doc: Get images and tables all centered and labeled

[fw/altos] / doc / micropeak.txt

diff --git a/doc/micropeak.txt b/doc/micropeak.txt
index d62e463357df7c50c8dd8b93fb38459bbeec4b9c..085be0ed2a7bbaa2ecd2f2c7939995aede659caa 100644 (file)
--- a/doc/micropeak.txt
+++ b/doc/micropeak.txt
@@ -78,7 +78,7 @@
 == The MicroPeak USB adapter
 
        .MicroPeak USB Adapter
-       image::MicroPeakUSB-2.0.jpg[width="4.5in"]
+       image::MicroPeakUSB-2.0.jpg[width="4.5in",align="center"]
 
        MicroPeak stores barometric pressure information for the first
        48 seconds of the flight in on-board non-volatile memory. The
@@ -103,25 +103,25 @@
 
                * Start the MicroPeak application.
 
-                 image::micropeak-nofont.svg[width="0.5in"]
+                 image::micropeak-nofont.svg[width="0.5in",align="center"]
 
                * Click on the Download button at the top of the
                   window.
 
                  .MicroPeak Application
-                 image::micropeak-app.png[width="4.5in"]
+                 image::micropeak-app.png[width="4.5in",align="center"]
 
                * Select from the listed devices. There will probably
                  be only one.
 
                  .MicroPeak Device Dialog
-                 image::micropeak-device-dialog.png[width="2.3in"]
+                 image::micropeak-device-dialog.png[width="2.3in",align="center"]
 
                * The application will now wait until it receives
                  valid data from the MicroPeak USB adapter.
 
                  .MicroPeak Download Dialog
-                 image::micropeak-download.png[width="2in"]
+                 image::micropeak-download.png[width="2in",align="center"]
 
                * The MicroPeak USB adapter has a small
                  phototransistor under the hole in the center of the
@@ -133,7 +133,7 @@
                  MicroPeak board itself.
 
                  .MicroPeak Downloading
-                 image::MicroPeakUSB-2.0-inuse.jpg[width="4.5in"]
+                 image::MicroPeakUSB-2.0-inuse.jpg[width="4.5in",align="center"]
 
                * After the maximum flight height is reported,
                  MicroPeak will pause for a few seconds, blink the
@@ -145,7 +145,7 @@
                  MicroPeak board and try again.
 
                  .MicroPeak Save Dialog
-                 image::micropeak-save-dialog.png[width="2.3in"]
+                 image::micropeak-save-dialog.png[width="2.3in",align="center"]
 
                * Once the data are saved, a graph will be displayed
                  with height, speed and acceleration values computed
@@ -185,7 +185,7 @@
                ==== MicroPeak Graphs
 
                        .MicroPeak Graph
-                       image::micropeak-graph.png[width="4.5in"]
+                       image::micropeak-graph.png[width="4.5in",align="center"]
 
                        Under the Graph tab, the height, speed and acceleration values
                        are displayed together. You can zoom in on the graph by
@@ -196,7 +196,7 @@
                ==== MicroPeak Flight Statistics
 
                        .MicroPeak Flight Statistics
-                       image::micropeak-statistics.png[width="4.5in"]
+                       image::micropeak-statistics.png[width="4.5in",align="center"]
 
                        The Statistics tab presents overall data from
                        the flight. Note that the Maximum height value
@@ -211,7 +211,7 @@
                ==== Raw Flight Data
 
                        .MicroPeak Raw Flight Data
-                       image::micropeak-raw-data.png[width="4.5in"]
+                       image::micropeak-raw-data.png[width="4.5in",align="center"]
 
                        A table consisting of the both the raw barometric pressure
                        data and values computed from that for each recorded time.
@@ -219,7 +219,7 @@
                ==== Configuring the Graph
 
                        .MicroPeak Graph Configuration
-                       image::micropeak-graph-configure.png[width="4.5in"]
+                       image::micropeak-graph-configure.png[width="4.5in",align="center"]
 
                        This selects which graph elements to show, and lets you
                        switch between metric and imperial units
@@ -227,7 +227,7 @@
        === Setting MicroPeak Preferences
 
                        .MicroPeak Preferences
-                       image::micropeak-preferences.png[width="1.8in"]
+                       image::micropeak-preferences.png[width="1.8in",align="center"]
 
                        The MicroPeak application has a few user settings which are
                        configured through the Preferences dialog, which can be