+altos (1.6.5-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * doc: Add install-html script
+ * Bump android version to 13
+ * ao-tools/ao-chaosread: Document length (-l) option
+ * altosdroid: Deal with multiple installed android SDKs
+ * Mark testing version 1.6.4.1
+ * altosui: Deliver firmware for Tmega 2.0 and TBT 3.0 for Windows too
+ * altos: Block interrupts while waking tasks sleeping on timers.
+ * altos: Move comment in ao_sleep_for next to related code
+ * altos/stm: remove ao_dma_abort
+ * altos/stm: use 0xff for dma mutex value for allocated mutexes
+ * altos/stm: Add more SPI status register bits
+ * altos/stm: Change ao_spi_send_sync definition to take const source
+ * altos: Add STM DMA debugging
+ * altos: Add STM SPI debugging
+ * altos/stm: move spi execution to common ao_spi_run
+ * altos/stm: Clean up spi_enable/disable_index functions
+ * altos/stm: Add better byte-level SPI api
+ * altos/drivers: Use more reliable byte interface for CC1120 reception
+ * altos: Add debug check for irq block when editing task queues
+ * altos: cc1200: use FIFO threshold pin output for APRS buffering
+ * altos: Make ao_delay(0) not wait forever
+ * altos/telemini-v2.0: Remove show tasks command
+ * altos: Make task list output more useful
+ * altos/stm: clean up ao_exti_enable
+ * altos: Leave USB enabled in flight with -DDEBUG=1
+ * altos: Use FIFO_THR pin for cc1120 transmit buffering
+ * Bump to testing version 1.6.4.2
+ * altos/cc1111: Remove 'show tasks' command
+ * Bump to 1.6.5. Add preliminary release notes
+ * Credit Chuck Haskin for helping fix the SPI bug.
+ * doc: Build 1.6.5 release notes
+
+ [ Bdale Garbee ]
+ * switch libgtk-3-bin build-dep to gtk-update-icon-cache, closes: #825455
+ * updating ChangeLog for 1.6.5 release
+
+ -- Bdale Garbee <bdale@gag.com> Mon, 04 Jul 2016 23:48:50 +0200
+
+altos (1.6.4-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * altos/cc1111: Use SW to drive UART RTS pin
+ * Bump version to 1.6.3.1
+ * altosui/telegps: Ship firmware for new hardware
+ * altosdroid: Check for closed before writing/reading bluetooth
+ * Publish firmware with keithp-fat
+ * Add TeleMega to spec list. Add TeleGPS RF output.
+ * altoslib: Switch distance from m/ft to km/miles for large values
+ * altoslib: Remove some debug printf calls
+ * altosuilib: Rate limit map loading pacifier updates
+ * altoslib: Allow map preloading to be aborted
+ * altosdroid: Rate limit map loading pacifier
+ * altosuilib: Don't flicker missing voltages when changing units
+ * doc: Start update for 1.6.4
+ * altoslib: Clean up map file and url handling
+ * altosdroid: make disconnect stick past pause/restart
+ * altoslib: Get rid of AltosMap from AltosMapLoader
+ * telegps: Adapt to distance units switching changes
+ * Bump android app version
+ * Bump java library versions
+ * Automatically run 'git submodule update' if necessary
+ * altosui/telegps/micropeak: Handle both MULTI_LIB and non-MULTI_LIB builds
+ * altoslib: Store common frequencies in library version-independent form
+ * altoslib: Store saved state in version-independent format
+ * altoslib: Allow empty values in AltosHashSet representation
+ * altoslib: Set version and log space from AltosIdleFetch
+ * altoslib: Add log_space to AltosState
+ * altoslib: Add AltosIdleReader
+ * telegps: Use log_space when flight_log_max is missing
+ * telegps: Add monitor idle mode
+ * altoslib: use miles for distances > 1000ft.
+ * altosuilib: Have map preload respond to units and font size changes
+ * altosuilib: Rename AltosUIMap*New.java to AltosUIMap*.java
+ * doc: pad/idle indicator table was busted
+ * altosuilib: Fill preload map on site or lat/lon change
+ * altosuilib: Only display map debugging when serial_debug is enabled
+ * telegps-v1.0: Document how SN 1959 was fixed
+ * stmf0: Clear all USB state when resetting chip. Wakeup all sleepers
+ * stmf0: Do not send more data than requested for GET_DESCRIPTOR
+ * altos/lpc: Handle USB reset by resetting internal state
+ * altos/stm: Handle USB reset in STM32L usb driver
+ * altos/cc1115l: Reduce trace buffer size
+ * altos/stmf0: Rework the sram allocation to save a few text bytes
+ * altos/stmf0: Remove ao_usb_free
+ * altosdroid: Auto save freq changes on 'ok'
+ * altosui: Remove missing items from --summary output
+ * altosuilib: Track open frames, exit when none remain
+ * altosui: Don't open command window when --graph is provided
+ * doc: Updates to 1.6.4 release notes.
+ * altoslib: Switch preserved state format to JSON
+ * altoslib: Remove AltosHashSet code
+ * altoslib: Add null constructors to AltosQuaternion and AltosRotation
+ * altoslib: Add JSON-based object saving/restoring code
+ * altoslib: Use reflection JSON code for frequency preferences
+ * altoslib: Improve AltosState save/restore debugging
+ * altoslib: Get rid of manual JSON encoding stuff
+ * altoslib: Add null constructor for AltosCompanion
+ * altoslib: Add construction for remaining primitive array types to JSON
+ * altoslib: Add back some JSON exception debugging printfs
+ * altosui: Print filename before attempting to parse in --summary mode
+ * altoslib: Stop reflective JSON class walk at Object instead of null
+ * Bump version to 1.6.4
+
+ [ Bdale Garbee ]
+ * process updates made during 1.6.3 release cycle
+ * extend "ok" temp range to 40C, since battery charger on bench can drive temp above 35C at times in Bdale and Robert's production testing
+ * releasing 1.6.4
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 17 Jun 2016 10:02:32 -0600
+
+altos (1.6.3-1) unstable; urgency=medium
+
+ [ Keith Packard ]
+ * Releasing: Copy TeleMega v2.0 bits to Binaries
+ * src/chaoskey-v0.1: Add HV enable support
+ * altos/chaoskey: Add support for flipping between raw and cooked bits
+ * altos/chaoskey: Delay ADC reading for 250ms at startup
+ * altos: remove blank line in stmf0/ao_timer.c
+ * altos/stmf0: Allow projects to specify non-default stack size
+ * altos: Add power management APIs
+ * altos/stmf0: Add suspend/resume support
+ * altos: Allow USB drivers to skip CDC-ACM -specific descriptors
+ * altos: Add power management to TRNG driver
+ * altos/chaoskey-v0.1: Add power management and change USB classes
+ * altos: Delay TRNG ADC long enough for HV supply to stabilize
+ * altos: Add simple stats test to TRNG code
+ * altos/stmf0: Add missing ao_gpio.c
+ * altos: Another fix for non CDC-ACM devices
+ * altos/stmf0: Fix location of device_id register
+ * altos/chaoskey: Encode both hardware and software versions in product ID
+ * altos/stmf0: Use device ID as usb serial number if requested
+ * altos/chaoskey: Use SoC device ID as serial number
+ * altos/chaoskey: Add another USB endpoint to read raw data
+ * altos: Add ChaosKey v1.0 product
+ * ao-bringup: Switch to v1.0 for chaoskey
+ * ao-tools: Add ao-chaosread
+ * altos/stmf0: Fix build without second USB IN endpoint
+ * libaltos: jni_md.h moved to linux subdir in Java install
+ * libaltos: Add unistd.h to get defines for various syscalls
+ * altos: Expose fast timer API from kernel/
+ * Change how we detect and install java
+ * ao-tools/ao-dump-up: Remove spurious flight state strings
+ * ao-tools/lib: Remove trailing whitespace from ao-elf.c
+ * ao-tools/lib: Add ao_hex_image_cat function
+ * ao-tools: Add ao-makebin
+ * altos/stmf0: Construct .bin files for flash loaders
+ * ao-bringup: Use dfu-util to install flash loader on chaoskey
+ * libaltos: Add Windows BT support. Split into separate source files.
+ * altosui: Delay between polling for igniter status in Fire Igniters
+ * altosuilib: Note that Windows now supports Bluetooth
+ * libaltos: Fix warning in linux libaltos code
+ * altoslib: use env var LAUNCH_SITES to override default URL
+ * altosuilib: Control map debugging output with Serial.debug
+ * altosui,telegps: Do not allow radio calibration to be edited
+ * altos/stm: Run scheduler code on interrupt stack
+ * altos/stm: Validate current task SP in interrupt by looking at PSP
+ * altos/stm: Allow apps to define different stack size
+ * altos/lpc: Add fast timer
+ * altos: Add one-byte SPI output routine for LPC and STM cores
+ * altos: Allow for flight hardware without any ADC values
+ * altos: Add Detherm log format (easymini without ADC)
+ * altos: Use mini logging for detherm, just without ADC
+ * altos/stmf0: Add SPI driver.
+ * altos/stmf0: Support HPE clock source
+ * doc: Note that EasyMega and TeleMega report A-D continuity
+ * altos: Add detherm product
+ * altos/stmf0: Add pwm and exti drivers
+ * altos: Add ao_gpi_set/clr_bits functions
+ * altos: Add easy mini plotting helper in test code
+ * altos/detherm: Add ms5607 to detherm
+ * altos/detherm: Add servo driver
+ * altos: Support telefire products in cc1200 driver
+ * altos: Add pad support for new telefire versions
+ * altos: telefiretwo-v0.1 bits
+ * altos: Allow for pad boxes with different sensor configurations
+ * altos: Support pad/lco boxes with fixed box numbers
+ * altos: Add TeleLCOTwo firmware
+ * altos: Fix telefiretwo .gitignore
+ * altos: Add ao_lco_two.c; alternate LCO interface code
+ * altos: Use simpler debounce logic for buttons
+ * altos/telelcotwo: Add idle timeout
+ * Add TeleFireTwo v0.2 project
+ * altos/stmf0: Fix external interrupts
+ * altos/telefiretwo-v0.2: Change alarm names in comment
+ * altosdroid: Don't set target location if lat/lon is MISSING
+ * altoslib: Add debugging to AltosPreferences.state() etc
+ * altoslib: Make AltosGPSSat implement Serializable
+ * altoslib: switch from keySet() to keys() in altos map tiles
+ * altos: avoid mixed declarations and code in ao_task.c
+ * Update java library version numbers
+ * AltosDroid play store keys have moved, update configure.ac
+ * Prepare for new Android release by updating version number
+ * libaltos: Fix for Mac OS X El Capitan
+ * Add preliminary 1.6.3 release notes
+ * altosdroid: Can only use message once
+ * Bump version to 1.6.3
+ * altosdroid: Track device location in app, not telemetry service
+ * altosdroid: Redraw offline map when my location changes
+ * altosdroid: Run even without Bluetooth
+ * altoslib: Use feet per second for imperial speed
+ * altoslib: Report exceptions caught while opening launch sites URL
+ * altoslib: Don't try to drag lines around until map is loaded
+ * Debug bits for telebt
+ * altos: Use TXE instead of TC for serial on STM32l
+ * altos/stm32l: Add support for software-driven HW flow control
+ * altos/telebt-v3.0: Flip CTS/RTS pins for BT module
+ * altos: Clear packet queue when starting packet master
+ * altosdroid: Add idle mode monitoring, reboot. Start igniters
+ * altosdroid: Split setup functions to separate dialog
+ * Fix key in AndroidManifest.xml.in
+ * altosdroid: Add configurable frequency set
+ * altoslib: Make AltosPreferencesBackend abstract. Add set/put Serializable
+ * doc: Add idle mode info to 1.6.3 release note
+ * Revert "altos/stm: Run scheduler code on interrupt stack"
+ * altosdroid: max height is a height, not a speed
+ * altoslib: Correct stats for flights without a real landing
+ * altoslib: Flush during set_state. Don't store listener state.
+ * publish AltosDroid in keithp-fat target
+ * altoslib: Deal with TeleMetrum v2.0 MMA6555 being inverted
+ * altos: Make sure AO_MMA655X_INVERT is declared where needed
+ * doc: Update AltosDroid chapter for 1.6.3
+ * doc: 1.6.3 release notes note TeleBT rts/cts and TM 2.0 monitor idle fixes
+ * micropeak: Change order of windows install so that java detect works
+ * altoslib: Fix map preloading callbacks, run in separate thread
+ * windows: Change install to look for browser in a different place
+ * Ignore some built files for 1.6.3
+
+ [ Robert Garbee ]
+ * fix argument to ao-cal-freq so devices other than /dev/ttyACM0 work
+
+ [ Bart Massey ]
+ * Clean up stmf0 adc init.
+ * altos: Fixed timing of panic display LED to be readable
+
+ [ Justin Vreeland ]
+ * Fix java class differing only by case
+
+ [ Bdale Garbee ]
+ * add beep to TeleMega turnon script
+ * releasing 1.6.3
+
+ -- Bdale Garbee <bdale@gag.com> Fri, 06 May 2016 18:14:11 -0600
+
altos (1.6.2-1) unstable; urgency=medium
[ Bdale Garbee ]
projects / fw / altos / blobdiff