altos/teletiny-v2.0: Support multiple SPI busses on CC1111

[fw/altos] / src / cc1111 / ao_arch_funcs.h

diff --git a/src/cc1111/ao_arch_funcs.h b/src/cc1111/ao_arch_funcs.h
index 9ad14fbbad0144e4b960c32be95a82244c293a67..ae1841089c0a59383b6919c7fcd424a5c9bfd7e6 100644 (file)
--- a/src/cc1111/ao_arch_funcs.h
+++ b/src/cc1111/ao_arch_funcs.h
@@ -19,40 +19,130 @@
  * ao_spi.c
  */
 
-extern __xdata uint8_t ao_spi_mutex;
+#if !HAS_SPI_0 && !HAS_SPI_1
+#define HAS_SPI_0      1
+#define SPI_0_ALT_2    1
+#endif
 
-#define ao_spi_get_mask(reg,mask) do {\
-       ao_mutex_get(&ao_spi_mutex); \
-       (reg) &= ~(mask); \
+#if HAS_SPI_0 && HAS_SPI_1
+#define MULTI_SPI      1
+#define N_SPI          2
+#else
+#define MULTI_SPI      0
+#define N_SPI          1
+#endif
+
+extern __xdata uint8_t ao_spi_mutex[N_SPI];
+
+#if MULTI_SPI
+#define ao_spi_get(bus)        ao_mutex_get(&ao_spi_mutex[bus])
+#define ao_spi_put(bus)        ao_mutex_put(&ao_spi_mutex[bus])
+#else
+#define ao_spi_get(bus)        ao_mutex_get(&ao_spi_mutex[0])
+#define ao_spi_put(bus)        ao_mutex_put(&ao_spi_mutex[0])
+#endif
+
+#define AO_SPI_SPEED_FAST      17
+#define AO_SPI_SPEED_200kHz    13
+
+#if MULTI_SPI
+#define ao_spi_set_speed(bus,speed) (*(bus ? &U1GCR : &U0GCR) =(UxGCR_CPOL_NEGATIVE | \
+                                                               UxGCR_CPHA_FIRST_EDGE | \
+                                                               UxGCR_ORDER_MSB | \
+                                                               ((speed) << UxGCR_BAUD_E_SHIFT)))
+#else
+#define ao_spi_set_speed(bus,speed) (U0GCR = (UxGCR_CPOL_NEGATIVE |    \
+                                             UxGCR_CPHA_FIRST_EDGE |   \
+                                             UxGCR_ORDER_MSB |         \
+                                             ((speed) << UxGCR_BAUD_E_SHIFT)))
+#endif
+
+#define ao_spi_get_slave(bus) do {                     \
+               ao_spi_get(bus);                        \
+               ao_spi_set_speed(bus,AO_SPI_SPEED_FAST);        \
+       } while (0)
+
+#define ao_spi_put_slave(bus) do {             \
+               ao_spi_put(bus);                \
        } while (0)
 
-#define ao_spi_put_mask(reg,mask) do { \
+#define ao_spi_get_mask(reg,mask,bus,speed) do {       \
+               ao_spi_get(bus);                        \
+               ao_spi_set_speed(bus,speed);            \
+               (reg) &= ~(mask);                       \
+       } while (0)
+
+#define ao_spi_put_mask(reg,mask,bus) do {             \
        (reg) |= (mask); \
-       ao_mutex_put(&ao_spi_mutex); \
+       ao_spi_put(bus); \
        } while (0)
 
-#define ao_spi_get_bit(bit) do {\
-       ao_mutex_get(&ao_spi_mutex); \
-       (bit) = 0; \
+
+#define ao_spi_get_bit(reg,bit,pin,bus,speed) do {     \
+               ao_spi_get(bus);                        \
+               ao_spi_set_speed(bus,speed);            \
+               pin = 0;                                \
        } while (0)
 
-#define ao_spi_put_bit(bit) do { \
-       (bit) = 1; \
-       ao_mutex_put(&ao_spi_mutex); \
+#define ao_spi_put_bit(reg,bit,pin,bus) do {   \
+               pin = 1;                        \
+               ao_spi_put(bus);                \
        } while (0)
 
+
 /*
  * The SPI mutex must be held to call either of these
  * functions -- this mutex covers the entire SPI operation,
  * from chip select low to chip select high
  */
 
+#if MULTI_SPI
+void
+ao_spi_send(void __xdata *block, uint16_t len, uint8_t bus) __reentrant;
+
 void
-ao_spi_send(void __xdata *block, uint16_t len) __reentrant;
+ao_spi_recv(void __xdata *block, uint16_t len, uint8_t bus) __reentrant;
+#else
+void
+ao_spi_send_bus(void __xdata *block, uint16_t len) __reentrant;
+
+void
+ao_spi_recv_bus(void __xdata *block, uint16_t len) __reentrant;
+
+#define ao_spi_send(block, len, bus) ao_spi_send_bus(block, len)
+#define ao_spi_recv(block, len, bus) ao_spi_recv_bus(block, len)
+#endif
 
+#if AO_SPI_SLAVE
 void
-ao_spi_recv(void __xdata *block, uint16_t len) __reentrant;
+ao_spi_send_wait(void);
+
+void
+ao_spi_recv_wait(void);
+#endif
 
 void
 ao_spi_init(void);
 
+#define token_paster(x,y)      x ## y
+#define token_paster3(x,y,z)   x ## y ## z
+#define token_evaluator(x,y)   token_paster(x,y)
+#define token_evaluator3(x,y,z)        token_paster3(x,y,z)
+
+#define ao_spi_init_cs(port, mask) do {                        \
+               port |= mask;                           \
+               token_evaluator(port,DIR) |= mask;      \
+               token_evaluator(port,SEL) &= ~mask;     \
+       } while (0)
+
+#define cc1111_enable_output(port,dir,sel,pin,bit,v) do {      \
+               pin = v;                                        \
+               dir |= (1 << bit);                              \
+               sel &= ~(1 << bit);                             \
+       } while (0)
+
+#define disable_unreachable    _Pragma("disable_warning 126")
+
+#define ao_enable_output(port,bit,pin,v) cc1111_enable_output(port,token_evaluator(port,DIR), token_evaluator(port,SEL), pin, bit, v)
+#define ao_gpio_set(port, bit, pin, v) ((pin) = (v))
+