doc: add mounting hole spacing information to product outlines

[fw/altos] / doc / telemini-v1-outline.txt

diff --git a/doc/telemini-v1-outline.txt b/doc/telemini-v1-outline.txt
index e331cf8dd5f47276f1953480a07a728b26105579..cbcc57f8a6f1c57007ed4f716d66ca30f35b2716 100644 (file)
--- a/doc/telemini-v1-outline.txt
+++ b/doc/telemini-v1-outline.txt
@@ -5,8 +5,8 @@
 
        This image, when printed, provides a precise template for the
        mounting holes in TeleMini. TeleMini v1 has overall dimensions of
-       0.500 x 1.500 inches, and the mounting holes are sized for use
-       with 2-56 or M2 screws. The holes are located 0.100 inches
-       from the edge of the board in both directions.
+       0.500 x 1.500 inches, and the mounting holes are sized for use with 
+       2-56 or M2 screws. The holes are located 0.100 inches from the edge 
+       of the board in both directions, meaning they are 0.300 inches apart.
 
        image::telemini-v1.svg[align="center"]