altos/telefireone-v1.0: Track ao_led_init API change

[fw/altos] / src / drivers / ao_25lc1024.c

diff --git a/src/drivers/ao_25lc1024.c b/src/drivers/ao_25lc1024.c
index c5d811f7bfc73905219c1b9cd5b6fb0ddb683aaf..c73f54df8edaa15c7febe6e1eab4a1df4b244d42 100644 (file)
--- a/src/drivers/ao_25lc1024.c
+++ b/src/drivers/ao_25lc1024.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -23,16 +24,16 @@
 #define EE_DEVICE_SIZE ((uint32_t) 128 * (uint32_t) 1024)
 
 /* Total bytes of available storage */
-__pdata uint32_t       ao_storage_total;
+uint32_t       ao_storage_total;
 
 /* Block size - device is erased in these units. At least 256 bytes */
-__pdata uint32_t       ao_storage_block;
+uint32_t       ao_storage_block;
 
 /* Byte offset of config block. Will be ao_storage_block bytes long */
-__pdata uint32_t       ao_storage_config;
+uint32_t       ao_storage_config;
 
 /* Storage unit size - device reads and writes must be within blocks of this size. Usually 256 bytes. */
-__pdata uint16_t       ao_storage_unit;
+uint16_t       ao_storage_unit;
 
 /*
  * Using SPI on USART 0, with P1_2 as the chip select
@@ -42,7 +43,7 @@ __pdata uint16_t      ao_storage_unit;
 #define EE_CS          P1_2
 #define EE_CS_PIN      2
 
-static __xdata uint8_t ao_ee_mutex;
+static uint8_t ao_ee_mutex;
 
 #define ao_ee_delay() do { \
        _asm nop _endasm; \
@@ -57,7 +58,7 @@ static __xdata uint8_t ao_ee_mutex;
 struct ao_ee_instruction {
        uint8_t instruction;
        uint8_t address[3];
-} __xdata ao_ee_instruction;
+} ao_ee_instruction;
 
 static void
 ao_ee_write_enable(void)
@@ -91,9 +92,9 @@ ao_ee_wrsr(uint8_t status)
 
 #define EE_BLOCK_NONE  0xffff
 
-static __xdata uint8_t ao_ee_data[EE_BLOCK_SIZE];
-static __pdata uint16_t ao_ee_block = EE_BLOCK_NONE;
-static __pdata uint8_t ao_ee_block_dirty;
+static uint8_t ao_ee_data[EE_BLOCK_SIZE];
+static uint16_t ao_ee_block = EE_BLOCK_NONE;
+static uint8_t ao_ee_block_dirty;
 
 /* Write the current block to the EEPROM */
 static void
@@ -156,7 +157,7 @@ ao_ee_fill(uint16_t block)
 }
 
 uint8_t
-ao_storage_device_write(uint32_t pos, __xdata void *buf, uint16_t len) __reentrant
+ao_storage_device_write(uint32_t pos, void *buf, uint16_t len) 
 {
        uint16_t block = (uint16_t) (pos >> EE_BLOCK_SHIFT);
 
@@ -175,7 +176,7 @@ ao_storage_device_write(uint32_t pos, __xdata void *buf, uint16_t len) __reentra
 }
 
 uint8_t
-ao_storage_device_read(uint32_t pos, __xdata void *buf, uint16_t len) __reentrant
+ao_storage_device_read(uint32_t pos, void *buf, uint16_t len) 
 {
        uint16_t block = (uint16_t) (pos >> EE_BLOCK_SHIFT);
 
@@ -188,7 +189,7 @@ ao_storage_device_read(uint32_t pos, __xdata void *buf, uint16_t len) __reentran
 }
 
 void
-ao_storage_flush(void) __reentrant
+ao_storage_flush(void) 
 {
        ao_mutex_get(&ao_ee_mutex); {
                ao_ee_flush_internal();
@@ -196,7 +197,7 @@ ao_storage_flush(void) __reentrant
 }
 
 uint8_t
-ao_storage_erase(uint32_t pos) __reentrant
+ao_storage_erase(uint32_t pos) 
 {
        ao_mutex_get(&ao_ee_mutex); {
                ao_ee_flush_internal();
@@ -208,7 +209,7 @@ ao_storage_erase(uint32_t pos) __reentrant
 }
 
 static void
-ee_store(void) __reentrant
+ee_store(void) 
 {
 }
 
@@ -224,7 +225,7 @@ ao_storage_setup(void)
 }
 
 void
-ao_storage_device_info(void) __reentrant
+ao_storage_device_info(void) 
 {
 }
 
@@ -236,5 +237,5 @@ void
 ao_storage_device_init(void)
 {
        /* set up CS */
-       ao_enable_output(EE_CS_PORT, EE_CS_PIN,1);
+       ao_enable_output(EE_CS_PORT, EE_CS_PIN, EE_CS, 1);
 }