Break out common pieces from TeleGPS and AltusMetrum

[fw/altos] / doc / installation.inc

diff --git a/doc/installation.inc b/doc/installation.inc
index 444332981d1001b0e61c54e7e5e987adfbf0552a..32d819845319c8351d65543537ec55a748feef6d 100644 (file)
--- a/doc/installation.inc
+++ b/doc/installation.inc
@@ -22,13 +22,14 @@
        Check polarity and voltage before connecting any battery not
        purchased from Altus Metrum or Spark Fun.
 
        Check polarity and voltage before connecting any battery not
        purchased from Altus Metrum or Spark Fun.
 

-       By default, we use the unregulated output of the battery directly
-       to fire ejection charges.  This works marvelously with standard
-       low-current e-matches like the J-Tek from MJG Technologies, and with
-       Quest Q2G2 igniters.  However, if you want or need to use a separate
-       pyro battery, check out the “External Pyro Battery” section in this
-       manual for instructions on how to wire that up. The altimeters are
-       designed to work with an external pyro battery of no more than 15 volts.
+       By default, we use the unregulated output of the battery
+       directly to fire ejection charges.  This works marvelously
+       with standard low-current e-matches like the J-Tek from MJG
+       Technologies, and with Quest Q2G2 igniters.  However, if you
+       want or need to use a separate pyro battery, check out
+       <<_using_a_separate_pyro_battery>> for instructions on how to wire
+       that up. The altimeters are designed to work with an external
+       pyro battery of no more than 15 volts.

 
        Ejection charges are wired directly to the screw terminal block
        at the aft end of the altimeter.  You'll need a very small straight
 
        Ejection charges are wired directly to the screw terminal block
        at the aft end of the altimeter.  You'll need a very small straight