doc: add flash-force instructions for TeleBT v3.0

[fw/altos] / ao-tools / ao-chaosread / ao-chaosread.1

diff --git a/ao-tools/ao-chaosread/ao-chaosread.1 b/ao-tools/ao-chaosread/ao-chaosread.1
index d8ed6cb345890f6b9249eac9e818d247f20457dc..94ca5ce9e0fc06d543415dc3b75aadb220325daf 100644 (file)
--- a/ao-tools/ao-chaosread/ao-chaosread.1
+++ b/ao-tools/ao-chaosread/ao-chaosread.1
@@ -29,6 +29,30 @@ reads ADC values from the noise source on the attached ChaosKey device.
 \-s serial | --serial serial
 This selects a ChaosKey by serial number instead of using the first
 one found.
+.TP
+\-l length | --length length
+Set the amount of data to read. Suffixes 'k', 'M' and 'G' are
+supported. The default is 1k.
+.TP
+\-i | --infinite
+Read an unlimited amount of data.
+.TP
+\-b | --bytes
+For each 16-bit value read, output bits 1-8 as a byte, don't output
+bit 0 or bits 9-15 at all.
+.TP
+\-c | --cooked
+Read whitened data from the device. The default is to read raw data
+from the noise source.
+.TP
+\-r | --raw
+Read raw data from the noise source. This is the default.
+.TP
+\-f | --flash
+Read the contents of flash memory on the device. This loops through
+flash memory, so you can read the contents more than once, but there's
+no way to reset the pointer back to the start other than making sure
+you read the whole contents.
 .SH USAGE
 .I ao-chaosread
 reads noise data.