Imported Upstream version 1.8.3p2

[debian/sudo] / NEWS

What's new in Sudo 1.8.3p2?

 * Fixed a format string vulnerability when the sudo binary (or a
   symbolic link to the sudo binary) contains printf format escapes
   and the -D (debugging) flag is used.

What's new in Sudo 1.8.3p1?

 * Fixed a crash in the monitor process on Solaris when NOPASSWD
   was specified or when authentication was disabled.
 
 * Fixed matching of a Runas_Alias in the group section of a
   Runas_Spec.

What's new in Sudo 1.8.3?

 * Fixed expansion of strftime() escape sequences in the "log_dir"
   sudoers setting.

 * Esperanto, Italian and Japanese translations from translationproject.org.

 * Sudo will now use PAM by default on AIX 6 and higher.

 * Added --enable-werror configure option for gcc's -Werror flag.

 * Visudo no longer assumes all editors support the +linenumber
   command line argument.  It now uses a whitelist of editors known
   to support the option.

 * Fixed matching of network addresses when a netmask is specified
   but the address is not the first one in the CIDR block.

 * The configure script now check whether or not errno.h declares
   the errno variable.  Previously, sudo would always declare errno
   itself for older systems that don't declare it in errno.h.

 * The NOPASSWD tag is now honored for denied commands too, which
   matches historic sudo behavior (prior to sudo 1.7.0).

 * Sudo now honors the "DEREF" setting in ldap.conf which controls
   how alias dereferencing is done during an LDAP search.

 * A symbol conflict with the pam_ssh_agent_auth PAM module that
   would cause a crash been resolved.

 * The inability to load a group provider plugin is no longer
   a fatal error.

 * A potential crash in the utmp handling code has been fixed.

 * Two PAM session issues have been resolved.  In previous versions
   of sudo, the PAM session was opened as one user and closed as
   another.  Additionally, if no authentication was performed, the
   PAM session would never be closed.

 * Sudo will now work correctly with LDAP-based sudoers using TLS
   or SSL on Debian systems.

 * The LOGNAME, USER and USERNAME environment variables are preserved
   correctly again in sudoedit mode.

What's new in Sudo 1.8.2?

 * Sudo, visudo, sudoreplay and the sudoers plug-in now have natural
   language support (NLS). This can be disabled by passing configure
   the --disable-nls option.  Sudo will use gettext(), if available,
   to display translated messages.  All translations are coordinated
   via The Translation Project, http://translationproject.org/.

 * Plug-ins are now loaded with the RTLD_GLOBAL flag instead of
   RTLD_LOCAL.  This fixes missing symbol problems in PAM modules
   on certain platforms, such as FreeBSD and SuSE Linux Enterprise.

 * I/O logging is now supported for commands run in background mode
   (using sudo's -b flag).

 * Group ownership of the sudoers file is now only enforced when
   the file mode on sudoers allows group readability or writability.

 * Visudo now checks the contents of an alias and warns about cycles
   when the alias is expanded.

 * If the user specifes a group via sudo's -g option that matches
   the target user's group in the password database, it is now
   allowed even if no groups are present in the Runas_Spec.

 * The sudo Makefiles now have more complete dependencies which are
   automatically generated instead of being maintained manually.

 * The "use_pty" sudoers option is now correctly passed back to the
   sudo front end.  This was missing in previous versions of sudo
   1.8 which prevented "use_pty" from being honored.

 * "sudo -i command" now works correctly with the bash version
   2.0 and higher.  Previously, the .bash_profile would not be
   sourced prior to running the command unless bash was built with
   NON_INTERACTIVE_LOGIN_SHELLS defined.

 * When matching groups in the sudoers file, sudo will now match
   based on the name of the group instead of the group ID. This can
   substantially reduce the number of group lookups for sudoers
   files that contain a large number of groups.

 * Multi-factor authentication is now supported on AIX.

 * Added support for non-RFC 4517 compliant LDAP servers that require
   that seconds be present in a timestamp, such as Tivoli Directory Server.

 * If the group vector is to be preserved, the PATH search for the
   command is now done with the user's original group vector.

 * For LDAP-based sudoers, the "runas_default" sudoOption now works
   properly in a sudoRole that contains a sudoCommand.

 * Spaces in command line arguments for "sudo -s" and "sudo -i" are
   now escaped with a backslash when checking the security policy.

What's new in Sudo 1.8.1p2?

 * Two-character CIDR-style IPv4 netmasks are now matched correctly
   in the sudoers file.

 * A build error with MIT Kerberos V has been resolved.

 * A crash on HP-UX in the sudoers plugin when wildcards are
   present in the sudoers file has been resolved.

 * Sudo now works correctly on Tru64 Unix again.

What's new in Sudo 1.8.1p1?

 * Fixed a problem on AIX where sudo was unable to set the final
   uid if the PAM module modified the effective uid.

 * A non-existent includedir is now treated the same as an empty
   directory and not reported as an error.

 * Removed extraneous parens in LDAP filter when sudoers_search_filter
   is enabled that can cause an LDAP search error.

 * Fixed a "make -j" problem for "make install".

What's new in Sudo 1.8.1?

 * A new LDAP setting, sudoers_search_filter, has been added to
   ldap.conf.  This setting can be used to restrict the set of
   records returned by the LDAP query.  Based on changes from Matthew
   Thomas.

 * White space is now permitted within a User_List when used in
   conjunction with a per-user Defaults definition.

 * A group ID (%#gid) may now be specified in a User_List or Runas_List.
   Likewise, for non-Unix groups the syntax is %:#gid.

 * Support for double-quoted words in the sudoers file has been fixed.
   The change in 1.7.5 for escaping the double quote character
   caused the double quoting to only be available at the beginning
   of an entry.

 * The fix for resuming a suspended shell in 1.7.5 caused problems
   with resuming non-shells on Linux.  Sudo will now save the process
   group ID of the program it is running on suspend and restore it
   when resuming, which fixes both problems.

 * A bug that could result in corrupted output in "sudo -l" has been
   fixed.

 * Sudo will now create an entry in the utmp (or utmpx) file when
   allocating a pseudo-tty (e.g. when logging I/O).  The "set_utmp"
   and "utmp_runas" sudoers file options can be used to control this.
   Other policy plugins may use the "set_utmp" and "utmp_user"
   entries in the command_info list.

 * The sudoers policy now stores the TSID field in the logs
   even when the "iolog_file" sudoers option is defined to a value
   other than %{sessid}.  Previously, the TSID field was only
   included in the log file when the "iolog_file" option was set
   to its default value.

 * The sudoreplay utility now supports arbitrary session IDs.
   Previously, it would only work with the base-36 session IDs
   that the sudoers plugin uses by default.

 * Sudo now passes "run_shell=true" to the policy plugin in the
   settings list when sudo's -s command line option is specified.
   The sudoers policy plugin uses this to implement the "set_home"
   sudoers option which was missing from sudo 1.8.0.

 * The "noexec" functionality has been moved out of the sudoers
   policy plugin and into the sudo front-end, which matches the
   behavior documented in the plugin writer's guide.  As a result,
   the path to the noexec file is now specified in the sudo.conf
   file instead of the sudoers file.

 * On Solaris 10, the PRIV_PROC_EXEC privilege is now used to
   implement the "noexec" feature.  Previously, this was implemented
   via the LD_PRELOAD environment variable.

 * The exit values for "sudo -l", "sudo -v" and "sudo -l command"
   have been fixed in the sudoers policy plugin.

 * The sudoers policy plugin now passes the login class, if any,
   back to the sudo front-end.

 * The sudoers policy plugin was not being linked with requisite
   libraries in certain configurations.

 * Sudo now parses command line arguments before loading any plugins.
   This allows "sudo -V" or "sudo -h" to work even if there is a problem
   with sudo.conf

 * Plugins are now linked with the static version of libgcc to allow
   the plugin to run on a system where no shared libgcc is installed,
   or where it is installed in a different location.

What's new in Sudo 1.8.0?

 * Sudo has been refactored to use a modular framework that can
   support third-party policy and I/O logging plugins.  The default
   plugin is "sudoers" which provides the traditional sudo functionality.
   See the sudo_plugin manual for details on the plugin API and the
   sample in the plugins directory for a simple example.

What's new in Sudo 1.7.5?

 * When using visudo in check mode, a file named "-" may be used to
   check sudoers data on the standard input.

 * Sudo now only fetches shadow password entries when using the
   password database directly for authentication.

 * Password and group entries are now cached using the same key
   that was used to look them up.  This fixes a problem when looking
   up entries by name if the name in the retrieved entry does not
   match the name used to look it up.  This may happen on some systems
   that do case insensitive lookups or that truncate long names.

 * GCC will no longer display warnings on glibc systems that use
   the warn_unused_result attribute for write(2) and other system calls.

 * If a PAM account management module denies access, sudo now prints
   a more useful error message and stops trying to validate the user.

 * Fixed a potential hang on idle systems when the sudo-run process
   exits immediately.

 * Sudo now includes a copy of zlib that will be used on systems
   that do not have zlib installed.

 * The --with-umask-override configure flag has been added to enable
   the "umask_override" sudoers Defaults option at build time.

 * Sudo now unblocks all signals on startup to avoid problems caused
   by the parent process changing the default signal mask.

 * LDAP Sudoers entries may now specify a time period for which
   the entry is valid.  This requires an updated sudoers schema
   that includes the sudoNotBefore and sudoNotAfter attributes.
   Support for timed entries must be explicitly enabled in the
   ldap.conf file.  Based on changes from Andreas Mueller.

 * LDAP Sudoers entries may now specify a sudoOrder attribute that
   determines the order in which matching entries are applied.  The
   last matching entry is used, just like file-based sudoers.  This
   requires an updated sudoers schema that includes the sudoOrder
   attribute.  Based on changes from Andreas Mueller.

 * When run as sudoedit, or when given the -e flag, sudo now treats
   command line arguments as pathnames.  This means that slashes
   in the sudoers file entry must explicitly match slashes in
   the command line arguments.  As a result, and entry such as:
        user ALL = sudoedit /etc/*
   will allow editing of /etc/motd but not /etc/security/default.

 * NETWORK_TIMEOUT is now an alias for BIND_TIMELIMIT in ldap.conf for
   compatibility with OpenLDAP configuration files.

 * The LDAP API TIMEOUT parameter is now honored in ldap.conf.

 * The I/O log directory may now be specified in the sudoers file.

 * Sudo will no longer refuse to run if the sudoers file is writable
   by root.

 * Sudo now performs command line escaping for "sudo -s" and "sudo -i"
   after validating the command so the sudoers entries do not need
   to include the backslashes.

 * Logging and email sending are now done in the locale specified
   by the "sudoers_locale" setting ("C" by default).  Email send by
   sudo now includes MIME headers when "sudoers_locale" is not "C".

 * The configure script has a new option, --disable-env-reset, to
   allow one to change the default for the sudoers Default setting
   "env_reset" at compile time.

 * When logging "sudo -l command", sudo will now prepend "list "
   to the command in the log line to distinguish between an
   actual command invocation in the logs.

 * Double-quoted group and user names may now include escaped double
   quotes as part of the name.  Previously this was a parse error.

 * Sudo once again restores the state of the signal handlers it
   modifies before executing the command.  This allows sudo to be
   used with the nohup command.

 * Resuming a suspended shell now works properly when I/O logging
   is not enabled (the I/O logging case was already correct).

What's new in Sudo 1.7.4p6?

 * A bug has been fixed in the I/O logging support that could cause
   visual artifacts in full-screen programs such as text editors.

What's new in Sudo 1.7.4p5?

 * A bug has been fixed that would allow a command to be run without the
   user entering a password when sudo's -g flag is used without the -u flag.

 * If user has no supplementary groups, sudo will now fall back on checking
   the group file explicitly, which restores historic sudo behavior.

 * A crash has been fixed when sudo's -g flag is used without the -u flag
   and the sudoers file contains an entry with no runas user or group listed.

 * A crash has been fixed when the Solaris project support is enabled
   and sudo's -g flag is used without the -u flag.

 * Sudo no longer exits with an error when support for auditing is
   compiled in but auditing is not enabled.

 * Fixed a bug introduced in sudo 1.7.3 where the ticket file was not
   being honored when the "targetpw" sudoers Defaults option was enabled.

 * The LOG_INPUT and LOG_OUTPUT tags in sudoers are now parsed correctly.

 * A crash has been fixed in "sudo -l" when sudo is built with auditing
   support and the user is not allowed to run any commands on the host.

What's new in Sudo 1.7.4p4?

 * A potential security issue has been fixed with respect to the handling
   of sudo's -g command line option when -u is also specified.  The flaw
   may allow an attacker to run commands as a user that is not authorized
   by the sudoers file.

 * A bug has been fixed where "sudo -l" output was incomplete if multiple
   sudoers sources were defined in nsswitch.conf and there was an error
   querying one of the sources.

 * The log_input, log_output, and use_pty sudoers options now work correctly
   on AIX.  Previously, sudo would hang if they were enabled.

 * The "make install" target now works correctly when sudo is built in a
   directory other than the source directory.

 * The "runas_default" sudoers setting now works properly in a per-command
   Defaults line.

 * Suspending and resuming the bash shell when PAM is in use now works
   correctly.  The SIGCONT signal was not propagated to the child process.

What's new in Sudo 1.7.4p3?

 * A bug has been fixed where duplicate HOME environment variables could be
   present when the env_reset setting was disabled and the always_set_home
   setting was enabled in sudoers.

 * The value of sysconfdir is now substituted into the path to the sudoers.d
   directory in the installed sudoers file.

 * Compilation problems on IRIX and other platforms have been fixed.

 * If multiple PAM "auth" actions are specified and the user enters ^C at
   the password prompt, sudo will no longer prompt for a password for any
   subsequent "auth" actions.  Previously it was necessary to enter ^C for
   each "auth" action.

What's new in Sudo 1.7.4p2?

 * A bug where sudo could spin in a busy loop waiting for the child process
   has been fixed.

What's new in Sudo 1.7.4p1?

 * A bug introduced in sudo 1.7.3 that prevented the -k and -K options from
   functioning when the tty_tickets sudoers option is enabled has been fixed.

 * Sudo no longer prints a warning when the -k or -K options are specified
   and the ticket file does not exist.

 * It is now easier to cross-compile sudo.

What's new in Sudo 1.7.4?

 * Sudoedit will now preserve the file extension in the name of the
   temporary file being edited.  The extension is used by some
   editors (such as emacs) to choose the editing mode.

 * Time stamp files have moved from /var/run/sudo to either /var/db/sudo,
   /var/lib/sudo or /var/adm/sudo.  The directories are checked for
   existence in that order.  This prevents users from receiving the
   sudo lecture every time the system reboots.  Time stamp files older
   than the boot time are ignored on systems where it is possible to
   determine this.

 * The tty_tickets sudoers option is now enabled by default.

 * Ancillary documentation (README files, LICENSE, etc) is now installed
   in a sudo documentation directory.

 * Sudo now recognizes "tls_cacert" as an alias for "tls_cacertfile"
   in ldap.conf.

 * Defaults settings that are tied to a user, host or command may
   now include the negation operator.  For example:
        Defaults:!millert lecture
   will match any user but millert.

 * The default PATH environment variable, used when no PATH variable
    exists, now includes /usr/sbin and /sbin.

 * Sudo now uses polypkg (http://rc.quest.com/topics/polypkg/)
   for cross-platform packing.

 * On Linux, sudo will now restore the nproc resource limit before
   executing a command, unless the limit appears to have been modified
   by pam_limits.  This avoids a problem with bash scripts that open
   more than 32 descriptors on SuSE Linux, where sysconf(_SC_CHILD_MAX)
   will return -1 when RLIMIT_NPROC is set to RLIMIT_UNLIMITED (-1).

 * The HOME and MAIL environment variables are now reset based on the
   target user's password database entry when the env_reset sudoers option
   is enabled (which is the case in the default configuration).  Users
   wishing to preserve the original values should use a sudoers entry like:
        Defaults env_keep += HOME
   to preserve the old value of HOME and
        Defaults env_keep += MAIL
   to preserve the old value of MAIL.

 * Fixed a problem in the restoration of the AIX authdb registry setting.

 * Sudo will now fork(2) and wait until the command has completed before
   calling pam_close_session().

 * The default syslog facility is now "authpriv" if the operating system
   supports it, else "auth".

What's new in Sudo 1.7.3?

 * Support for logging I/O for the command being run.
   For more information, see the documentation for the "log_input"
   and "log_output" Defaults options in the sudoers manual.  Also
   see the sudoreplay manual for how to replay I/O log sessions.

 * The use_pty sudoers option can be used to force a command to be
   run in a pseudo-pty, even when I/O logging is not enabled.

 * On some systems, sudo can now detect when a user has logged out
   and back in again when tty-based time stamps are in use.  Supported
   systems include Solaris systems with the devices file system,
   Mac OS X, and Linux systems with the devpts filesystem (pseudo-ttys
   only).

 * On AIX systems, the registry setting in /etc/security/user is
   now taken into account when looking up users and groups.  Sudo
   now applies the correct the user and group ids when running a
   command as a user whose account details come from a different
   source (e.g. LDAP or DCE vs.  local files).

 * Support for multiple 'sudoers_base' and 'uri' entries in ldap.conf.
   When multiple entries are listed, sudo will try each one in the
   order in which they are specified.

 * Sudo's SELinux support should now function correctly when running
   commands as a non-root user and when one of stdin, stdout or stderr
   is not a terminal.

 * Sudo will now use the Linux audit system with configure with
   the --with-linux-audit flag.

 * Sudo now uses mbr_check_membership() on systems that support it
   to determine group membership.  Currently, only Darwin (Mac OS X)
   supports this.

 * When the tty_tickets sudoers option is enabled but there is no
   terminal device, sudo will no longer use or create a tty-based
   ticket file.  Previously, sudo would use a tty name of "unknown".
   As a consequence, if a user has no terminal device, sudo will
   now always prompt for a password.

 * The passwd_timeout and timestamp_timeout options may now be
   specified as floating point numbers for more granular timeout
   values.

 * Negating the fqdn option in sudoers now works correctly when sudo
   is configured with the --with-fqdn option.  In previous versions
   of sudo the fqdn was set before sudoers was parsed.

What's new in Sudo 1.7.2?

 * A new #includedir directive is available in sudoers.  This can be
   used to implement an /etc/sudo.d directory.  Files in an includedir
   are not edited by visudo unless they contain a syntax error.

 * The -g option did not work properly when only setting the group
   (and not the user).  Also, in -l mode the wrong user was displayed
   for sudoers entries where only the group was allowed to be set.

 * Fixed a problem with the alias checking in visudo which
   could prevent visudo from exiting.

 * Sudo will now correctly parse the shell-style /etc/environment
   file format used by pam_env on Linux.

 * When doing password and group database lookups, sudo will only
   cache an entry by name or by id, depending on how the entry was
   looked up.  Previously, sudo would cache by both name and id
   from a single lookup, but this breaks sites that have multiple
   password or group database names that map to the same uid or
   gid.

 * User and group names in sudoers may now be enclosed in double
   quotes to avoid having to escape special characters.

 * BSM audit fixes when changing to a non-root uid.

 * Experimental non-Unix group support.  Currently only works with
   Quest Authorization Services and allows Active Directory groups
   fixes for Minix-3.

 * For Netscape/Mozilla-derived LDAP SDKs the certificate and key
   paths may be specified as a directory or a file.  However, version
   5.0 of the SDK only appears to support using a directory (despite
   documentation to the contrary).  If SSL client initialization
   fails and the certificate or key paths look like they could be
   default file name, strip off the last path element and try again.

 * A setenv() compatibility fix for Linux systems, where a NULL
   value is treated the same as an empty string and the variable
   name is checked against the NULL pointer.

What's new in Sudo 1.7.1?

 * A new Defaults option "pwfeedback" will cause sudo to provide visual
   feedback when the user is entering a password.

 * A new Defaults option "fast_glob" will cause sudo to use the fnmatch()
   function for file name globbing instead of glob().  When this option
   is enabled, sudo will not check the file system when expanding wildcards.
   This is faster but a side effect is that relative paths with wildcard
   will no longer work.

 * New BSM audit support for systems that support it such as FreeBSD
   and Mac OS X.

 * The file name specified with the #include directive may now include
   a %h escape which is expanded to the short form of hostname.

 * The -k flag may now be specified along with a command, causing the
   user's timestamp file to be ignored.

 * New support for Tivoli-based LDAP START_TLS, present in AIX.

 * New support for /etc/netsvc.conf on AIX.

 * The unused alias checks in visudo now handle the case of an alias
   referring to another alias.

What's new in Sudo 1.7.0?

 * Rewritten parser that converts sudoers into a set of data structures.
   This eliminates a number of ordering issues and makes it possible to
   apply sudoers Defaults entries before searching for the command.
   It also adds support for per-command Defaults specifications.

 * Sudoers now supports a #include facility to allow the inclusion of other
   sudoers-format files.

 * Sudo's -l (list) flag has been enhanced:
    o applicable Defaults options are now listed
    o a command argument can be specified for testing whether a user
      may run a specific command.
    o a new -U flag can be used in conjunction with "sudo -l" to allow
      root (or a user with "sudo ALL") list another user's privileges.

 * A new -g flag has been added to allow the user to specify a
   primary group to run the command as.  The sudoers syntax has been
   extended to include a group section in the Runas specification.

 * A uid may now be used anywhere a username is valid.

 * The "secure_path" run-time Defaults option has been restored.

 * Password and group data is now cached for fast lookups.

 * The file descriptor at which sudo starts closing all open files is now
   configurable via sudoers and, optionally, the command line.

 * Visudo will now warn about aliases that are defined but not used.

 * The -i and -s command line flags now take an optional command
   to be run via the shell.  Previously, the argument was passed
   to the shell as a script to run.

 * Improved LDAP support.  SASL authentication may now be used in
   conjunction when connecting to an LDAP server.  The krb5_ccname
   parameter in ldap.conf may be used to enable Kerberos.

 * Support for /etc/nsswitch.conf.  LDAP users may now use nsswitch.conf
   to specify the sudoers order.  E.g.:
        sudoers: ldap files
   to check LDAP, then /etc/sudoers.  The default is "files", even
   when LDAP support is compiled in.  This differs from sudo 1.6
   where LDAP was always consulted first.

 * Support for /etc/environment on AIX and Linux.  If sudo is run
   with the -i flag, the contents of /etc/environment are used to
   populate the new environment that is passed to the command being
   run.

 * If no terminal is available or if the new -A flag is specified,
   sudo will use a helper program to read the password if one is
   configured.  Typically, this is a graphical password prompter
   such as ssh-askpass.

 * A new Defaults option, "mailfrom" that sets the value of the
   "From:" field in the warning/error mail.  If unspecified, the
   login name of the invoking user is used.

 * A new Defaults option, "env_file" that refers to a file containing
   environment variables to be set in the command being run.

 * A new flag, -n, may be used to indicate that sudo should not
   prompt the user for a password and, instead, exit with an error
   if authentication is required.

 * If sudo needs to prompt for a password and it is unable to disable
   echo (and no askpass program is defined), it will refuse to run
   unless the "visiblepw" Defaults option has been specified.

 * Prior to version 1.7.0, hitting enter/return at the Password: prompt
   would exit sudo.  In sudo 1.7.0 and beyond, this is treated as
   an empty password.  To exit sudo, the user must press ^C or ^D
   at the prompt.

 * visudo will now check the sudoers file owner and mode in -c (check)
   mode when the -s (strict) flag is specified.

 * A new Defaults option "umask_override" will cause sudo to set the
   umask specified in sudoers even if it is more permissive than the
   invoking user's umask.