ao-bringup/turnon_telemini: Detect which programmer to use by $USER

[fw/altos] / ao-bringup / turnon_telemini

diff --git a/ao-bringup/turnon_telemini b/ao-bringup/turnon_telemini
index 4450d6f6e57b2af10cfa5faded166cc2eac44310..6aef7f51b3635d741a269fa164c20e3024ea1509 100755 (executable)
--- a/ao-bringup/turnon_telemini
+++ b/ao-bringup/turnon_telemini
@@ -18,11 +18,13 @@ else
        exit 1
 fi
 
-echo "TeleMini v1.0 Turn-On and Calibration Program"
+VERSION=1.0
+
+echo "TeleMini v$VERSION Turn-On and Calibration Program"
 echo "Copyright 2011 by Bdale Garbee.  Released under GPL v2"
 echo
 echo "Expectations:"
-echo "\tTeleMini v1.0 powered from LiPo"
+echo "\tTeleMini v$VERSION powered from LiPo"
 echo "\t\twith TeleDongle (on /dev/ttyACM0) cabled to debug header"
 echo "\t\twith frequency counter able to sample RF output"
 echo
@@ -31,18 +33,27 @@ read SERIAL
 
 echo $RAWLOAD
 
-$RAWLOAD -D 100 -r ao_led_blink.ihx
+case $USER in
+    bdale)
+       programmer=100
+       ;;
+    keithp)
+       programmer=186
+       ;;
+esac
+
+$RAWLOAD -D $programmer -r ao_led_blink.ihx
 echo "LEDs should be blinking"
 sleep 5
 
-$RAWLOAD -D 100 -r ao_radio_xmit.ihx
+$RAWLOAD -D $programmer -r ao_radio_xmit.ihx
 echo -n "Generating RF carrier.  Please enter measured frequency: "
 read FREQ
 
 CAL_VALUE=`nickle -e "floor(434.55 / $FREQ * 1186611 + 0.5)"`
 
 echo "Programming flash with cal value " $CAL_VALUE
-$AOLOAD -D 100 --cal $CAL_VALUE /usr/share/altos/stable/telemini-v1.0*.ihx $SERIAL
+$AOLOAD -D $programmer --cal $CAL_VALUE ~/altusmetrumllc/Binaries/telemini-v$VERSION-*.ihx $SERIAL
 
 echo "Serial number "$SERIAL" programmed with RF cal value "$CAL_VALUE
 echo "Unplug and replug USB, cu to the board, confirm freq and record power"