+commit d16e60858427bf7dbe83a858728ebf097a09207a
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Sep 13 11:29:19 2014 -0600
+
+ ignore cal_values file in bringup directory
+
+commit 40885ae5e6be66faf08cdb9b481d1d998856ca4b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Sat Sep 13 11:28:19 2014 -0600
+
+ need multi-arch in fat build
+
+commit e969172a81e24f70c349b10f429e69817900c307
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Sep 11 19:56:13 2014 -0700
+
+ altos: Make sure we don't beep out continuity twice in idle mode
+
+ If the battery voltage report takes longer than the initialiation
+ sequence, we could get to the state reporting after the state had
+ switched from startup to idle. This would result in continuity being
+ reported the first time through the loop. Then, as the state had
+ already changed, we'd pass through the while test and go back to
+ report continuity a second time.
+
+ Fixed by using the state remembered before beeping out the voltage to
+ decide whether to report the continuity.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 800f3377b1a374ad5cf826aa897efdcb08059040
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Sep 11 15:00:25 2014 -0700
+
+ altos: Fix ability to disable telemetry by setting interval to 0
+
+ For non-zero telemetry intervals, the radio code limits the value
+ based on the data rate. However, a zero interval means that telemetry
+ should be entirely disabled, so that value should be left alone when
+ checking.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 793588e218102204e69755a16bc32ea5c67f29c7
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Sep 11 14:23:29 2014 -0700
+
+ telegps: Was mis-configuring the 'Configure Device' dialog
+
+ Make sure we show 'rate_label' instead of showing 'radio_enable_label'
+ twice.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 19730b872c61f34724b0f187f71cccb6a65251dd
+Author: Keith Packard <keithp@keithp.com>
+Date: Thu Sep 11 14:14:07 2014 -0700
+
+ altoslib: Stop re-loading previous flight when starting telemetry monitoring
+
+ This feature is necessary on AltosDroid because there's no other UI
+ for reloading an old flight. It's not useful on the desktop where you
+ really just want to see new telemetry; old telemetry is availbale
+ through the 'graph flight' or 'replay' mechanisms.
+
+ AltosDroid uses a different class for reading telemetry data, so we
+ can just remove this feature from altoslib at this point.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 10e31d84ee5cdf10248988079df91354ae6ed612
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 01:33:33 2014 -0600
+
+ update changelog for release
+
+commit 05e4094411f861bf29bea2e9c39c1b66f8f267f8
+Merge: acb2791 2ee937b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 01:32:27 2014 -0600
+
+ Merge branch 'master' into branch-1.5
+
+commit 2ee937b603b181bb24768eb4d0e2f918a5377fd3
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 01:29:56 2014 -0600
+
+ use dh_installmime, which requires telling configure to stay out of the way
+
+commit 22e68da2cb3b0b42708876f1dde52dbfd0ce4bf7
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 00:26:10 2014 -0600
+
+ another build dep
+
+commit 615b69b19557a9683eeb0475b30a053a35ca51ac
+Merge: a72b768 0365493
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 01:30:37 2014 -0600
+
+ Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
+
+commit 036549343416183f973d00a86d897d4a368c1d6f
+Author: Keith Packard <keithp@keithp.com>
+Date: Wed Sep 10 00:03:53 2014 -0700
+
+ configure: Add --disable-install-shared-mime-info option
+
+ This inhibits the installation of the shared mime info data file and
+ updating of the shared mime database. Necessary if you want to use a
+ distribution-specific shared mime installation hook, like dh_installmime
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit 1992a1e3046a5414ce8d394e1cd8e5e6f6338d29
+Author: Keith Packard <keithp@keithp.com>
+Date: Tue Sep 9 23:43:10 2014 -0700
+
+ .desktop: Use %F instead of %f in .desktop files
+
+ %F is a list of files, %f is a single file. All of our tools can
+ handle lists of files, so make the .desktop file reflect that.
+
+ Signed-off-by: Keith Packard <keithp@keithp.com>
+
+commit acb279125c0fa377c8b1dbbb8634fba60f7f845b
+Author: Bdale Garbee <bdale@gag.com>
+Date: Wed Sep 10 00:05:07 2014 -0600
+
+ update ChangeLog
+
commit 5de00e9e39cff2d3b409c2ce99caa994f0a36202
Merge: b3fba98 a72b768
Author: Bdale Garbee <bdale@gag.com>
projects / fw / altos / blobdiff