doc: Update docs to reference TeleMetrum v3 where appropriate

[fw/altos] / doc / telemetrum.inc

diff --git a/doc/telemetrum.inc b/doc/telemetrum.inc
index 7c9dadb58e9c2a4488b1a0881b373b1704795f57..3247db9553e214dd3d00c15966433380ba29788f 100644 (file)
--- a/doc/telemetrum.inc
+++ b/doc/telemetrum.inc
@@ -1,10 +1,10 @@
 == TeleMetrum
 
        .TeleMetrum v2 Board
-       image::telemetrum-v2.0-th.jpg[width="5.5in"]
+       image::telemetrum-v2.0-th.jpg[width=400]
 
        .TeleMetrum v1 Board
-       image::telemetrum-v1.1-thside.jpg[width="5.5in"]
+       image::telemetrum-v1.1-thside.jpg[width=400]
 
        TeleMetrum is a 1 inch by 2¾ inch circuit board.  It was designed to
        fit inside coupler for 29mm air-frame tubing, but using it in a tube that
@@ -18,7 +18,7 @@
        bay for TeleMetrum should have at least 10 inches of interior length.
 
        There are two generations of the TeleMetrum design. The
-       major changes in the v2 generation are:
+       major changes after v1 generation are:
 
        * uBlox GPS chip certified for altitude records
 
@@ -39,7 +39,7 @@
 
                .TeleMetrum Screw Terminals
                [options="header",grid="all",cols="2,3,10"]
-               |=========================
+               |===
                |Terminal #|Terminal Name|Description
                |1      |Switch Output  |Switch connection to flight computer
                |2      |Switch Input   |Switch connection to positive battery terminal
@@ -47,7 +47,7 @@
                |4      |Main -         |Main pyro channel connection to pyro circuit
                |5      |Apogee +       |Apogee pyro channel common connection to battery +
                |6      |Apogee -       |Apogee pyro channel connection to pyro circuit
-               |========================
+               |===
 
        === Using a Separate Pyro Battery with TeleMetrum