
 }
 
@@ -104,8 +104,8 @@ ao_trng_get_cooked(uint16_t *buf)
 {
        uint16_t        i;
        uint16_t        t;
-       uint32_t        *rnd = (uint32_t *) ao_adc_ring;
-       uint8_t         mismatch = 0;
+       uint32_t        *rnd = (uint32_t *) (void *) ao_adc_ring;
+       uint8_t         mismatch = 1;
 
        t = ao_adc_get(AO_USB_IN_SIZE) >> 1;            /* one 16-bit value per output byte */
        for (i = 0; i < AO_USB_IN_SIZE / sizeof (uint16_t); i++) {
@@ -131,20 +131,13 @@ ao_trng_get_cooked(uint16_t *buf)
 static void
 ao_trng_send(void)
 {
-       static uint16_t *buffer[2];
-       int     usb_buf_id;
-       int     good_bits;
-       int     failed;
-       int     s;
-
-       if (!buffer[0]) {
-               buffer[0] = ao_usb_alloc();
-               buffer[1] = ao_usb_alloc();
-               if (!buffer[0])
-                       ao_exit();
-       }
+       uint16_t        *buffer[2];
+       int             usb_buf_id;
+       int             good_bits;
+       int             failed;
+       int             s;
 
-       usb_buf_id = 0;
+       usb_buf_id = ao_usb_alloc(buffer);
 
 #ifdef AO_TRNG_ENABLE_PORT
        ao_gpio_set(AO_TRNG_ENABLE_PORT, AO_TRNG_ENABLE_BIT, AO_TRNG_ENABLE_PIN, 1);
@@ -153,10 +146,20 @@ ao_trng_send(void)
 
        ao_crc_reset();
 
-       ao_delay(TRNG_ENABLE_DELAY);
-
        for (s = 0; s < AO_TRNG_START_WAIT; s++) {
-               if (ao_trng_get_cooked(buffer[0]))
+               int i;
+               uint16_t        min, max;
+               uint16_t        buf[AO_USB_IN_SIZE>>1];
+
+               ao_trng_get_raw(buf);
+               min = max = buf[0];
+               for (i = 1; i < (AO_USB_IN_SIZE>>1); i++) {
+                       uint16_t v = buf[i];
+                       if (v < min) min = v;
+                       if (v > max) max = v;
+               }
+               /* Wait for at least 10 bits of range */
+               if ((uint16_t) (max - min) >= 1024)
                        break;
                ao_delay(AO_MS_TO_TICKS(10));
        }
@@ -181,21 +184,7 @@ ao_trng_send(void)
 #endif
 
        for (;;) {
-               ao_mutex_get(&random_mutex);
-               if (!trng_running) {
-                       AO_TICK_TYPE    delay;
-
-                       delay = trng_power_time + TRNG_ENABLE_DELAY - ao_time();
-                       if (delay > TRNG_ENABLE_DELAY)
-                               delay = TRNG_ENABLE_DELAY;
-
-                       /* Delay long enough for the HV power supply
-                        * to stabilize so that the first bits we read
-                        * aren't of poor quality
-                        */
-                       ao_delay(delay);
-                       trng_running = TRUE;
-               }
+               ao_trng_start();
 #ifdef AO_LED_TRNG_COOKED
                ao_led_on(AO_LED_TRNG_COOKED);
 #endif
@@ -203,14 +192,11 @@ ao_trng_send(void)
 #ifdef AO_LED_TRNG_COOKED
                ao_led_off(AO_LED_TRNG_COOKED);
 #endif
-               ao_mutex_put(&random_mutex);
                if (good_bits) {
-                       ao_usb_write(buffer[usb_buf_id], AO_USB_IN_SIZE);
-                       usb_buf_id = 1-usb_buf_id;
+                       usb_buf_id = ao_usb_write(AO_USB_IN_SIZE);
                        failed = 0;
                } else {
                        failed++;
-                       ao_delay(AO_MS_TO_TICKS(10));
                        if (failed > 10) {
                                ao_usb_disable();
                                ao_panic(AO_PANIC_DMA);
@@ -227,7 +213,7 @@ static void ao_trng_suspend(void *arg)
 #ifdef AO_TRNG_ENABLE_PORT
        ao_gpio_set(AO_TRNG_ENABLE_PORT, AO_TRNG_ENABLE_BIT, AO_TRNG_ENABLE_PIN, 0);
 #endif
-       trng_running = FALSE;
+       trng_running = false;
 }
 
 static void ao_trng_resume(void *arg)