altos: Remove 8051 address space specifiers

[fw/altos] / src / avr / ao_pwmin.c

diff --git a/src/avr/ao_pwmin.c b/src/avr/ao_pwmin.c
index 4d96404dca1b07af8850cfa651506e09ec92910d..2d83380f2d43aa64e0a5b938066883ec9ac2d554 100644 (file)
--- a/src/avr/ao_pwmin.c
+++ b/src/avr/ao_pwmin.c
@@ -3,7 +3,8 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -25,19 +26,43 @@
  * project payload developed at Challenger Middle School.  
  */
 
+volatile uint16_t ao_icp3_count = 0;
+volatile uint16_t ao_icp3_last = 0;
+
+uint16_t ao_icp3(void)
+{
+       uint16_t        v;
+       ao_arch_critical(
+               v = ao_icp3_count;
+               );
+       return v;
+}
+
 static void
-ao_pwmin_display(void) __reentrant
+ao_pwmin_display(void) 
 {
-       uint8_t lo = TCNT1L; 
-       uint8_t hi = TCNT1H;
-       uint16_t value = (hi <<8) | lo;
+       /* display the most recent value */
+       printf("icp 3: %5u\n", ao_icp3());
+
+}
 
-       /* now display the value we read */
-       printf("timer 1: %5u",  value);
 
+ISR(TIMER3_CAPT_vect)
+{
+       
+       uint8_t lo = ICR3L; 
+       uint8_t hi = ICR3H;
+       uint16_t ao_icp3_this = (hi <<8) | lo;
+       
+       /* handling counter rollovers */
+       if (ao_icp3_this >= ao_icp3_last)
+               ao_icp3_count = ao_icp3_this - ao_icp3_last;
+       else 
+               ao_icp3_count = ao_icp3_this + (65536 - ao_icp3_last);
+       ao_icp3_last = ao_icp3_this;
 }
 
-__code struct ao_cmds ao_pwmin_cmds[] = {
+const struct ao_cmds ao_pwmin_cmds[] = {
        { ao_pwmin_display,     "p\0PWM input" },
        { 0, NULL },
 };
@@ -46,6 +71,18 @@ void
 ao_pwmin_init(void)
 {
        /* do hardware setup here */
+       TCCR3A = ((0 << WGM31) |        /* normal mode, OCR3A */
+                  (0 << WGM30));        /* normal mode, OCR3A */
+        TCCR3B = ((1 << ICNC3) |        /* input capture noise canceler on */
+                  (0 << ICES3) |        /* input capture on falling edge (don't care) */
+                  (0 << WGM33) |        /* normal mode, OCR3A */
+                  (0 << WGM32) |        /* normal mode, OCR3A */
+                  (3 << CS30));         /* clk/64 from prescaler */
+
+       
+
+        TIMSK3 = (1 << ICIE3);         /* Interrupt on input compare */
+
                /* set the spike filter bit in the TCCR3B register */
 
        ao_cmd_register(&ao_pwmin_cmds[0]);