altos: Add temporary RF power settings

[fw/altos] / src / drivers / ao_cc1120.c

diff --git a/src/drivers/ao_cc1120.c b/src/drivers/ao_cc1120.c
index 35be54a46ffffa89e7e1b385d01d0b486c8e9a44..53bb5a62f5621bedb4c94d48d76b660b5213ea46 100644 (file)
--- a/src/drivers/ao_cc1120.c
+++ b/src/drivers/ao_cc1120.c
@@ -38,7 +38,7 @@ extern const uint32_t ao_radio_cal;
 
 #define FOSC   32000000
 
-#define ao_radio_select()      ao_spi_get_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS,AO_SPI_SPEED_1MHz)
+#define ao_radio_select()      ao_spi_get_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS,AO_SPI_SPEED_4MHz)
 #define ao_radio_deselect()    ao_spi_put_mask(AO_CC1120_SPI_CS_PORT,(1 << AO_CC1120_SPI_CS_PIN),AO_CC1120_SPI_BUS)
 #define ao_radio_spi_send(d,l) ao_spi_send((d), (l), AO_CC1120_SPI_BUS)
 #define ao_radio_spi_send_fixed(d,l) ao_spi_send_fixed((d), (l), AO_CC1120_SPI_BUS)
@@ -834,8 +834,8 @@ ao_radio_rx_isr(void)
 {
        uint8_t d;
 
-       d = stm_spi2.dr;
-       stm_spi2.dr = 0;
+       d = AO_CC1120_SPI.dr;
+       AO_CC1120_SPI.dr = 0;
        if (rx_ignore == 0) {
                if (rx_data_cur >= rx_data_count)
                        ao_exti_disable(AO_CC1120_INT_PORT, AO_CC1120_INT_PIN);
@@ -924,10 +924,10 @@ ao_radio_recv(__xdata void *d, uint8_t size)
        ao_radio_wake = 0;
        ao_radio_mcu_wake = 0;
 
-       stm_spi2.cr2 = 0;
+       AO_CC1120_SPI.cr2 = 0;
 
        /* clear any RXNE */
-       (void) stm_spi2.dr;
+       (void) AO_CC1120_SPI.dr;
 
        /* Have the radio signal when the preamble quality goes high */
        ao_radio_reg_write(AO_CC1120_INT_GPIO_IOCFG, CC1120_IOCFG_GPIO_CFG_PQT_REACHED);