<surname>Towns</surname>
</author>
<copyright>
- <year>2011</year>
+ <year>2012</year>
<holder>Bdale Garbee and Keith Packard</holder>
</copyright>
<legalnotice>
</para>
</legalnotice>
<revhistory>
+ <revision>
+ <revnumber>1.1.1</revnumber>
+ <date>16 September 2012</date>
+ <revremark>
+ Updated for software version 1.1.1 Version 1.1.1 fixes a few
+ bugs found in version 1.1.
+ </revremark>
+ </revision>
+ <revision>
+ <revnumber>1.1</revnumber>
+ <date>13 September 2012</date>
+ <revremark>
+ Updated for software version 1.1. Version 1.1 has new
+ features but is otherwise compatible with version 1.0.
+ </revremark>
+ </revision>
<revision>
<revnumber>1.0</revnumber>
<date>24 August 2011</date>
apogee and main ejection charges. All Altus Metrum products are
designed for use with single-cell batteries with 3.7 volts nominal.
</para>
+ <para>
+ The battery connectors are a standard 2-pin JST connector and
+ match batteries sold by Spark Fun. These batteries are
+ single-cell Lithium Polymer batteries that nominally provide 3.7
+ volts. Other vendors sell similar batteries for RC aircraft
+ using mating connectors, however the polarity for those is
+ generally reversed from the batteries used by Altus Metrum
+ products. In particular, the Tenergy batteries supplied for use
+ in Featherweight flight computers are not compatible with Altus
+ Metrum flight computers or battery chargers. <emphasis>Check
+ polarity and voltage before connecting any battery not purchased
+ from Altus Metrum or Spark Fun.</emphasis>
+ </para>
<para>
By default, we use the unregulated output of the Li-Po battery directly
to fire ejection charges. This works marvelously with standard
<para>
You can monitor the operation of the radio link by watching the
lights on the devices. The red LED will flash each time a packet
- is tramsitted, while the green LED will light up on TeleDongle when
+ is transmitted, while the green LED will light up on TeleDongle when
it is waiting to receive a packet from the altimeter.
</para>
</section>
be below 10m/s when under the main parachute in a dual-deploy flight.
</para>
<para>
- For TeleMetrum altimeters, you can locate the rocket in the sky
- using the elevation and
- bearing information to figure out where to look. Elevation is
- in degrees above the horizon. Bearing is reported in degrees
- relative to true north. Range can help figure out how big the
- rocket will appear. Note that all of these values are relative
- to the pad location. If the elevation is near 90°, the rocket
- is over the pad, not over you.
+ For TeleMetrum altimeters, you can locate the rocket in the
+ sky using the elevation and bearing information to figure
+ out where to look. Elevation is in degrees above the
+ horizon. Bearing is reported in degrees relative to true
+ north. Range can help figure out how big the rocket will
+ appear. Ground Distance shows how far it is to a point
+ directly under the rocket and can help figure out where the
+ rocket is likely to land. Note that all of these values are
+ relative to the pad location. If the elevation is near 90°,
+ the rocket is over the pad, not over you.
</para>
<para>
Finally, the igniter voltages are reported in this tab as
your local radio regulations.
</para>
</section>
+ <section>
+ <title>Imperial Units</title>
+ <para>
+ This switches between metric units (meters) and imperial
+ units (feet and miles). This affects the display of values
+ use during flight monitoring, data graphing and all of the
+ voice announcements. It does not change the units used when
+ exporting to CSV files, those are always produced in metric units.
+ </para>
+ </section>
<section>
<title>Font Size</title>
<para>
</para>
</section>
</section>
+ <section>
+ <title>Configure Groundstation</title>
+ <para>
+ Select this button and then select a TeleDongle Device from the list provided.
+ </para>
+ <para>
+ The first few lines of the dialog provide information about the
+ connected device, including the product name,
+ software version and hardware serial number. Below that are the
+ individual configuration entries.
+ </para>
+ <para>
+ Note that the TeleDongle itself doesn't save any configuration
+ data, the settings here are recorded on the local machine in
+ the Java preferences database. Moving the TeleDongle to
+ another machine, or using a different user account on the same
+ machine will cause settings made here to have no effect.
+ </para>
+ <para>
+ At the bottom of the dialog, there are three buttons:
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ Save. This writes any changes to the
+ local Java preferences file. If you don't
+ press this button, any changes you make will be lost.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Reset. This resets the dialog to the most recently saved values,
+ erasing any changes you have made.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Close. This closes the dialog. Any unsaved changes will be
+ lost.
+ </para>
+ </listitem>
+ </itemizedlist>
+ <para>
+ The rest of the dialog contains the parameters to be configured.
+ </para>
+ <section>
+ <title>Frequency</title>
+ <para>
+ This configures the frequency to use for both telemetry and
+ packet command mode. Set this before starting any operation
+ involving packet command mode so that it will use the right
+ frequency. Telemetry monitoring mode also provides a menu to
+ change the frequency, and that menu also sets the same Java
+ preference value used here.
+ </para>
+ </section>
+ <section>
+ <title>Radio Calibration</title>
+ <para>
+ The radios in every Altus Metrum device are calibrated at the
+ factory to ensure that they transmit and receive on the
+ specified frequency. To change a TeleDongle's calibration,
+ you must reprogram the unit completely, so this entry simply
+ shows the current value and doesn't allow any changes.
+ </para>
+ </section>
+ </section>
<section>
<title>Flash Image</title>
<para>
</listitem>
<listitem>
<para>
- RF interface for battery charging, configuration, and data recovery.
+ RF interface for configuration, and data recovery.
</para>
</listitem>
<listitem>
<appendix
xmlns:xi="http://www.w3.org/2001/XInclude">
<title>Release Notes</title>
+ <xi:include href="release-notes-1.1.1.xsl" xpointer="xpointer(/article/*)"/>
<xi:include href="release-notes-1.1.xsl" xpointer="xpointer(/article/*)"/>
<xi:include href="release-notes-1.0.1.xsl" xpointer="xpointer(/article/*)"/>
<xi:include href="release-notes-0.9.2.xsl" xpointer="xpointer(/article/*)"/>
projects / fw / altos / blobdiff