doc: Update docs to reference TeleMetrum v3 where appropriate

[fw/altos] / doc / telemetrum.inc

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index fa7d202c19d9395b80b82f4bc75a469e8caa80d4..3247db9553e214dd3d00c15966433380ba29788f 100644 (file)
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -1,10 +1,10 @@
 == TeleMetrum
 
        .TeleMetrum v2 Board
 == TeleMetrum
 
        .TeleMetrum v2 Board

-       image::telemetrum-v2.0-th.jpg[width="5.5in"]
+       image::telemetrum-v2.0-th.jpg[width=400]

 
        .TeleMetrum v1 Board
 
        .TeleMetrum v1 Board

-       image::telemetrum-v1.1-thside.jpg[width="5.5in"]
+       image::telemetrum-v1.1-thside.jpg[width=400]

 
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
        fit inside coupler for 29mm air-frame tubing, but using it in a tube that
 
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
        fit inside coupler for 29mm air-frame tubing, but using it in a tube that


@@ -18,7 +18,7 @@
        bay for TeleMetrum should have at least 10 inches of interior length.
 
        There are two generations of the TeleMetrum design. The
        bay for TeleMetrum should have at least 10 inches of interior length.
 
        There are two generations of the TeleMetrum design. The

-       major changes in the v2 generation are:
+       major changes after v1 generation are:

 
        * uBlox GPS chip certified for altitude records
 
 
        * uBlox GPS chip certified for altitude records
 


@@ -37,8 +37,9 @@
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 
                circuits. Using the picture above and starting from the top,
                the terminals are as follows:
 

+               .TeleMetrum Screw Terminals

                [options="header",grid="all",cols="2,3,10"]
                [options="header",grid="all",cols="2,3,10"]

-               |=========================
+               |===

                |Terminal #|Terminal Name|Description
                |1      |Switch Output  |Switch connection to flight computer
                |2      |Switch Input   |Switch connection to positive battery terminal
                |Terminal #|Terminal Name|Description
                |1      |Switch Output  |Switch connection to flight computer
                |2      |Switch Input   |Switch connection to positive battery terminal


@@ -46,7 +47,7 @@
                |4      |Main -         |Main pyro channel connection to pyro circuit
                |5      |Apogee +       |Apogee pyro channel common connection to battery +
                |6      |Apogee -       |Apogee pyro channel connection to pyro circuit
                |4      |Main -         |Main pyro channel connection to pyro circuit
                |5      |Apogee +       |Apogee pyro channel common connection to battery +
                |6      |Apogee -       |Apogee pyro channel connection to pyro circuit

-               |========================
+               |===

 
        === Using a Separate Pyro Battery with TeleMetrum
 
 
        === Using a Separate Pyro Battery with TeleMetrum