- <para>
- For “self programming”, connect USB to the device to be
- programmed and push the 'Flash Image' button. That will
- present a dialog box listing all of the connected
- devices. Carefully select the device to be programmed.
- </para>
- <para>
- For “pair programming”, once you have the programmer and
- target devices connected, push the 'Flash Image' button. That
- will present a dialog box listing all of the connected
- devices. Carefully select the programmer device, not the
- device to be programmed.
- </para>
- <para>
- Next, select the image to flash to the device. These are named
- with the product name and firmware version. The file selector
- will start in the directory containing the firmware included
- with the AltosUI package. Navigate to the directory containing
- the desired firmware if it isn't there.
- </para>
- <para>
- Next, a small dialog containing the device serial number and
- RF calibration values should appear. If these values are
- incorrect (possibly due to a corrupted image in the device),
- enter the correct values here.
- </para>
- <para>
- Finally, a dialog containing a progress bar will follow the
- programming process.
- </para>
- <para>
- When programming is complete, the target device will
- reboot. Note that if a pair programmed target device is
- connected via USB, you will have to unplug it and then plug it
- back in for the USB connection to reset so that you can
- communicate with the device again.
- </para>