altos: Massive product config cleanup

[fw/altos] / src / cc1111 / ao_arch.h

diff --git a/src/cc1111/ao_arch.h b/src/cc1111/ao_arch.h
index eb8ce9be01bf835ddd5cbf7ac505029af05a1dd3..9d0643b4ba4f0f7d0135b7b81b4a45859d619a60 100644 (file)
--- a/src/cc1111/ao_arch.h
+++ b/src/cc1111/ao_arch.h
@@ -45,7 +45,7 @@
        ao_delay(AO_SEC_TO_TICKS(2));                           \
        } while (0)
        
-#define ao_arch_nop()  _asm nop _endasm
+#define ao_arch_nop()  __asm nop __endasm
 #define ao_arch_interrupt(n)   __interrupt n
 
 #define ao_arch_naked_declare  __naked
@@ -106,7 +106,7 @@ extern __code __at (0x00a6) uint32_t ao_radio_cal;
 /* Save current context */
 
 #define ao_arch_save_regs()                                            \
-       _asm                                                            \
+       __asm                                                           \
        /* Push ACC first, as when restoring the context it must be restored \
         * last (it is used to set the IE register). */                 \
        push    ACC                                                     \
@@ -125,11 +125,11 @@ extern __code __at (0x00a6) uint32_t ao_radio_cal;
        push    ar0                                                     \
        push    ar1                                                     \
        push    PSW                                                     \
-       _endasm;                                                        \
+       __endasm;                                                       \
        PSW = 0;                                                        \
-       _asm                                                            \
+       __asm                                                           \
        push    _bp                                                     \
-       _endasm
+       __endasm
 
 #define ao_arch_save_stack() {                                                 \
                uint8_t stack_len;                                      \
@@ -166,7 +166,7 @@ extern __code __at (0x00a6) uint32_t ao_radio_cal;
                        *stack_ptr++ = *save_ptr++;                     \
                while (--stack_len);                                    \
                                                                        \
-               _asm                                                    \
+               __asm                                                   \
                pop             _bp                                     \
                pop             PSW                                     \
                pop             ar1                                     \
@@ -193,7 +193,7 @@ extern __code __at (0x00a6) uint32_t ao_radio_cal;
                /* Finally pop off the ACC, which was the first register saved. */ \
                pop             ACC                                     \
                ret                                                     \
-               _endasm;                                                \
+               __endasm;                                               \
 }
 
 #define ao_arch_critical(b) __critical { b }
@@ -251,4 +251,77 @@ _ao_xmemcmp(__xdata void *a, __xdata void *b, uint8_t count);
 
 #define ao_xmemcmp(d,s,c) _ao_xmemcmp((d), (s), (c))
 
+struct ao_serial_speed {
+       uint8_t baud;
+       uint8_t gcr;
+};
+
+extern const __code struct ao_serial_speed ao_serial_speeds[];
+
+/*
+ * ao_dma.c
+ */
+
+/* Allocate a DMA channel. the 'done' parameter will be set when the
+ * dma is finished and will be used to wakeup any waiters
+ */
+
+uint8_t
+ao_dma_alloc(__xdata uint8_t * done);
+
+/* Setup a DMA channel */
+void
+ao_dma_set_transfer(uint8_t id,
+                   void __xdata *srcaddr,
+                   void __xdata *dstaddr,
+                   uint16_t count,
+                   uint8_t cfg0,
+                   uint8_t cfg1);
+
+/* Start a DMA channel */
+void
+ao_dma_start(uint8_t id);
+
+/* Manually trigger a DMA channel */
+void
+ao_dma_trigger(uint8_t id);
+
+/* Abort a running DMA transfer */
+void
+ao_dma_abort(uint8_t id);
+
+/* DMA interrupt routine */
+void
+ao_dma_isr(void) ao_arch_interrupt(8);
+
+/* ao_adc.c */
+
+#if HAS_ADC
+/* The A/D interrupt handler */
+void
+ao_adc_isr(void) ao_arch_interrupt(1);
+#endif
+
+#if HAS_USB
+/* USB interrupt handler */
+void
+ao_usb_isr(void) ao_arch_interrupt(6);
+#endif
+
+#if HAS_SERIAL_0
+void
+ao_serial0_rx_isr(void) ao_arch_interrupt(2);
+
+void
+ao_serial0_tx_isr(void) ao_arch_interrupt(7);
+#endif
+
+#if HAS_SERIAL_1
+void
+ao_serial1_rx_isr(void) ao_arch_interrupt(3);
+
+void
+ao_serial1_tx_isr(void) ao_arch_interrupt(14);
+#endif
+
 #endif /* _AO_ARCH_H_ */