--- /dev/null
+== TeleGPS Quick Start Guide
+
+ TeleGPS is designed to be easy to use. Requiring no external
+ components, flying takes just a few steps.
+
+ First, download and install the software from
+ http://altusmetrum.org/AltOS. This will make sure that
+ you have the right device drivers installed.
+
+ Next, plug in the battery and USB cable and connect TeleGPS to
+ your computer. This will charge the battery and allow you to
+ configure the device.
+
+ Start the TeleGPS application and set the callsign and frequency
+ on your TeleGPS device; refer to the Configure TeleGPS section
+ in the TeleGPS Application chapter for instructions.
+
+ Unplug TeleGPS when the battery charger light goes green. This
+ will enable the radio and logging portions of the TeleGPS
+ firmware.
+
+ Connect TeleDongle to your computer and start TeleGPS or start
+ AltosDroid on your android device and connect to TeleBT. Set the
+ frequency to match the TeleGPS and you should be receiving telemetry.