altosdroid: Deal with AltosState changes

[fw/altos] / doc / telemetrum.inc

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index 54185bff2f9d75038f2b808a3e81e4cfc725f413..7c9dadb58e9c2a4488b1a0881b373b1704795f57 100644 (file)
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -17,6 +17,18 @@
        fin can end of the board, meaning an ideal “simple” avionics
        bay for TeleMetrum should have at least 10 inches of interior length.
 
        fin can end of the board, meaning an ideal “simple” avionics
        bay for TeleMetrum should have at least 10 inches of interior length.
 

+       There are two generations of the TeleMetrum design. The
+       major changes in the v2 generation are:
+
+       * uBlox GPS chip certified for altitude records
+
+       * Higher power radio (40mW vs 10mW)
+
+       * APRS support
+
+       Otherwise, they're the same size, with mounting holes and
+       screw terminals in the same position.
+

        === TeleMetrum Screw Terminals
 
                TeleMetrum has six screw terminals on the end of the board
        === TeleMetrum Screw Terminals
 
                TeleMetrum has six screw terminals on the end of the board


@@ -25,6 +37,7 @@
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 

+               .TeleMetrum Screw Terminals

                [options="header",grid="all",cols="2,3,10"]
                |=========================
                |Terminal #|Terminal Name|Description
                [options="header",grid="all",cols="2,3,10"]
                |=========================
                |Terminal #|Terminal Name|Description