Merge ccdbg and altos sources into one giant repository

[fw/altos] / s51 / s51.1

diff --git a/s51/s51.1 b/s51/s51.1
index c283950e9b4e69993788c2f585d6426286292abc..f2f59a5286a6709fb96f4a66c5984cc381f3e680 100644 (file)
--- a/s51/s51.1
+++ b/s51/s51.1
@@ -151,14 +151,14 @@ List the things you can get info on.
 This doesn't do anything and is present only to retain compatibility with
 the original 8051 emulator.
 .SH "BOARD BRINGUP DEBUGGING"
 This doesn't do anything and is present only to retain compatibility with
 the original 8051 emulator.
 .SH "BOARD BRINGUP DEBUGGING"

-.PP 
+.PP

 While the original purpose for this program was to connect the source
 debugger with the hardware, it can also be used as a low-level hex debugger
 all on its own. In particular, all of the cc1111 peripherals can be
 manipulated directly from the s51 command line.
 .IP "Starting s51"
 If the CP2103 is plugged in, and the CC1111 is connected correctly, the
 While the original purpose for this program was to connect the source
 debugger with the hardware, it can also be used as a low-level hex debugger
 all on its own. In particular, all of the cc1111 peripherals can be
 manipulated directly from the s51 command line.
 .IP "Starting s51"
 If the CP2103 is plugged in, and the CC1111 is connected correctly, the

-\'s51\' command itself should connect to the device without trouble. 
+\'s51\' command itself should connect to the device without trouble.

 Note that the CP2103 must have the GPIO pins configured correctly as well.
 .IP
 $ s51
 Note that the CP2103 must have the GPIO pins configured correctly as well.
 .IP
 $ s51