altos: Switch ao_rssi.c __xdata to __pdata

[fw/altos] / ao-tools / ao-load / ao-load.1

diff --git a/ao-tools/ao-load/ao-load.1 b/ao-tools/ao-load/ao-load.1
index 10484f3bc4eb47d6d30aa1c455e3e35a445590e5..79b76a79bf868a2ba69150b1568cc1c998071d8d 100644 (file)
--- a/ao-tools/ao-load/ao-load.1
+++ b/ao-tools/ao-load/ao-load.1
@@ -21,13 +21,48 @@
 ao-load \- flash a program to a AltOS device
 .SH SYNOPSIS
 .B "ao-load"
-[\-tty \fItty-device\fP]
+[\-T \fItty-device\fP]
+[\--tty \fItty-device\fP]
+[\-D \fIaltos-device\fP]
+[\--device \fIaltos-device\fP]
+[\--cal \fIradio-calibration\fP]
 \fIfile.ihx\fP
 \fIdevice serial number\fP
 .SH DESCRIPTION
 .I ao-load
 loads the specified .ihx file into the target device flash memory,
 customizing the AltOS image with the specified serial number.
+.SH OPTIONS
+.TP
+\-T tty-device | --tty tty-device
+This selects which tty device the debugger uses to communicate with
+the target device. The special name 'BITBANG' directs ao-dbg to use
+the cp2103 connection, otherwise this should be a usb serial port
+connected to a suitable cc1111 debug node.
+.TP
+\-D AltOS-device | --device AltOS-device
+Search for a connected device. This requires an argument of one of the
+following forms:
+.IP
+TeleMetrum:2
+.br
+TeleMetrum
+.br
+2
+.IP
+Leaving out the product name will cause the tool to select a suitable
+product, leaving out the serial number will cause the tool to match
+one of the available devices.
+.TP
+\-c radio-calibration | --cal radio-calibration
+This programs the radio calibration value into the image for hardware
+which doesn't have any eeprom storage for this value. The value here
+can be computed given the current radio calibration value, the
+measured frequency and the desired frequency:
+.IP
+       cal' = cal * (desired/measured)
+.IP
+The default calibration value is 1186611.
 .SH USAGE
 .I ao-load
 reads the specified .ihx file into memory, locates the matching .map