doc: Update docs to reference TeleMetrum v3 where appropriate

[fw/altos] / doc / getting-started.inc

diff --git a/doc/getting-started.inc b/doc/getting-started.inc
index decaf4d43203fe0600c48a49e4b0707d4890a7b1..5e60986ad1e6baecc1e8005348790f39711be4ff 100644 (file)
--- a/doc/getting-started.inc
+++ b/doc/getting-started.inc
@@ -42,13 +42,14 @@
                to trickle charge. It can take several hours to fully recharge a
                deeply discharged battery.
 
-               TeleMetrum v2.0, TeleMega and EasyMega use a higher power battery charger,
-               allowing them to charge the battery while running the board at
-               maximum power. When the battery is charging, or when the board
-               is consuming a lot of power, the red LED will be lit. When the
-               battery is fully charged, the green LED will be lit. When the
-               battery is damaged or missing, both LEDs will be lit, which
-               appears yellow.
+               TeleMetrum v2 or newer, TeleMega and EasyMega use a
+               higher power battery charger, allowing them to charge
+               the battery while running the board at maximum
+               power. When the battery is charging, or when the board
+               is consuming a lot of power, the red LED will be
+               lit. When the battery is fully charged, the green LED
+               will be lit. When the battery is damaged or missing,
+               both LEDs will be lit, which appears yellow.
                ====
                endif::telemetrum,telemega,easymega[]