altos: Add EasyMega v2.0 to default build

[fw/altos] / doc / pyro-channels.inc

diff --git a/doc/pyro-channels.inc b/doc/pyro-channels.inc
index 7fd0641245947739811ccd2e6b547d459bdea011..ab5baef0e37cc68d7bca8c24e59a22c28d9bd0a1 100644 (file)
--- a/doc/pyro-channels.inc
+++ b/doc/pyro-channels.inc
@@ -42,9 +42,13 @@ launch pad and initialize the system.
   of less than that value.
   ====
 
   of less than that value.
   ====
 

-Flight Time:: Time since boost was detected. Select a value and choose
-whether to activate the pyro channel before or after that amount of
-time.
+Flight Time:: Time since launch. Select a value and choose whether to
+activate the pyro channel before or after that amount of time.
+
+[WARNING]
+Firmware versions older than 1.8.6 have a bug which resets the time
+since launch to zero each time a motor starts burning. Update firmware
+to get the correct behavior.

 
 Ascending:: A deprecated configuration value which was the same as
 setting Ascent rate > 0. Existing configurations using this will be
 
 Ascending:: A deprecated configuration value which was the same as
 setting Ascent rate > 0. Existing configurations using this will be


@@ -57,7 +61,9 @@ cleared and must be reconfigured by the user.
 After Motor:: The flight software counts each time the rocket starts
 accelerating and then decelerating (presumably due to a motor or
 motors burning). Use this value for multi-staged or multi-airstart
 After Motor:: The flight software counts each time the rocket starts
 accelerating and then decelerating (presumably due to a motor or
 motors burning). Use this value for multi-staged or multi-airstart

-launches.
+launches. As of version 1.8.6 firmware, this checks to make sure at
+least this many motors have burned. Before version 1.8.6, this checked
+to make sure that exactly this many motors had burned.

 
 Delay:: Once the other parameters all become true, a timer is
 started for the specified amount of time. While the timer is running,
 
 Delay:: Once the other parameters all become true, a timer is
 started for the specified amount of time. While the timer is running,