doc: Remove telemini v2.0. Add telemega v2.0

[fw/altos] / doc / telemega.inc

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 4383f228e34af27ccbb119081c0cacea171a99f2..55f77bc48771d6db476df1adb85c4325cdd0378e 100644 (file)
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -9,6 +9,18 @@
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 

+       TeleMega v2.0 has a few minor changes from v1.0:
+
+       * Companion connector matches EasyMega functions
+       * Serial port connector replaced with servo connector with
+         support for up to 4 PWM channels.
+       * Radio switched from cc1120 to cc1200.
+
+       None of these affect operation using the stock firmware, but
+       they do mean that the device needs different firmware to
+       operate correctly, so make sure you load the right firmware
+       when reflashing the device.
+

        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of
        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of