__sfr __at 0xA8 IEN0; /* Interrupt Enable 0 Register */
-sbit __at 0xA8 RFTXRXIE; /* RF TX/RX done interrupt enable */
-sbit __at 0xA9 ADCIE; /* ADC interrupt enable */
-sbit __at 0xAA URX0IE; /* USART0 RX interrupt enable */
-sbit __at 0xAB URX1IE; /* USART1 RX interrupt enable (shared with I2S RX) */
-sbit __at 0xAB I2SRXIE; /* I2S RX interrupt enable (shared with USART1 RX) */
-sbit __at 0xAC ENCIE; /* AES encryption/decryption interrupt enable */
-sbit __at 0xAD STIE; /* Sleep Timer interrupt enable */
-sbit __at 0xAF EA; /* Enable All */
+__sbit __at 0xA8 RFTXRXIE; /* RF TX/RX done interrupt enable */
+__sbit __at 0xA9 ADCIE; /* ADC interrupt enable */
+__sbit __at 0xAA URX0IE; /* USART0 RX interrupt enable */
+__sbit __at 0xAB URX1IE; /* USART1 RX interrupt enable (shared with I2S RX) */
+__sbit __at 0xAB I2SRXIE; /* I2S RX interrupt enable (shared with USART1 RX) */
+__sbit __at 0xAC ENCIE; /* AES encryption/decryption interrupt enable */
+__sbit __at 0xAD STIE; /* Sleep Timer interrupt enable */
+__sbit __at 0xAF EA; /* Enable All */
#define IEN0_EA (1 << 7)
#define IEN0_STIE (1 << 5)
*/
__sfr __at 0x88 TCON; /* CPU Interrupt Flag 1 */
-sbit __at 0x8F URX1IF; /* USART1 RX interrupt flag. Automatically cleared */
-sbit __at 0x8F I2SRXIF; /* I2S RX interrupt flag. Automatically cleared */
-sbit __at 0x8D ADCIF; /* ADC interrupt flag. Automatically cleared */
-sbit __at 0x8B URX0IF; /* USART0 RX interrupt flag. Automatically cleared */
-sbit __at 0x89 RFTXRXIF; /* RF TX/RX complete interrupt flag. Automatically cleared */
+__sbit __at 0x8F URX1IF; /* USART1 RX interrupt flag. Automatically cleared */
+__sbit __at 0x8F I2SRXIF; /* I2S RX interrupt flag. Automatically cleared */
+__sbit __at 0x8D ADCIF; /* ADC interrupt flag. Automatically cleared */
+__sbit __at 0x8B URX0IF; /* USART0 RX interrupt flag. Automatically cleared */
+__sbit __at 0x89 RFTXRXIF; /* RF TX/RX complete interrupt flag. Automatically cleared */
#define TCON_URX1IF (1 << 7)
#define TCON_I2SRXIF (1 << 7)
*/
__sfr __at 0x98 S0CON; /* CPU Interrupt Flag 2 */
-sbit __at 0x98 ENCIF_0; /* AES interrupt 0. */
-sbit __at 0x99 ENCIF_1; /* AES interrupt 1. */
+__sbit __at 0x98 ENCIF_0; /* AES interrupt 0. */
+__sbit __at 0x99 ENCIF_1; /* AES interrupt 1. */
#define S0CON_ENCIF_1 (1 << 1)
#define S0CON_ENCIF_0 (1 << 0)
*/
__sfr __at 0xC0 IRCON; /* CPU Interrupt Flag 4 */
-sbit __at 0xC0 DMAIF; /* DMA complete interrupt flag */
-sbit __at 0xC1 T1IF; /* Timer 1 interrupt flag. Automatically cleared */
-sbit __at 0xC2 T2IF; /* Timer 2 interrupt flag. Automatically cleared */
-sbit __at 0xC3 T3IF; /* Timer 3 interrupt flag. Automatically cleared */
-sbit __at 0xC4 T4IF; /* Timer 4 interrupt flag. Automatically cleared */
-sbit __at 0xC5 P0IF; /* Port0 interrupt flag */
-sbit __at 0xC7 STIF; /* Sleep Timer interrupt flag */
+__sbit __at 0xC0 DMAIF; /* DMA complete interrupt flag */
+__sbit __at 0xC1 T1IF; /* Timer 1 interrupt flag. Automatically cleared */
+__sbit __at 0xC2 T2IF; /* Timer 2 interrupt flag. Automatically cleared */
+__sbit __at 0xC3 T3IF; /* Timer 3 interrupt flag. Automatically cleared */
+__sbit __at 0xC4 T4IF; /* Timer 4 interrupt flag. Automatically cleared */
+__sbit __at 0xC5 P0IF; /* Port0 interrupt flag */
+__sbit __at 0xC7 STIF; /* Sleep Timer interrupt flag */
#define IRCON_DMAIF (1 << 0) /* DMA complete interrupt flag */
#define IRCON_T1IF (1 << 1) /* Timer 1 interrupt flag. Automatically cleared */
*/
__sfr __at 0xE8 IRCON2; /* CPU Interrupt Flag 5 */
-sbit __at 0xE8 USBIF; /* USB interrupt flag (shared with Port2) */
-sbit __at 0xE8 P2IF; /* Port2 interrupt flag (shared with USB) */
-sbit __at 0xE9 UTX0IF; /* USART0 TX interrupt flag */
-sbit __at 0xEA UTX1IF; /* USART1 TX interrupt flag (shared with I2S TX) */
-sbit __at 0xEA I2STXIF; /* I2S TX interrupt flag (shared with USART1 TX) */
-sbit __at 0xEB P1IF; /* Port1 interrupt flag */
-sbit __at 0xEC WDTIF; /* Watchdog timer interrupt flag */
+__sbit __at 0xE8 USBIF; /* USB interrupt flag (shared with Port2) */
+__sbit __at 0xE8 P2IF; /* Port2 interrupt flag (shared with USB) */
+__sbit __at 0xE9 UTX0IF; /* USART0 TX interrupt flag */
+__sbit __at 0xEA UTX1IF; /* USART1 TX interrupt flag (shared with I2S TX) */
+__sbit __at 0xEA I2STXIF; /* I2S TX interrupt flag (shared with USART1 TX) */
+__sbit __at 0xEB P1IF; /* Port1 interrupt flag */
+__sbit __at 0xEC WDTIF; /* Watchdog timer interrupt flag */
#define IRCON2_USBIF (1 << 0) /* USB interrupt flag (shared with Port2) */
#define IRCON2_P2IF (1 << 0) /* Port2 interrupt flag (shared with USB) */
__xdata __at (0xde20) volatile uint8_t USBFIFO[12];
/* ADC Data register, low and high */
-__sfr at 0xBA ADCL;
-__sfr at 0xBB ADCH;
+__sfr __at 0xBA ADCL;
+__sfr __at 0xBB ADCH;
__xdata __at (0xDFBA) volatile uint16_t ADCXDATA;
/* ADC Control Register 1 */
-__sfr at 0xB4 ADCCON1;
+__sfr __at 0xB4 ADCCON1;
# define ADCCON1_EOC (1 << 7) /* conversion complete */
# define ADCCON1_ST (1 << 6) /* start conversion */
# define ADCCON1_RCTRL_CLOCK_LFSR (1 << 2) /* Clock the LFSR once */
/* ADC Control Register 2 */
-__sfr at 0xB5 ADCCON2;
+__sfr __at 0xB5 ADCCON2;
# define ADCCON2_SREF_MASK (3 << 6) /* reference voltage */
# define ADCCON2_SREF_1_25V (0 << 6) /* internal 1.25V */
/* ADC Control Register 3 */
-__sfr at 0xB6 ADCCON3;
+__sfr __at 0xB6 ADCCON3;
# define ADCCON3_EREF_MASK (3 << 6) /* extra conversion reference */
# define ADCCON3_EREF_1_25 (0 << 6) /* internal 1.25V */
* ADC configuration register, this selects which
* GPIO pins are to be used as ADC inputs
*/
-__sfr at 0xF2 ADCCFG;
+__sfr __at 0xF2 ADCCFG;
/*
* Watchdog timer
*/
-__sfr at 0xc9 WDCTL;
+__sfr __at 0xc9 WDCTL;
#define WDCTL_CLEAR_FIRST (0xa << 4)
#define WDCTL_CLEAR_SECOND (0x5 << 4)
* Pin selectors, these set which pins are
* using their peripheral function
*/
-__sfr at 0xF3 P0SEL;
-__sfr at 0xF4 P1SEL;
-__sfr at 0xF5 P2SEL;
+__sfr __at 0xF3 P0SEL;
+__sfr __at 0xF4 P1SEL;
+__sfr __at 0xF5 P2SEL;
#define P2SEL_PRI3P1_USART0 (0 << 6)
#define P2SEL_PRI3P1_USART1 (1 << 6)
/*
* For pins used as GPIOs, these set which are used as outputs
*/
-__sfr at 0xFD P0DIR;
-__sfr at 0xFE P1DIR;
-__sfr at 0xFF P2DIR;
+__sfr __at 0xFD P0DIR;
+__sfr __at 0xFE P1DIR;
+__sfr __at 0xFF P2DIR;
#define P2DIR_PRIP0_USART0_USART1 (0 << 6)
#define P2DIR_PRIP0_USART1_USART0 (1 << 6)
#define P2DIR_PRIP0_TIMER1_2_USART0 (3 << 6)
#define P2DIR_PRIP0_MASK (3 << 6)
-__sfr at 0x8F P0INP;
+__sfr __at 0x8F P0INP;
/* Select between tri-state and pull up/down
* for pins P0_0 - P0_7.
#define P0INP_MDP0_0_PULL (0 << 0)
#define P0INP_MDP0_0_TRISTATE (1 << 0)
-__sfr at 0xF6 P1INP;
+__sfr __at 0xF6 P1INP;
/* Select between tri-state and pull up/down
* for pins P1_2 - P1_7. Pins P1_0 and P1_1 are
#define P1INP_MDP1_2_PULL (0 << 2)
#define P1INP_MDP1_2_TRISTATE (1 << 2)
-__sfr at 0xF7 P2INP;
+__sfr __at 0xF7 P2INP;
/* P2INP has three extra bits which are used to choose
* between pull-up and pull-down when they are not tri-stated
*/
#define P2INP_MDP2_0_TRISTATE (1 << 0)
/* GPIO interrupt status flags */
-__sfr at 0x89 P0IFG;
-__sfr at 0x8A P1IFG;
-__sfr at 0x8B P2IFG;
+__sfr __at 0x89 P0IFG;
+__sfr __at 0x8A P1IFG;
+__sfr __at 0x8B P2IFG;
#define P0IFG_USB_RESUME (1 << 7)
-__sfr at 0x8C PICTL;
+__sfr __at 0x8C PICTL;
#define PICTL_P2IEN (1 << 5)
#define PICTL_P0IENH (1 << 4)
#define PICTL_P0IENL (1 << 3)
#define PICTL_P0ICON (1 << 0)
/* GPIO pins */
-__sfr at 0x80 P0;
-
-sbit at 0x80 P0_0;
-sbit at 0x81 P0_1;
-sbit at 0x82 P0_2;
-sbit at 0x83 P0_3;
-sbit at 0x84 P0_4;
-sbit at 0x85 P0_5;
-sbit at 0x86 P0_6;
-sbit at 0x87 P0_7;
-
-__sfr at 0x90 P1;
-
-sbit at 0x90 P1_0;
-sbit at 0x91 P1_1;
-sbit at 0x92 P1_2;
-sbit at 0x93 P1_3;
-sbit at 0x94 P1_4;
-sbit at 0x95 P1_5;
-sbit at 0x96 P1_6;
-sbit at 0x97 P1_7;
-
-__sfr at 0xa0 P2;
-
-sbit at 0xa0 P2_0;
-sbit at 0xa1 P2_1;
-sbit at 0xa2 P2_2;
-sbit at 0xa3 P2_3;
-sbit at 0xa4 P2_4;
+__sfr __at 0x80 P0;
+
+__sbit __at 0x80 P0_0;
+__sbit __at 0x81 P0_1;
+__sbit __at 0x82 P0_2;
+__sbit __at 0x83 P0_3;
+__sbit __at 0x84 P0_4;
+__sbit __at 0x85 P0_5;
+__sbit __at 0x86 P0_6;
+__sbit __at 0x87 P0_7;
+
+__sfr __at 0x90 P1;
+
+__sbit __at 0x90 P1_0;
+__sbit __at 0x91 P1_1;
+__sbit __at 0x92 P1_2;
+__sbit __at 0x93 P1_3;
+__sbit __at 0x94 P1_4;
+__sbit __at 0x95 P1_5;
+__sbit __at 0x96 P1_6;
+__sbit __at 0x97 P1_7;
+
+__sfr __at 0xa0 P2;
+
+__sbit __at 0xa0 P2_0;
+__sbit __at 0xa1 P2_1;
+__sbit __at 0xa2 P2_2;
+__sbit __at 0xa3 P2_3;
+__sbit __at 0xa4 P2_4;
/* DMA controller */
struct cc_dma_channel {
# define DMA_CFG0_TRIGGER_ADC_CH7 28
# define DMA_CFG0_TRIGGER_I2STX 28
# define DMA_CFG0_TRIGGER_ENC_DW 29
-# define DMA_CFG0_TRIGGER_DNC_UP 30
+# define DMA_CFG0_TRIGGER_ENC_UP 30
# define DMA_CFG1_SRCINC_MASK (3 << 6)
# define DMA_CFG1_SRCINC_0 (0 << 6)
* DMAARM - DMA Channel Arm
*/
-__sfr at 0xD6 DMAARM;
+__sfr __at 0xD6 DMAARM;
# define DMAARM_ABORT (1 << 7)
# define DMAARM_DMAARM4 (1 << 4)
* DMAREQ - DMA Channel Start Request and Status
*/
-__sfr at 0xD7 DMAREQ;
+__sfr __at 0xD7 DMAREQ;
# define DMAREQ_DMAREQ4 (1 << 4)
# define DMAREQ_DMAREQ3 (1 << 3)
* DMA configuration 0 address
*/
-__sfr at 0xD5 DMA0CFGH;
-__sfr at 0xD4 DMA0CFGL;
+__sfr __at 0xD5 DMA0CFGH;
+__sfr __at 0xD4 DMA0CFGL;
/*
* DMA configuration 1-4 address
*/
-__sfr at 0xD3 DMA1CFGH;
-__sfr at 0xD2 DMA1CFGL;
+__sfr __at 0xD3 DMA1CFGH;
+__sfr __at 0xD2 DMA1CFGL;
/*
* DMAIRQ - DMA Interrupt Flag
*/
-__sfr at 0xD1 DMAIRQ;
+__sfr __at 0xD1 DMAIRQ;
# define DMAIRQ_DMAIF4 (1 << 4)
# define DMAIRQ_DMAIF3 (1 << 3)
*/
/* USART config/status registers */
-__sfr at 0x86 U0CSR;
-__sfr at 0xF8 U1CSR;
+__sfr __at 0x86 U0CSR;
+__sfr __at 0xF8 U1CSR;
# define UxCSR_MODE_UART (1 << 7)
# define UxCSR_MODE_SPI (0 << 7)
# define UxCSR_ACTIVE (1 << 0)
/* UART configuration registers */
-__sfr at 0xc4 U0UCR;
-__sfr at 0xfb U1UCR;
+__sfr __at 0xc4 U0UCR;
+__sfr __at 0xfb U1UCR;
# define UxUCR_FLUSH (1 << 7)
# define UxUCR_FLOW_DISABLE (0 << 6)
# define UxUCR_START_HIGH (1 << 0)
/* USART General configuration registers (mostly SPI) */
-__sfr at 0xc5 U0GCR;
-__sfr at 0xfc U1GCR;
+__sfr __at 0xc5 U0GCR;
+__sfr __at 0xfc U1GCR;
# define UxGCR_CPOL_NEGATIVE (0 << 7)
# define UxGCR_CPOL_POSITIVE (1 << 7)
# define UxGCR_BAUD_E_SHIFT 0
/* USART data registers */
-__sfr at 0xc1 U0DBUF;
+__sfr __at 0xc1 U0DBUF;
__xdata __at (0xDFC1) volatile uint8_t U0DBUFXADDR;
-__sfr at 0xf9 U1DBUF;
+__sfr __at 0xf9 U1DBUF;
__xdata __at (0xDFF9) volatile uint8_t U1DBUFXADDR;
/* USART baud rate registers, M value */
-__sfr at 0xc2 U0BAUD;
-__sfr at 0xfa U1BAUD;
+__sfr __at 0xc2 U0BAUD;
+__sfr __at 0xfa U1BAUD;
/* Flash controller */
-__sfr at 0xAE FCTL;
+__sfr __at 0xAE FCTL;
#define FCTL_BUSY (1 << 7)
#define FCTL_SWBSY (1 << 6)
#define FCTL_CONTRD_ENABLE (1 << 4)
#define FCTL_ERASE (1 << 0)
/* Flash write data. Write two bytes here */
-__sfr at 0xAF FWDATA;
+__sfr __at 0xAF FWDATA;
__xdata __at (0xDFAF) volatile uint8_t FWDATAXADDR;
/* Flash write/erase address */
-__sfr at 0xAD FADDRH;
-__sfr at 0xAC FADDRL;
+__sfr __at 0xAD FADDRH;
+__sfr __at 0xAC FADDRL;
/* Flash timing */
-__sfr at 0xAB FWT;
+__sfr __at 0xAB FWT;
/* Radio */
-__sfr at 0xD9 RFD;
-__xdata at (0xDFD9) volatile uint8_t RFDXADDR;
+__sfr __at 0xD9 RFD;
+__xdata __at (0xDFD9) volatile uint8_t RFDXADDR;
-__sfr at 0xE9 RFIF;
+__sfr __at 0xE9 RFIF;
#define RFIF_IM_TXUNF (1 << 7)
#define RFIF_IM_RXOVF (1 << 6)
#define RFIF_IM_TIMEOUT (1 << 5)
#define RFIF_IM_CCA (1 << 1)
#define RFIF_IM_SFD (1 << 0)
-__sfr at 0x91 RFIM;
+__sfr __at 0x91 RFIM;
#define RFIM_IM_TXUNF (1 << 7)
#define RFIM_IM_RXOVF (1 << 6)
#define RFIM_IM_TIMEOUT (1 << 5)
#define RFIM_IM_CCA (1 << 1)
#define RFIM_IM_SFD (1 << 0)
-__sfr at 0xE1 RFST;
+__sfr __at 0xE1 RFST;
#define RFST_SFSTXON 0x00
#define RFST_SCAL 0x01
__xdata __at (0xdf3d) uint8_t RF_VCO_VC_DAC;
#define RF_VCO_VC_DAC_OFF 0x3d
+/* AES engine */
+
+__sfr __at 0xB1 ENCDI;
+__sfr __at 0xB2 ENCDO;
+__xdata __at (0xDFB1) volatile uint8_t ENCDIXADDR;
+__xdata __at (0xDFB2) volatile uint8_t ENCDOXADDR;
+
+__sfr __at 0xB3 ENCCCS;
+
+#define ENCCCS_MODE_CBC (0 << 4)
+#define ENCCCS_MODE_CFB (1 << 4)
+#define ENCCCS_MODE_OFB (2 << 4)
+#define ENCCCS_MODE_CTR (3 << 4)
+#define ENCCCS_MODE_ECB (4 << 4)
+#define ENCCCS_MODE_CBC_MAC (5 << 4)
+#define ENCCCS_RDY (1 << 3)
+#define ENCCCS_CMD_ENCRYPT (0 << 1)
+#define ENCCCS_CMD_DECRYPT (1 << 1)
+#define ENCCCS_CMD_LOAD_KEY (2 << 1)
+#define ENCCCS_CMD_LOAD_IV (3 << 1)
+#define ENCCCS_START (1 << 0)
+
#endif
projects / fw / altos / blobdiff