Version 1.9.6.2

[fw/altos] / doc / telelaunch-operation.inc

diff --git a/doc/telelaunch-operation.inc b/doc/telelaunch-operation.inc
index 4ad50344e308050a80a38754d2f74669ed6851fb..db71d91869bc6c1360355663b8d3b657b5709944 100644 (file)
--- a/doc/telelaunch-operation.inc
+++ b/doc/telelaunch-operation.inc
@@ -55,7 +55,7 @@
                The TeleLCO unit should be placed on a table at the Launch
                Control position.  It can be helpful for the LCO (the human(s)
                too, not just the electronics!) to be provided with some 
-               shade, but the use of transreflexive LCDs for the digit 
+               shade, but the use of reflective LCDs for the digit 
                displays and ultri-bright LEDs make TeleLCO operation 
                reasonable even in direct sunlight.
 
@@ -92,7 +92,7 @@
                Put a rocket on a launch rail / rod, and connect whip clips
                from a pad output on a TeleFire unit to the motor igniter.
                Verify igniter continuity using the LED associated with that
-               output.  Green is good, red is bad.
+               output.  Green is good.
 
                Switch the TeleFire unit from 'Safe' to 'Arm', at which point
                it will start "chirping" to indicate that it is "armed and