altos: Add EasyMega v2.0 to default build

[fw/altos] / doc / telemetrum.inc

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index 9562d99459b9e6794906dd25038660e3ac321bf3..7c9dadb58e9c2a4488b1a0881b373b1704795f57 100644 (file)
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -1,5 +1,9 @@
 == TeleMetrum
 
 == TeleMetrum
 

+       .TeleMetrum v2 Board
+       image::telemetrum-v2.0-th.jpg[width="5.5in"]
+
+       .TeleMetrum v1 Board

        image::telemetrum-v1.1-thside.jpg[width="5.5in"]
 
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
        image::telemetrum-v1.1-thside.jpg[width="5.5in"]
 
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to


@@ -13,6 +17,18 @@
        fin can end of the board, meaning an ideal “simple” avionics
        bay for TeleMetrum should have at least 10 inches of interior length.
 
        fin can end of the board, meaning an ideal “simple” avionics
        bay for TeleMetrum should have at least 10 inches of interior length.
 

+       There are two generations of the TeleMetrum design. The
+       major changes in the v2 generation are:
+
+       * uBlox GPS chip certified for altitude records
+
+       * Higher power radio (40mW vs 10mW)
+
+       * APRS support
+
+       Otherwise, they're the same size, with mounting holes and
+       screw terminals in the same position.
+

        === TeleMetrum Screw Terminals
 
                TeleMetrum has six screw terminals on the end of the board
        === TeleMetrum Screw Terminals
 
                TeleMetrum has six screw terminals on the end of the board


@@ -21,6 +37,7 @@
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 

+               .TeleMetrum Screw Terminals

                [options="header",grid="all",cols="2,3,10"]
                |=========================
                |Terminal #|Terminal Name|Description
                [options="header",grid="all",cols="2,3,10"]
                |=========================
                |Terminal #|Terminal Name|Description