first five seconds of operation.
</para>
<para>
- At power on, you will hear three beeps or see three flashes
- (“S” in Morse code for start up) and then a pause while
- the altimeter completes initialization and self test, and decides
- which mode to enter next.
+ At power on, the altimeter will beep out the battery voltage
+ to the nearest tenth of a volt. Each digit is represented by
+ a sequence of short “dit” beeps, with a pause between
+ digits. A zero digit is represented with one long “dah”
+ beep. Then there will be a short pause while the altimeter
+ completes initialization and self test, and decides which mode
+ to enter next.
</para>
<para>
Here's a short summary of all of the modes and the beeping (or
<row>
<entry>Startup</entry>
<entry>S</entry>
- <entry>dit dit dit</entry>
+ <entry>battery voltage in decivolts</entry>
<entry>
<para>
Calibrating sensors, detecting orientation.
<informalfigure>
<mediaobject id="TeleMegaTemplate">
<imageobject>
- <imagedata format="SVG" fileref="telemega-outline.svg"/>
+ <imagedata format="SVG" fileref="telemega.svg"
+ scalefit="0" scale="100" align="center" />
</imageobject>
</mediaobject>
</informalfigure>
<informalfigure>
<mediaobject id="TeleMetrumTemplate">
<imageobject>
- <imagedata format="SVG" fileref="telemetrum.svg"/>
+ <imagedata format="SVG" fileref="telemetrum.svg"
+ scalefit="0" scale="100" align="center" />
</imageobject>
</mediaobject>
</informalfigure>
<informalfigure>
<mediaobject id="MiniTemplate">
<imageobject>
- <imagedata format="SVG" fileref="easymini-outline.svg"/>
+ <imagedata format="SVG" fileref="easymini.svg"
+ scalefit="0" scale="100" align="center" />
</imageobject>
</mediaobject>
</informalfigure>
<informalfigure>
<mediaobject id="TeleMiniTemplate">
<imageobject>
- <imagedata format="SVG" fileref="telemini.svg"/>
+ <imagedata format="SVG" fileref="telemini.svg"
+ scalefit="0" scale="100" align="center" />
</imageobject>
</mediaobject>
</informalfigure>