Merge branch 'master' of git://git.gag.com/fw/altos

[fw/altos] / src / cc1111 / ao_serial.c

diff --git a/src/cc1111/ao_serial.c b/src/cc1111/ao_serial.c
index d90103b0f09e6b64c585d62339990dc44651a4a4..4838380228214dcf7fe0e475bf493a89237bcc21 100644 (file)
--- a/src/cc1111/ao_serial.c
+++ b/src/cc1111/ao_serial.c
@@ -17,6 +17,25 @@
 
 #include "ao.h"
 
+const __code struct ao_serial_speed ao_serial_speeds[] = {
+       /* [AO_SERIAL_SPEED_4800] = */ {
+               /* .baud = */ 163,
+               /* .gcr  = */ (7 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
+       },
+       /* [AO_SERIAL_SPEED_9600] = */ {
+               /* .baud = */ 163,
+               /* .gcr  = */ (8 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
+       },
+       /* [AO_SERIAL_SPEED_19200] = */ {
+               /* .baud = */ 163,
+               /* .gcr  = */ (9 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
+       },
+       /* [AO_SERIAL_SPEED_57600] = */ {
+               /* .baud = */ 59,
+               /* .gcr =  */ (11 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
+       },
+};
+
 #if HAS_SERIAL_0
 
 volatile __xdata struct ao_fifo        ao_serial0_rx_fifo;
@@ -116,7 +135,7 @@ ao_serial1_rx_isr(void) __interrupt 3
        if (!ao_fifo_full(ao_serial1_rx_fifo))
                ao_fifo_insert(ao_serial1_rx_fifo, U1DBUF);
        ao_wakeup(&ao_serial1_rx_fifo);
-#if USE_SERIAL1_STDIN
+#if USE_SERIAL_1_STDIN
        ao_wakeup(&ao_stdin_ready);
 #endif
 }
@@ -181,25 +200,6 @@ ao_serial1_drain(void) __critical
                ao_sleep(&ao_serial1_tx_fifo);
 }
 
-const __code struct ao_serial_speed ao_serial_speeds[] = {
-       /* [AO_SERIAL_SPEED_4800] = */ {
-               /* .baud = */ 163,
-               /* .gcr  = */ (7 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
-       },
-       /* [AO_SERIAL_SPEED_9600] = */ {
-               /* .baud = */ 163,
-               /* .gcr  = */ (8 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
-       },
-       /* [AO_SERIAL_SPEED_19200] = */ {
-               /* .baud = */ 163,
-               /* .gcr  = */ (9 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
-       },
-       /* [AO_SERIAL_SPEED_57600] = */ {
-               /* .baud = */ 59,
-               /* .gcr =  */ (11 << UxGCR_BAUD_E_SHIFT) | UxGCR_ORDER_LSB
-       },
-};
-
 void
 ao_serial1_set_speed(uint8_t speed)
 {
@@ -292,7 +292,9 @@ ao_serial_init(void)
 
        /* Make the USART pins be controlled by the USART */
        P1SEL |= (1 << 6) | (1 << 7);
+#if HAS_SERIAL_1_HW_FLOW
        P1SEL |= (1 << 5) | (1 << 4);
+#endif
 #endif
 
        /* UART mode with receiver enabled */