--- /dev/null
+/*
+ * Copyright © 2023 Keith Packard <keithp@keithp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#ifndef _AO_ST7565_H_
+#define _AO_ST7565_H_
+
+#include <ao_draw.h>
+
+/*
+ * Wiring the NewHaven NHD-C12864LZ-FSW-FBW-3V3 display
+ *
+ * PIN Symbol Connection
+ * 1 /CS1 Chip select. Active low.
+ * 2 /RES Reset. Active low.
+ * 3 A0 Register select. 0: instruction, 1: data
+ * 4 /WR NC
+ * 5 /RD NC
+ * 6 DB0 NC
+ * 7 DB1 NC
+ * 8 DB2 NC
+ * 8 DB3 NC
+ * 10 DB4 NC
+ * 11 DB5 NC
+ * 12 DB6 SPI clock. Mode 3 (idle high, rising edge)
+ * 13 DB7 SPI data.
+ * 14 Vdd +3.3V
+ * 15 Vss Ground
+ * 16 Vout 1uF to ground
+ * 17 CAP3+ 1uF to CAP1-
+ * 18 CAP1- 1uF to CAP3+ and CAP1+
+ * 19 CAP1+ 1uF to CAP1-
+ * 20 CAP2+ 1uF to CAP2-
+ * 21 CAP2- 1uF to CAP2+
+ * 22 V4 1uF to ground
+ * 23 V3 1uF to ground
+ * 24 V2 1uF to ground
+ * 25 V1 1uF to ground
+ * 26 V0 1uF to ground
+ * 27 C86 MPU select. Ground
+ * 28 PS Parallel/serial select. Ground
+ */
+
+#define ST7565_DISPLAY_OFF 0xae
+#define ST7565_DISPLAY_ON 0xaf
+#define ST7565_DISPLAY_START_LINE_SET(line) (0x40 | (line))
+#define ST7565_PAGE_ADDRESS_SET(page) (0xb0 | (page))
+#define ST7565_COLUMN_ADDRESS_SET_MSN(nib) (0x10 | (nib))
+#define ST7565_COLUMN_ADDRESS_SET_LSN(nib) (0x00 | (nib))
+#define ST7565_ADC_SELECT_NORMAL 0xa0
+#define ST7565_ADC_SELECT_REVERSE 0xa1
+#define ST7565_DISPLAY_NORMAL 0xa6
+#define ST7565_DISPLAY_REVERSE 0xa7
+#define ST7565_DISPLAY_ALL_POINTS_OFF 0xa4
+#define ST7565_DISPLAY_ALL_POINTS_ON 0xa5
+#define ST7565_LCD_BIAS_1_9 0xa2
+#define ST7565_LCD_BIAS_1_7 0xa3
+#define ST7565_RMW 0xe0
+#define ST7565_RMW_END 0xee
+#define ST7565_RESET 0xe2
+#define ST7565_COMMON_MODE_NORMAL 0xc0
+#define ST7565_COMMON_MODE_REVERSE 0xc8
+#define ST7565_POWER_CONTROL_SET(pc) (0x28 | (pc))
+#define ST7565_RESISTOR_RATIO_SET(rr) (0x20 | (rr))
+#define ST7565_ELECTRONIC_VOLUME_SET 0x81
+#define ST7565_SLEEP_MODE 0xac
+#define ST7565_BOOSTER_RATIO_SET 0xf8
+#define ST7565_NOP 0xe3
+
+/* Max 50ns SPI clock time */
+#define AO_ST7565_SPI_SPEED ao_spi_speed(AO_ST7565_SPI_BUS, 20000000)
+
+void
+ao_st7565_update(struct ao_bitmap *bitmap);
+
+void
+ao_st7565_set_brightness(uint8_t val);
+
+uint8_t
+ao_st7565_get_brightness(void);
+
+void
+ao_st7565_init(void);
+
+#endif /* _AO_ST7565_H_ */