doc: "rocketry electronics" instead of listing products

[fw/altos] / doc / altusmetrum.xsl

diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 9020881f11d2127b7f14814613a7caf781e3d7f5..cb4af64bd2fa2a64db2d2625fe0e7af9fa4e72ab 100644 (file)
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -3,7 +3,7 @@
   "/usr/share/xml/docbook/schema/dtd/4.5/docbookx.dtd">
 <book>
   <title>The Altus Metrum System</title>
-  <subtitle>An Owner's Manual for TeleMetrum, TeleMini, TeleDongle and TeleBT Devices</subtitle>
+  <subtitle>An Owner's Manual for Altus Metrum Rocketry Electronics</subtitle>
   <bookinfo>
     <author>
       <firstname>Bdale</firstname>
@@ -549,7 +549,7 @@ NAR #88757, TRA #12200
        fit inside coupler for 29mm air-frame tubing, but using it in a tube that
        small in diameter may require some creativity in mounting and wiring
        to succeed!  The presence of an accelerometer means TeleMetrum should
-       be aligned along the flight axis of the airframe, and by default the 1/4
+       be aligned along the flight axis of the airframe, and by default the ¼
        wave UHF wire antenna should be on the nose-cone end of the board.  The
        antenna wire is about 7 inches long, and wiring for a power switch and
        the e-matches for apogee and main ejection charges depart from the
@@ -2657,7 +2657,7 @@ NAR #88757, TRA #12200
          in the environment and avoid having wire lengths near a
          natural resonant length. Altusmetrum products transmit on the
          70cm amateur band, so you should avoid lengths that are a
-         simple ratio of that length; essentially any multiple of 1/4
+         simple ratio of that length; essentially any multiple of ¼
          of the wavelength (17.5cm).
          </para>
        </listitem>