doc: Add titles to all figures

[fw/altos] / doc / easymini.inc

diff --git a/doc/easymini.inc b/doc/easymini.inc
index 40cb3e1a96fdc546dce2aae2981bfd489ef73984..a7f06c014c66f8e4b6ba9f398f474baada087722 100644 (file)
--- a/doc/easymini.inc
+++ b/doc/easymini.inc
@@ -1,5 +1,6 @@
 == EasyMini
 
+       .EasyMini Board
        image::easymini-top.jpg[width="5.5in"]
 
        EasyMini is built on a 0.8 inch by 1½ inch circuit board. It's
@@ -52,6 +53,29 @@
                |Switch connection to positive battery terminal
                |====
 
+       === Connecting A Battery To TeleMini v2.0
+
+               There are two possible battery connections on
+               EasyMini. You can use either method; both feed
+               through the power switch terminals.
+
+               One battery connection is the standard Altus Metrum
+               white JST plug. This mates with single-cell Lithium
+               Polymer batteries sold by Altus Metrum.
+
+               The other is a pair of screw terminals marked 'Battery
+               +' and 'Battery -'. Connect a battery from 4 to 12
+               volts to these terminals, being careful to match polarity.
+
+       === Charging Lithium Batteries
+
+               Because EasyMini allows for batteries other than the
+               standard Altus Metrum Lithium Polymer cells, it cannot
+               incorporate a battery charger circuit. Therefore, when
+               using a Litium Polymer cell, you'll need an external
+               charger. These are available from Altus Metrum, or
+               from Spark Fun.
+
        === Using a Separate Pyro Battery with EasyMini
        
                As described above, using an external pyro battery involves