be explicit in a couple places about only using single-cell LiPo batteries

[fw/altos] / doc / altusmetrum.xsl

diff --git a/doc/altusmetrum.xsl b/doc/altusmetrum.xsl
index 606c8b9945cb8985d9f4d69020b4ef6c58bb6f68..ad08aecc518f763461dae2966efff893532a5c57 100644 (file)
--- a/doc/altusmetrum.xsl
+++ b/doc/altusmetrum.xsl
@@ -258,7 +258,8 @@ NAR #88757, TRA #12200
       A typical TeleMetrum or TeleMini installation involves attaching 
       only a suitable Lithium Polymer battery, a single pole switch for 
       power on/off, and two pairs of wires connecting e-matches for the 
-      apogee and main ejection charges.
+      apogee and main ejection charges.  All Altus Metrum products are 
+      designed for use with single-cell batteries with 3.7 volts nominal.
     </para>
     <para>
       By default, we use the unregulated output of the Li-Po battery directly
@@ -586,7 +587,7 @@ NAR #88757, TRA #12200
       <section>
        <title>Maximum Flight Log</title>
        <para>
-         TeleMetrum version 1.1 has 2MB of on-board flash storage,
+         TeleMetrum version 1.1 and 1.2 have 2MB of on-board flash storage,
          enough to hold over 40 minutes of data at full data rate
          (100 samples/second). TeleMetrum 1.0 has 1MB of on-board
          storage. As data are stored at a reduced rate during descent
@@ -602,7 +603,7 @@ NAR #88757, TRA #12200
        </para>
        <para>
          All of the configuration data is also stored in the flash
-         memory, which consumes 64kB on TeleMetrum v1.1 and 256B on
+         memory, which consumes 64kB on TeleMetrum v1.1/v1.2 and 256B on
          TeleMetrum v1.0. This configuration space is not available
          for storing flight log data.
        </para>
@@ -619,7 +620,7 @@ NAR #88757, TRA #12200
        </para>
        <para>
          The default size, 192kB, allows for 10 flights of storage on
-         TeleMetrum v1.1 and 5 flights on TeleMetrum v1.0. This
+         TeleMetrum v1.1/v1.2 and 5 flights on TeleMetrum v1.0. This
          ensures that you won't need to erase the memory before
          flying each time while still allowing more than sufficient
          storage for each flight.
@@ -1447,8 +1448,9 @@ NAR #88757, TRA #12200
         <para>
           In the rocket itself, you just need a <ulink url="http://www.altusmetrum.org/TeleMetrum/">TeleMetrum</ulink> or
          <ulink url="http://www.altusmetrum.org/TeleMini/">TeleMini</ulink> board and
-          a Li-Po rechargeable battery.  An 860mAh battery weighs less than a 9V
-          alkaline battery, and will run a TeleMetrum for hours.
+          a single-cell, 3.7 volt nominal Li-Po rechargeable battery.  An 
+         850mAh battery weighs less than a 9V alkaline battery, and will 
+         run a TeleMetrum for hours.
          A 110mAh battery weighs less than a triple A battery and will run a TeleMetrum for
          a few hours, or a TeleMini for much (much) longer.
         </para>
@@ -1842,7 +1844,7 @@ NAR #88757, TRA #12200
         </listitem>
         <listitem>
           Select the image you want put on the TeleMetrum, which should have a
-          name in the form telemetrum-v1.1-1.0.0.ihx.  It should be visible
+          name in the form telemetrum-v1.2-1.0.0.ihx.  It should be visible
        in the default directory, if not you may have to poke around
        your system to find it.
         </listitem>