doc: add flash-force instructions for TeleBT v3.0

[fw/altos] / doc / updating-firmware.inc

diff --git a/doc/updating-firmware.inc b/doc/updating-firmware.inc
index d28838290c0f7d7195e0f5e6ccd10f3de52004e7..98e04cea6a8220b450f01e8a9235edad654134f8 100644 (file)
--- a/doc/updating-firmware.inc
+++ b/doc/updating-firmware.inc
@@ -27,10 +27,14 @@
        http://www.altusmetrum.org/AltOS/
 
        ifdef::telemega[]
        http://www.altusmetrum.org/AltOS/
 
        ifdef::telemega[]

+

        === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
        === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware

+

        endif::telemega[]
        ifndef::telemega[]
        endif::telemega[]
        ifndef::telemega[]

+

        === Updating EasyMini Firmware
        === Updating EasyMini Firmware

+

        endif::telemega[]
 
                Self-programmable devices are reprogrammed by
        endif::telemega[]
 
                Self-programmable devices are reprogrammed by


@@ -132,6 +136,13 @@
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        
                        of the board. Ground is available on the capacitor
                        next to it, on the end towards the USB wires.
                        

+                       TeleBT v3::
+
+                       Connect pin 4 on the CPU to 3.3V, which can be done by
+                       connecting pin 1 to pin 4.  Pin 1 is the left pin on
+                       the lower edge of the chip when the unit is oriented
+                       such taht the SMA is at the top.
+

                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th
                        TeleBT v4::
 
                        Connect pin 30 on the CPU to ground. Pin 30 is the 6th