doc: Switch to asciidoctor to format docs

[fw/altos] / doc / telemega.inc

diff --git a/doc/telemega.inc b/doc/telemega.inc
index 12db50d62bd91ac4913cad6671cc30578e39bfb7..0975172f6c6f189dd5ba55f72b3079938eb382a7 100644 (file)
--- a/doc/telemega.inc
+++ b/doc/telemega.inc
@@ -1,6 +1,7 @@
 == TeleMega
 
 == TeleMega
 

-       image::telemega-v1.0-top.jpg[width="5.5in"]
+       .TeleMega Board
+       image::telemega-v1.0-top.jpg[width=400]

 
        TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
        designed to easily fit in a 38mm coupler. Like TeleMetrum,
 
        TeleMega is a 1¼ inch by 3¼ inch circuit board. It was
        designed to easily fit in a 38mm coupler. Like TeleMetrum,


@@ -8,11 +9,24 @@
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 
        the board is aligned with the flight axis. It can be mounted
        either antenna up or down.
 

+       TeleMega v2.0 has a few minor changes from v1.0:
+
+       * Companion connector matches EasyMega functions
+       * Serial port connector replaced with servo connector with
+         support for up to 4 PWM channels.
+       * Radio switched from cc1120 to cc1200.
+
+       None of these affect operation using the stock firmware, but
+       they do mean that the device needs different firmware to
+       operate correctly, so make sure you load the right firmware
+       when reflashing the device.
+

        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of
                the board opposite the telemetry antenna. They are as follows:
 
        === TeleMega Screw Terminals
 
                TeleMega has two sets of nine screw terminals on the end of
                the board opposite the telemetry antenna. They are as follows:
 

+               .TeleMega Screw Terminals

                [options="header",grid="all",cols="2,3,10"]
                |====
                |Terminal #|Terminal Name|Description
                [options="header",grid="all",cols="2,3,10"]
                |====
                |Terminal #|Terminal Name|Description