git.gag.com Git - debian/amanda/blob - recover-src/Makefile.in

   1 # Makefile.in generated by automake 1.11 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # Makefile for Amanda file recovery programs.
  19
  20 # vim:ft=automake
  21 # Copyright (c) 2007,2008,2009 Zmanda, Inc.  All Rights Reserved.
  22 #
  23 # This program is free software; you can redistribute it and/or modify it
  24 # under the terms of the GNU General Public License version 2 as published
  25 # by the Free Software Foundation.
  26 #
  27 # This program is distributed in the hope that it will be useful, but
  28 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  29 # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  30 # for more details.
  31 #
  32 # You should have received a copy of the GNU General Public License along
  33 # with this program; if not, write to the Free Software Foundation, Inc.,
  34 # 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  35 #
  36 # Contact information: Zmanda Inc., 465 S. Mathilda Ave., Suite 300
  37 # Sunnyvale, CA 94085, USA, or: http://www.zmanda.com
  38
  39 # simple include file to pre-define variables which are then +='d by other
  40 # scripts in this directory.
  41
  42 # vim:ft=automake
  43 #
  44 # Adjust post-install permissions settings.  This rule works off two
  45 # specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
  46 # Each is a whitespace-separated list of commands, all of which are either
  47 # a variable assignment or a filename.  Three variables are available:
  48 #
  49 #  - dest= sets the destination directory to e.g., $(sbindir)
  50 #  - chown= controls changes in ownership; value is first argument to chown
  51 #  - chmod= controls changes in permissions; value is first argument to chmod
  52 #
  53 # As a special case, chown=amanda is taken as equivalent to
  54 # chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
  55 # whitespace in the user/group names.
  56 #
  57 # when a filename is seen, the currently active variables are applied.
  58 #
  59 # Note that scripts are data, not executables!
  60 #
  61 # EXAMPLE
  62 #
  63 # sbin_PROGRAMS = foo bar bing
  64 # libexec_PROGRAMS = pro gram
  65 # sbin_SCRIPTS = sk ript
  66 # INSTALLPERMS_exec = \
  67 #       dest=$(sbindir) chown=amanda chmod= \
  68 #               foo bar \
  69 #       chmod=07450 \
  70 #               bing
  71 #       dest=$(libexecdir) chmod= \
  72 #               $(libexec_PROGRAMS)
  73 # INSTALLPERMS_data = \
  74 #       dest=$(sbindir) chown=amanda chmod= \
  75 #               $(sbin_SCRIPTS)
  76 #
  77 # This whole operation is not required when making builds for packaging,
  78 # and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
  79 # AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
  80 # build directory is populated with a format suitable for shell interpretation,
  81 # with lines like this:
  82 #   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
  83 # the arguments being, respectively, owner:group, mode, and filename.  There will
  84 # be exactly one line for each file which has specific permissions.  The intention
  85 # is that this file be used by packaging scripts to set correct permissions at install
  86 # time.  Note that files which have no special permissions requirements do not appear
  87 # in this file at all, due to limitations of Automake.
  88
  89 # vim:ft=automake
  90
  91
  92 VPATH = @srcdir@
  93 pkgdatadir = $(datadir)/@PACKAGE@
  94 pkgincludedir = $(includedir)/@PACKAGE@
  95 pkglibdir = $(libdir)/@PACKAGE@
  96 pkglibexecdir = $(libexecdir)/@PACKAGE@
  97 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  98 install_sh_DATA = $(install_sh) -c -m 644
  99 install_sh_PROGRAM = $(install_sh) -c
 100 install_sh_SCRIPT = $(install_sh) -c
 101 INSTALL_HEADER = $(INSTALL_DATA)
 102 transform = $(program_transform_name)
 103 NORMAL_INSTALL = :
 104 PRE_INSTALL = :
 105 POST_INSTALL = :
 106 NORMAL_UNINSTALL = :
 107 PRE_UNINSTALL = :
 108 POST_UNINSTALL = :
 109 build_triplet = @build@
 110 host_triplet = @host@
 111 DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
 112         $(srcdir)/Makefile.in \
 113         $(top_srcdir)/config/automake/installperms.am \
 114         $(top_srcdir)/config/automake/precompile.am \
 115         $(top_srcdir)/config/automake/vars.am uparse.c uparse.h \
 116         uscan.c
 117 @WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
 118 sbin_PROGRAMS = amrecover$(EXEEXT)
 119 subdir = recover-src
 120 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 121 am__aclocal_m4_deps =  \
 122         $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
 123         $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
 124         $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
 125         $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
 126         $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
 127         $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
 128         $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
 129         $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
 130         $(top_srcdir)/config/macro-archive/xsltproc.m4 \
 131         $(top_srcdir)/config/amanda/amplot.m4 \
 132         $(top_srcdir)/config/amanda/bsd-security.m4 \
 133         $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
 134         $(top_srcdir)/config/amanda/bsdudp-security.m4 \
 135         $(top_srcdir)/config/amanda/changer.m4 \
 136         $(top_srcdir)/config/amanda/components.m4 \
 137         $(top_srcdir)/config/amanda/compress.m4 \
 138         $(top_srcdir)/config/amanda/config.m4 \
 139         $(top_srcdir)/config/amanda/debugging.m4 \
 140         $(top_srcdir)/config/amanda/defaults.m4 \
 141         $(top_srcdir)/config/amanda/devprefix.m4 \
 142         $(top_srcdir)/config/amanda/dirs.m4 \
 143         $(top_srcdir)/config/amanda/documentation.m4 \
 144         $(top_srcdir)/config/amanda/dumpers.m4 \
 145         $(top_srcdir)/config/amanda/dvdrw-device.m4 \
 146         $(top_srcdir)/config/amanda/flags.m4 \
 147         $(top_srcdir)/config/amanda/flock.m4 \
 148         $(top_srcdir)/config/amanda/funcs.m4 \
 149         $(top_srcdir)/config/amanda/getfsent.m4 \
 150         $(top_srcdir)/config/amanda/i18n.m4 \
 151         $(top_srcdir)/config/amanda/ipv6.m4 \
 152         $(top_srcdir)/config/amanda/krb5-security.m4 \
 153         $(top_srcdir)/config/amanda/lfs.m4 \
 154         $(top_srcdir)/config/amanda/libs.m4 \
 155         $(top_srcdir)/config/amanda/ndmp-device.m4 \
 156         $(top_srcdir)/config/amanda/net.m4 \
 157         $(top_srcdir)/config/amanda/progs.m4 \
 158         $(top_srcdir)/config/amanda/ps.m4 \
 159         $(top_srcdir)/config/amanda/readdir.m4 \
 160         $(top_srcdir)/config/amanda/readline.m4 \
 161         $(top_srcdir)/config/amanda/rsh-security.m4 \
 162         $(top_srcdir)/config/amanda/s3-device.m4 \
 163         $(top_srcdir)/config/amanda/shmem.m4 \
 164         $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
 165         $(top_srcdir)/config/amanda/ssh-security.m4 \
 166         $(top_srcdir)/config/amanda/summary.m4 \
 167         $(top_srcdir)/config/amanda/swig.m4 \
 168         $(top_srcdir)/config/amanda/syshacks.m4 \
 169         $(top_srcdir)/config/amanda/tape.m4 \
 170         $(top_srcdir)/config/amanda/types.m4 \
 171         $(top_srcdir)/config/amanda/userid.m4 \
 172         $(top_srcdir)/config/amanda/version.m4 \
 173         $(top_srcdir)/config/gnulib/00gnulib.m4 \
 174         $(top_srcdir)/config/gnulib/alloca.m4 \
 175         $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
 176         $(top_srcdir)/config/gnulib/base64.m4 \
 177         $(top_srcdir)/config/gnulib/btowc.m4 \
 178         $(top_srcdir)/config/gnulib/errno_h.m4 \
 179         $(top_srcdir)/config/gnulib/extensions.m4 \
 180         $(top_srcdir)/config/gnulib/float_h.m4 \
 181         $(top_srcdir)/config/gnulib/fseeko.m4 \
 182         $(top_srcdir)/config/gnulib/fsusage.m4 \
 183         $(top_srcdir)/config/gnulib/ftello.m4 \
 184         $(top_srcdir)/config/gnulib/ftruncate.m4 \
 185         $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
 186         $(top_srcdir)/config/gnulib/getopt.m4 \
 187         $(top_srcdir)/config/gnulib/gettimeofday.m4 \
 188         $(top_srcdir)/config/gnulib/gnulib-common.m4 \
 189         $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
 190         $(top_srcdir)/config/gnulib/hostent.m4 \
 191         $(top_srcdir)/config/gnulib/include_next.m4 \
 192         $(top_srcdir)/config/gnulib/inet_ntop.m4 \
 193         $(top_srcdir)/config/gnulib/intmax_t.m4 \
 194         $(top_srcdir)/config/gnulib/localcharset.m4 \
 195         $(top_srcdir)/config/gnulib/locale-fr.m4 \
 196         $(top_srcdir)/config/gnulib/locale-ja.m4 \
 197         $(top_srcdir)/config/gnulib/locale-zh.m4 \
 198         $(top_srcdir)/config/gnulib/lock.m4 \
 199         $(top_srcdir)/config/gnulib/longlong.m4 \
 200         $(top_srcdir)/config/gnulib/lseek.m4 \
 201         $(top_srcdir)/config/gnulib/lstat.m4 \
 202         $(top_srcdir)/config/gnulib/malloc.m4 \
 203         $(top_srcdir)/config/gnulib/mbrtowc.m4 \
 204         $(top_srcdir)/config/gnulib/mbsinit.m4 \
 205         $(top_srcdir)/config/gnulib/mbstate_t.m4 \
 206         $(top_srcdir)/config/gnulib/mkdtemp.m4 \
 207         $(top_srcdir)/config/gnulib/multiarch.m4 \
 208         $(top_srcdir)/config/gnulib/netdb_h.m4 \
 209         $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
 210         $(top_srcdir)/config/gnulib/onceonly.m4 \
 211         $(top_srcdir)/config/gnulib/physmem.m4 \
 212         $(top_srcdir)/config/gnulib/printf.m4 \
 213         $(top_srcdir)/config/gnulib/regex.m4 \
 214         $(top_srcdir)/config/gnulib/safe-read.m4 \
 215         $(top_srcdir)/config/gnulib/safe-write.m4 \
 216         $(top_srcdir)/config/gnulib/servent.m4 \
 217         $(top_srcdir)/config/gnulib/snprintf.m4 \
 218         $(top_srcdir)/config/gnulib/socklen.m4 \
 219         $(top_srcdir)/config/gnulib/sockpfaf.m4 \
 220         $(top_srcdir)/config/gnulib/ssize_t.m4 \
 221         $(top_srcdir)/config/gnulib/stdbool.m4 \
 222         $(top_srcdir)/config/gnulib/stdint.m4 \
 223         $(top_srcdir)/config/gnulib/stdio_h.m4 \
 224         $(top_srcdir)/config/gnulib/stdlib_h.m4 \
 225         $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
 226         $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
 227         $(top_srcdir)/config/gnulib/sys_time_h.m4 \
 228         $(top_srcdir)/config/gnulib/tempname.m4 \
 229         $(top_srcdir)/config/gnulib/threadlib.m4 \
 230         $(top_srcdir)/config/gnulib/unistd_h.m4 \
 231         $(top_srcdir)/config/gnulib/vasnprintf.m4 \
 232         $(top_srcdir)/config/gnulib/visibility.m4 \
 233         $(top_srcdir)/config/gnulib/wchar.m4 \
 234         $(top_srcdir)/config/gnulib/wcrtomb.m4 \
 235         $(top_srcdir)/config/gnulib/wctype.m4 \
 236         $(top_srcdir)/config/gnulib/write.m4 \
 237         $(top_srcdir)/config/gettext-macros/codeset.m4 \
 238         $(top_srcdir)/config/gettext-macros/gettext.m4 \
 239         $(top_srcdir)/config/gettext-macros/glibc21.m4 \
 240         $(top_srcdir)/config/gettext-macros/iconv.m4 \
 241         $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
 242         $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
 243         $(top_srcdir)/config/gettext-macros/lib-link.m4 \
 244         $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
 245         $(top_srcdir)/config/gettext-macros/nls.m4 \
 246         $(top_srcdir)/config/gettext-macros/po.m4 \
 247         $(top_srcdir)/config/gettext-macros/progtest.m4 \
 248         $(top_srcdir)/config/gettext-macros/size_max.m4 \
 249         $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
 250         $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
 251         $(top_srcdir)/config/gettext-macros/wint_t.m4 \
 252         $(top_srcdir)/config/gettext-macros/xsize.m4 \
 253         $(top_srcdir)/config/libtool.m4 \
 254         $(top_srcdir)/config/ltoptions.m4 \
 255         $(top_srcdir)/config/ltsugar.m4 \
 256         $(top_srcdir)/config/ltversion.m4 \
 257         $(top_srcdir)/config/lt~obsolete.m4 $(top_srcdir)/configure.in
 258 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 259         $(ACLOCAL_M4)
 260 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
 261 CONFIG_HEADER = $(top_builddir)/config/config.h
 262 CONFIG_CLEAN_FILES =
 263 CONFIG_CLEAN_VPATH_FILES =
 264 am__installdirs = "$(DESTDIR)$(sbindir)"
 265 PROGRAMS = $(sbin_PROGRAMS)
 266 am__objects_1 = amrecover.$(OBJEXT) display_commands.$(OBJEXT) \
 267         extract_list.$(OBJEXT) help.$(OBJEXT) set_commands.$(OBJEXT)
 268 am_amrecover_OBJECTS = $(am__objects_1) uparse.$(OBJEXT) \
 269         uscan.$(OBJEXT)
 270 amrecover_OBJECTS = $(am_amrecover_OBJECTS)
 271 amrecover_LDADD = $(LDADD)
 272 am__DEPENDENCIES_1 =
 273 amrecover_DEPENDENCIES = ../common-src/libamanda.la \
 274         $(am__DEPENDENCIES_1) ../client-src/libamclient.la \
 275         ../common-src/libamanda.la
 276 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config
 277 depcomp = $(SHELL) $(top_srcdir)/config/depcomp
 278 am__depfiles_maybe = depfiles
 279 am__mv = mv -f
 280 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 281         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 282 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 283         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 284         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 285 CCLD = $(CC)
 286 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 287         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 288         $(LDFLAGS) -o $@
 289 LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
 290 LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 291         --mode=compile $(LEX) $(LFLAGS) $(AM_LFLAGS)
 292 YLWRAP = $(top_srcdir)/config/ylwrap
 293 YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
 294 LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 295         --mode=compile $(YACC) $(YFLAGS) $(AM_YFLAGS)
 296 SOURCES = $(amrecover_SOURCES)
 297 DIST_SOURCES = $(amrecover_SOURCES)
 298 HEADERS = $(noinst_HEADERS)
 299 ETAGS = etags
 300 CTAGS = ctags
 301 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 302 ACLOCAL = @ACLOCAL@
 303 AIX_BACKUP = @AIX_BACKUP@
 304 ALLOCA = @ALLOCA@
 305 ALLOCA_H = @ALLOCA_H@
 306 AMANDA_COMPONENTS = @AMANDA_COMPONENTS@
 307 AMANDA_DBGDIR = @AMANDA_DBGDIR@
 308 AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
 309 AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
 310 AMANDA_SWIG_PERL_CFLAGS = @AMANDA_SWIG_PERL_CFLAGS@
 311 AMANDA_TMPDIR = @AMANDA_TMPDIR@
 312 AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
 313 AMLINT = @AMLINT@
 314 AMLINTFLAGS = @AMLINTFLAGS@
 315 AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
 316 AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
 317 AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
 318 AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
 319 AMTAR = @AMTAR@
 320 APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
 321 APPLICATION_DIR = @APPLICATION_DIR@
 322 AR = @AR@
 323 ARPA_INET_H = @ARPA_INET_H@
 324 ASSERTIONS = @ASSERTIONS@
 325 AUTOCONF = @AUTOCONF@
 326 AUTOHEADER = @AUTOHEADER@
 327 AUTOMAKE = @AUTOMAKE@
 328 AWK = @AWK@
 329 BASH = @BASH@
 330 BINARY_OWNER = @BINARY_OWNER@
 331 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
 332 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
 333 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
 334 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
 335 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 336 BSDTCP_SECURITY = @BSDTCP_SECURITY@
 337 BSDUDP_SECURITY = @BSDUDP_SECURITY@
 338 BSD_SECURITY = @BSD_SECURITY@
 339 CAT = @CAT@
 340 CC = @CC@
 341 CCDEPMODE = @CCDEPMODE@
 342 CFLAGS = @CFLAGS@
 343 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 344 CHECK_USERID = @CHECK_USERID@
 345 CHIO = @CHIO@
 346 CHS = @CHS@
 347 CLIENT_LOGIN = @CLIENT_LOGIN@
 348 CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
 349 COMPRESS = @COMPRESS@
 350 COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
 351 COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
 352 COMPRESS_PATH = @COMPRESS_PATH@
 353 COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
 354 CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
 355 CONFIG_DIR = @CONFIG_DIR@
 356 CPP = @CPP@
 357 CPPFLAGS = @CPPFLAGS@
 358 CURL_CONFIG = @CURL_CONFIG@
 359 CYGPATH_W = @CYGPATH_W@
 360 DD = @DD@
 361 DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
 362 DEFAULT_CONFIG = @DEFAULT_CONFIG@
 363 DEFAULT_MAILER = @DEFAULT_MAILER@
 364 DEFAULT_SERVER = @DEFAULT_SERVER@
 365 DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
 366 DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
 367 DEFS = @DEFS@
 368 DEPDIR = @DEPDIR@
 369 DOC_BUILD_DATE = @DOC_BUILD_DATE@
 370 DSYMUTIL = @DSYMUTIL@
 371 DUMP = @DUMP@
 372 DUMPBIN = @DUMPBIN@
 373 DUMP_RETURNS_1 = @DUMP_RETURNS_1@
 374 ECHO_C = @ECHO_C@
 375 ECHO_N = @ECHO_N@
 376 ECHO_T = @ECHO_T@
 377 EGREP = @EGREP@
 378 EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
 379 EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
 380 ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
 381 ENOLINK_VALUE = @ENOLINK_VALUE@
 382 EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
 383 EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
 384 ERRNO_H = @ERRNO_H@
 385 EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
 386 EXEEXT = @EXEEXT@
 387 FGREP = @FGREP@
 388 FLOAT_H = @FLOAT_H@
 389 GETADDRINFO_LIB = @GETADDRINFO_LIB@
 390 GETCONF = @GETCONF@
 391 GETOPT_H = @GETOPT_H@
 392 GETTEXT = @GETTEXT@
 393 GIT = @GIT@
 394 GLIBC21 = @GLIBC21@
 395 GLIB_CFLAGS = @GLIB_CFLAGS@
 396 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
 397 GLIB_LIBS = @GLIB_LIBS@
 398 GLIB_MKENUMS = @GLIB_MKENUMS@
 399 GMSGFMT = @GMSGFMT@
 400 GMSGFMT_015 = @GMSGFMT_015@
 401 GNULIB_ACCEPT = @GNULIB_ACCEPT@
 402 GNULIB_ATOLL = @GNULIB_ATOLL@
 403 GNULIB_BIND = @GNULIB_BIND@
 404 GNULIB_BTOWC = @GNULIB_BTOWC@
 405 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
 406 GNULIB_CHOWN = @GNULIB_CHOWN@
 407 GNULIB_CLOSE = @GNULIB_CLOSE@
 408 GNULIB_CONNECT = @GNULIB_CONNECT@
 409 GNULIB_DPRINTF = @GNULIB_DPRINTF@
 410 GNULIB_DUP2 = @GNULIB_DUP2@
 411 GNULIB_ENVIRON = @GNULIB_ENVIRON@
 412 GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
 413 GNULIB_FCHDIR = @GNULIB_FCHDIR@
 414 GNULIB_FCLOSE = @GNULIB_FCLOSE@
 415 GNULIB_FFLUSH = @GNULIB_FFLUSH@
 416 GNULIB_FOPEN = @GNULIB_FOPEN@
 417 GNULIB_FPRINTF = @GNULIB_FPRINTF@
 418 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
 419 GNULIB_FPUTC = @GNULIB_FPUTC@
 420 GNULIB_FPUTS = @GNULIB_FPUTS@
 421 GNULIB_FREOPEN = @GNULIB_FREOPEN@
 422 GNULIB_FSEEK = @GNULIB_FSEEK@
 423 GNULIB_FSEEKO = @GNULIB_FSEEKO@
 424 GNULIB_FSYNC = @GNULIB_FSYNC@
 425 GNULIB_FTELL = @GNULIB_FTELL@
 426 GNULIB_FTELLO = @GNULIB_FTELLO@
 427 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
 428 GNULIB_FWRITE = @GNULIB_FWRITE@
 429 GNULIB_GETADDRINFO = @GNULIB_GETADDRINFO@
 430 GNULIB_GETCWD = @GNULIB_GETCWD@
 431 GNULIB_GETDELIM = @GNULIB_GETDELIM@
 432 GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
 433 GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
 434 GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
 435 GNULIB_GETLINE = @GNULIB_GETLINE@
 436 GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
 437 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
 438 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
 439 GNULIB_GETPEERNAME = @GNULIB_GETPEERNAME@
 440 GNULIB_GETSOCKNAME = @GNULIB_GETSOCKNAME@
 441 GNULIB_GETSOCKOPT = @GNULIB_GETSOCKOPT@
 442 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
 443 GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
 444 GNULIB_INET_NTOP = @GNULIB_INET_NTOP@
 445 GNULIB_INET_PTON = @GNULIB_INET_PTON@
 446 GNULIB_LCHMOD = @GNULIB_LCHMOD@
 447 GNULIB_LCHOWN = @GNULIB_LCHOWN@
 448 GNULIB_LINK = @GNULIB_LINK@
 449 GNULIB_LISTEN = @GNULIB_LISTEN@
 450 GNULIB_LSEEK = @GNULIB_LSEEK@
 451 GNULIB_LSTAT = @GNULIB_LSTAT@
 452 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
 453 GNULIB_MBRLEN = @GNULIB_MBRLEN@
 454 GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
 455 GNULIB_MBSINIT = @GNULIB_MBSINIT@
 456 GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
 457 GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
 458 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
 459 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
 460 GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
 461 GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
 462 GNULIB_PERROR = @GNULIB_PERROR@
 463 GNULIB_PRINTF = @GNULIB_PRINTF@
 464 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
 465 GNULIB_PUTC = @GNULIB_PUTC@
 466 GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
 467 GNULIB_PUTENV = @GNULIB_PUTENV@
 468 GNULIB_PUTS = @GNULIB_PUTS@
 469 GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
 470 GNULIB_READLINK = @GNULIB_READLINK@
 471 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
 472 GNULIB_RECV = @GNULIB_RECV@
 473 GNULIB_RECVFROM = @GNULIB_RECVFROM@
 474 GNULIB_RPMATCH = @GNULIB_RPMATCH@
 475 GNULIB_SEND = @GNULIB_SEND@
 476 GNULIB_SENDTO = @GNULIB_SENDTO@
 477 GNULIB_SETENV = @GNULIB_SETENV@
 478 GNULIB_SETSOCKOPT = @GNULIB_SETSOCKOPT@
 479 GNULIB_SHUTDOWN = @GNULIB_SHUTDOWN@
 480 GNULIB_SLEEP = @GNULIB_SLEEP@
 481 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
 482 GNULIB_SOCKET = @GNULIB_SOCKET@
 483 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
 484 GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
 485 GNULIB_STRTOD = @GNULIB_STRTOD@
 486 GNULIB_STRTOLL = @GNULIB_STRTOLL@
 487 GNULIB_STRTOULL = @GNULIB_STRTOULL@
 488 GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
 489 GNULIB_UNSETENV = @GNULIB_UNSETENV@
 490 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
 491 GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
 492 GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
 493 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
 494 GNULIB_VPRINTF = @GNULIB_VPRINTF@
 495 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
 496 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
 497 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
 498 GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
 499 GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
 500 GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
 501 GNULIB_WCTOB = @GNULIB_WCTOB@
 502 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
 503 GNULIB_WRITE = @GNULIB_WRITE@
 504 GNUPLOT = @GNUPLOT@
 505 GNUTAR = @GNUTAR@
 506 GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
 507 GOBJECT_QUERY = @GOBJECT_QUERY@
 508 GREP = @GREP@
 509 GZIP = @GZIP@
 510 HAVE_ARPA_INET_H = @HAVE_ARPA_INET_H@
 511 HAVE_ATOLL = @HAVE_ATOLL@
 512 HAVE_BTOWC = @HAVE_BTOWC@
 513 HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
 514 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
 515 HAVE_DECL_FREEADDRINFO = @HAVE_DECL_FREEADDRINFO@
 516 HAVE_DECL_GAI_STRERROR = @HAVE_DECL_GAI_STRERROR@
 517 HAVE_DECL_GETADDRINFO = @HAVE_DECL_GETADDRINFO@
 518 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
 519 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
 520 HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
 521 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
 522 HAVE_DECL_GETNAMEINFO = @HAVE_DECL_GETNAMEINFO@
 523 HAVE_DECL_INET_NTOP = @HAVE_DECL_INET_NTOP@
 524 HAVE_DECL_INET_PTON = @HAVE_DECL_INET_PTON@
 525 HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
 526 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
 527 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
 528 HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
 529 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
 530 HAVE_DPRINTF = @HAVE_DPRINTF@
 531 HAVE_DUP2 = @HAVE_DUP2@
 532 HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
 533 HAVE_FSEEKO = @HAVE_FSEEKO@
 534 HAVE_FSYNC = @HAVE_FSYNC@
 535 HAVE_FTELLO = @HAVE_FTELLO@
 536 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
 537 HAVE_GETDOMAINNAME = @HAVE_GETDOMAINNAME@
 538 HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
 539 HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
 540 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
 541 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
 542 HAVE_GETUSERSHELL = @HAVE_GETUSERSHELL@
 543 HAVE_GZIP = @HAVE_GZIP@
 544 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
 545 HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
 546 HAVE_LCHMOD = @HAVE_LCHMOD@
 547 HAVE_LINK = @HAVE_LINK@
 548 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
 549 HAVE_LSTAT = @HAVE_LSTAT@
 550 HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
 551 HAVE_MBRLEN = @HAVE_MBRLEN@
 552 HAVE_MBRTOWC = @HAVE_MBRTOWC@
 553 HAVE_MBSINIT = @HAVE_MBSINIT@
 554 HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
 555 HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
 556 HAVE_MKDTEMP = @HAVE_MKDTEMP@
 557 HAVE_NETDB_H = @HAVE_NETDB_H@
 558 HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
 559 HAVE_OS_H = @HAVE_OS_H@
 560 HAVE_RANDOM_H = @HAVE_RANDOM_H@
 561 HAVE_RANDOM_R = @HAVE_RANDOM_R@
 562 HAVE_READLINK = @HAVE_READLINK@
 563 HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
 564 HAVE_RPMATCH = @HAVE_RPMATCH@
 565 HAVE_SETENV = @HAVE_SETENV@
 566 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
 567 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
 568 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
 569 HAVE_SLEEP = @HAVE_SLEEP@
 570 HAVE_STDINT_H = @HAVE_STDINT_H@
 571 HAVE_STRTOD = @HAVE_STRTOD@
 572 HAVE_STRTOLL = @HAVE_STRTOLL@
 573 HAVE_STRTOULL = @HAVE_STRTOULL@
 574 HAVE_STRUCT_ADDRINFO = @HAVE_STRUCT_ADDRINFO@
 575 HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
 576 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
 577 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
 578 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
 579 HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
 580 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
 581 HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
 582 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
 583 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
 584 HAVE_UNISTD_H = @HAVE_UNISTD_H@
 585 HAVE_UNSETENV = @HAVE_UNSETENV@
 586 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
 587 HAVE_VASPRINTF = @HAVE_VASPRINTF@
 588 HAVE_VDPRINTF = @HAVE_VDPRINTF@
 589 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 590 HAVE_WCHAR_H = @HAVE_WCHAR_H@
 591 HAVE_WCRTOMB = @HAVE_WCRTOMB@
 592 HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
 593 HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
 594 HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
 595 HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
 596 HAVE_WINT_T = @HAVE_WINT_T@
 597 HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
 598 HAVE__BOOL = @HAVE__BOOL@
 599 HOSTENT_LIB = @HOSTENT_LIB@
 600 INCLUDE_NEXT = @INCLUDE_NEXT@
 601 INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
 602 INSTALL = @INSTALL@
 603 INSTALL_DATA = @INSTALL_DATA@
 604 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 605 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 606 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 607 INTLLIBS = @INTLLIBS@
 608 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 609 KRB5_SECURITY = @KRB5_SECURITY@
 610 LD = @LD@
 611 LDFLAGS = @LDFLAGS@
 612 LEX = @LEX@
 613 LEXLIB = @LEXLIB@
 614 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 615 LIBCURL = @LIBCURL@
 616 LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
 617 LIBICONV = @LIBICONV@
 618 LIBINTL = @LIBINTL@
 619 LIBMULTITHREAD = @LIBMULTITHREAD@
 620 LIBOBJS = @LIBOBJS@
 621 LIBPTH = @LIBPTH@
 622 LIBS = @LIBS@
 623 LIBTHREAD = @LIBTHREAD@
 624 LIBTOOL = @LIBTOOL@
 625 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 626 LIPO = @LIPO@
 627 LN_S = @LN_S@
 628 LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
 629 LOCALE_FR = @LOCALE_FR@
 630 LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
 631 LOCALE_JA = @LOCALE_JA@
 632 LOCALE_ZH_CN = @LOCALE_ZH_CN@
 633 LOCKING = @LOCKING@
 634 LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
 635 LPR = @LPR@
 636 LPRFLAG = @LPRFLAG@
 637 LTALLOCA = @LTALLOCA@
 638 LTLIBICONV = @LTLIBICONV@
 639 LTLIBINTL = @LTLIBINTL@
 640 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
 641 LTLIBOBJS = @LTLIBOBJS@
 642 LTLIBPTH = @LTLIBPTH@
 643 LTLIBTHREAD = @LTLIBTHREAD@
 644 MAILER = @MAILER@
 645 MAKEINFO = @MAKEINFO@
 646 MCUTIL = @MCUTIL@
 647 MKDIR_P = @MKDIR_P@
 648 MSGFMT = @MSGFMT@
 649 MSGFMT_015 = @MSGFMT_015@
 650 MSGMERGE = @MSGMERGE@
 651 MT = @MT@
 652 MTX = @MTX@
 653 MT_FILE_FLAG = @MT_FILE_FLAG@
 654 NETDB_H = @NETDB_H@
 655 NETINET_IN_H = @NETINET_IN_H@
 656 NEXT_ARPA_INET_H = @NEXT_ARPA_INET_H@
 657 NEXT_ERRNO_H = @NEXT_ERRNO_H@
 658 NEXT_FLOAT_H = @NEXT_FLOAT_H@
 659 NEXT_NETDB_H = @NEXT_NETDB_H@
 660 NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
 661 NEXT_STDINT_H = @NEXT_STDINT_H@
 662 NEXT_STDIO_H = @NEXT_STDIO_H@
 663 NEXT_STDLIB_H = @NEXT_STDLIB_H@
 664 NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
 665 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
 666 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
 667 NEXT_UNISTD_H = @NEXT_UNISTD_H@
 668 NEXT_WCHAR_H = @NEXT_WCHAR_H@
 669 NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
 670 NM = @NM@
 671 NMEDIT = @NMEDIT@
 672 OBJEXT = @OBJEXT@
 673 OTOOL = @OTOOL@
 674 OTOOL64 = @OTOOL64@
 675 PACKAGE = @PACKAGE@
 676 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 677 PACKAGE_NAME = @PACKAGE_NAME@
 678 PACKAGE_STRING = @PACKAGE_STRING@
 679 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 680 PACKAGE_VERSION = @PACKAGE_VERSION@
 681 PATH_SEPARATOR = @PATH_SEPARATOR@
 682 PCAT = @PCAT@
 683 PERL = @PERL@
 684 PERLEXTLIBS = @PERLEXTLIBS@
 685 PERL_INC = @PERL_INC@
 686 PKG_CONFIG = @PKG_CONFIG@
 687 POSUB = @POSUB@
 688 PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
 689 PS = @PS@
 690 PS_ARGUMENT = @PS_ARGUMENT@
 691 PS_ARGUMENT_ARGS = @PS_ARGUMENT_ARGS@
 692 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
 693 RANLIB = @RANLIB@
 694 READLINE_LIBS = @READLINE_LIBS@
 695 REPLACE_BTOWC = @REPLACE_BTOWC@
 696 REPLACE_CHOWN = @REPLACE_CHOWN@
 697 REPLACE_CLOSE = @REPLACE_CLOSE@
 698 REPLACE_DPRINTF = @REPLACE_DPRINTF@
 699 REPLACE_FCHDIR = @REPLACE_FCHDIR@
 700 REPLACE_FCLOSE = @REPLACE_FCLOSE@
 701 REPLACE_FFLUSH = @REPLACE_FFLUSH@
 702 REPLACE_FOPEN = @REPLACE_FOPEN@
 703 REPLACE_FPRINTF = @REPLACE_FPRINTF@
 704 REPLACE_FREOPEN = @REPLACE_FREOPEN@
 705 REPLACE_FSEEK = @REPLACE_FSEEK@
 706 REPLACE_FSEEKO = @REPLACE_FSEEKO@
 707 REPLACE_FTELL = @REPLACE_FTELL@
 708 REPLACE_FTELLO = @REPLACE_FTELLO@
 709 REPLACE_GETCWD = @REPLACE_GETCWD@
 710 REPLACE_GETLINE = @REPLACE_GETLINE@
 711 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
 712 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
 713 REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
 714 REPLACE_LCHOWN = @REPLACE_LCHOWN@
 715 REPLACE_LSEEK = @REPLACE_LSEEK@
 716 REPLACE_LSTAT = @REPLACE_LSTAT@
 717 REPLACE_MBRLEN = @REPLACE_MBRLEN@
 718 REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
 719 REPLACE_MBSINIT = @REPLACE_MBSINIT@
 720 REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
 721 REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
 722 REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
 723 REPLACE_MKDIR = @REPLACE_MKDIR@
 724 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
 725 REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
 726 REPLACE_PERROR = @REPLACE_PERROR@
 727 REPLACE_PRINTF = @REPLACE_PRINTF@
 728 REPLACE_PUTENV = @REPLACE_PUTENV@
 729 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
 730 REPLACE_SPRINTF = @REPLACE_SPRINTF@
 731 REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
 732 REPLACE_STRTOD = @REPLACE_STRTOD@
 733 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
 734 REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
 735 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
 736 REPLACE_VPRINTF = @REPLACE_VPRINTF@
 737 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
 738 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
 739 REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
 740 REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
 741 REPLACE_WCTOB = @REPLACE_WCTOB@
 742 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
 743 REPLACE_WRITE = @REPLACE_WRITE@
 744 RESTORE = @RESTORE@
 745 RPCGEN = @RPCGEN@
 746 RSH_SECURITY = @RSH_SECURITY@
 747 SAMBA_CLIENT = @SAMBA_CLIENT@
 748 SED = @SED@
 749 SERVENT_LIB = @SERVENT_LIB@
 750 SERVICE_SUFFIX = @SERVICE_SUFFIX@
 751 SETUID_GROUP = @SETUID_GROUP@
 752 SET_MAKE = @SET_MAKE@
 753 SHELL = @SHELL@
 754 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
 755 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
 756 SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
 757 SORT = @SORT@
 758 SSH = @SSH@
 759 SSH_SECURITY = @SSH_SECURITY@
 760 STAR = @STAR@
 761 STDBOOL_H = @STDBOOL_H@
 762 STDINT_H = @STDINT_H@
 763 STRIP = @STRIP@
 764 SVN = @SVN@
 765 SWIG = @SWIG@
 766 SWIG_LIB = @SWIG_LIB@
 767 SYS_SOCKET_H = @SYS_SOCKET_H@
 768 SYS_STAT_H = @SYS_STAT_H@
 769 SYS_TIME_H = @SYS_TIME_H@
 770 TCPPORTRANGE = @TCPPORTRANGE@
 771 UDPPORTRANGE = @UDPPORTRANGE@
 772 UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
 773 UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
 774 UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
 775 USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
 776 USE_NLS = @USE_NLS@
 777 USE_RUNDUMP = @USE_RUNDUMP@
 778 VDUMP = @VDUMP@
 779 VERSION = @VERSION@
 780 VERSION_COMMENT = @VERSION_COMMENT@
 781 VERSION_MAJOR = @VERSION_MAJOR@
 782 VERSION_MINOR = @VERSION_MINOR@
 783 VERSION_PATCH = @VERSION_PATCH@
 784 VOID_UNSETENV = @VOID_UNSETENV@
 785 VRESTORE = @VRESTORE@
 786 VXDUMP = @VXDUMP@
 787 VXRESTORE = @VXRESTORE@
 788 WCHAR_H = @WCHAR_H@
 789 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
 790 WCTYPE_H = @WCTYPE_H@
 791 WINT_T_SUFFIX = @WINT_T_SUFFIX@
 792 XFSDUMP = @XFSDUMP@
 793 XFSRESTORE = @XFSRESTORE@
 794 XGETTEXT = @XGETTEXT@
 795 XGETTEXT_015 = @XGETTEXT_015@
 796 XSLREL = @XSLREL@
 797 XSLTPROC = @XSLTPROC@
 798 XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
 799 YACC = @YACC@
 800 YFLAGS = @YFLAGS@
 801 _libcurl_config = @_libcurl_config@
 802 abs_builddir = @abs_builddir@
 803 abs_srcdir = @abs_srcdir@
 804 abs_top_builddir = @abs_top_builddir@
 805 abs_top_srcdir = @abs_top_srcdir@
 806 ac_ct_CC = @ac_ct_CC@
 807 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 808 am__include = @am__include@
 809 am__leading_dot = @am__leading_dot@
 810 am__quote = @am__quote@
 811 am__tar = @am__tar@
 812 am__untar = @am__untar@
 813 amdatadir = @amdatadir@
 814 amincludedir = @amincludedir@
 815 amlibdir = @amlibdir@
 816 amlibexecdir = @amlibexecdir@
 817 amperldir = @amperldir@
 818 bindir = @bindir@
 819 build = @build@
 820 build_alias = @build_alias@
 821 build_cpu = @build_cpu@
 822 build_os = @build_os@
 823 build_vendor = @build_vendor@
 824 builddir = @builddir@
 825 datadir = @datadir@
 826 datarootdir = @datarootdir@
 827 docdir = @docdir@
 828 dvidir = @dvidir@
 829 exec_prefix = @exec_prefix@
 830 gl_LIBOBJS = @gl_LIBOBJS@
 831 gl_LTLIBOBJS = @gl_LTLIBOBJS@
 832 gltests_LIBOBJS = @gltests_LIBOBJS@
 833 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
 834 host = @host@
 835 host_alias = @host_alias@
 836 host_cpu = @host_cpu@
 837 host_os = @host_os@
 838 host_vendor = @host_vendor@
 839 htmldir = @htmldir@
 840 includedir = @includedir@
 841 infodir = @infodir@
 842 install_sh = @install_sh@
 843 libdir = @libdir@
 844 libexecdir = @libexecdir@
 845 localedir = @localedir@
 846 localstatedir = @localstatedir@
 847 lt_ECHO = @lt_ECHO@
 848 mandir = @mandir@
 849 mkdir_p = @mkdir_p@
 850 oldincludedir = @oldincludedir@
 851 pdfdir = @pdfdir@
 852 prefix = @prefix@
 853 program_transform_name = @program_transform_name@
 854 psdir = @psdir@
 855 sbindir = @sbindir@
 856 sharedstatedir = @sharedstatedir@
 857 srcdir = @srcdir@
 858 sysconfdir = @sysconfdir@
 859 target_alias = @target_alias@
 860 top_build_prefix = @top_build_prefix@
 861 top_builddir = @top_builddir@
 862 top_srcdir = @top_srcdir@
 863 SUFFIXES =
 864 EXTRA_DIST =
 865 BUILT_SOURCES =
 866 MOSTLYCLEANFILES =
 867 CLEANFILES =
 868 DISTCLEANFILES = $(am__append_1)
 869 MAINTAINERCLEANFILES =
 870
 871 # sed expression to strip leading directories from a filename; this converts e.g.,
 872 # src/foo/bar.so to bar.so.
 873 strip_leading_dirs = s|^.*/||
 874 @WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 875 @WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
 876
 877
 878 # define a snippet of the scripts below to either perform a chown/chmod operation,
 879 # or record that operation in the logfile.  On entry to the snippet, $$dest is the
 880 # destination directory, $$cmd is the srcdir-relative pathname of the target file,
 881 # $$chown is the ownership, and $$chmod is the permission pattern.
 882 @WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 883 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
 884 @WANT_INSTALLPERMS_TRUE@        echo chown "$$chown" "$$pa"; \
 885 @WANT_INSTALLPERMS_TRUE@        chown "$$chown" "$$pa" || exit 1; \
 886 @WANT_INSTALLPERMS_TRUE@    fi; \
 887 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
 888 @WANT_INSTALLPERMS_TRUE@        echo chmod "$$chmod" "$$pa"; \
 889 @WANT_INSTALLPERMS_TRUE@        chmod "$$chmod" "$$pa" || exit 1; \
 890 @WANT_INSTALLPERMS_TRUE@    fi
 891
 892 @WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
 893 INCLUDES = -I$(top_builddir)/common-src \
 894                 -I$(top_srcdir)/common-src   \
 895                 -I$(top_srcdir)/client-src   \
 896                 -I$(top_srcdir)/amandad-src   \
 897                 -I$(top_srcdir)/gnulib
 898
 899 AM_CFLAGS = $(AMANDA_WARNING_CFLAGS)
 900 AM_LDFLAGS = $(AMANDA_STATIC_LDFLAGS)
 901 LINT = $(AMLINT)
 902 LINTFLAGS = $(AMLINTFLAGS)
 903
 904 ###
 905 # Because libamanda includes routines (e.g. regex) provided by some system
 906 # libraries, and because of the way libtool sets up the command line, we
 907 # need to list libamanda twice here, first to override the system library
 908 # routines, and second to pick up any references in the other libraries.
 909 ###
 910 LDADD = ../common-src/libamanda.la \
 911         @LEXLIB@ \
 912         $(READLINE_LIBS) \
 913         ../client-src/libamclient.la \
 914         ../common-src/libamanda.la
 915
 916 amrecover_CSRC = amrecover.c                                    \
 917                         display_commands.c              extract_list.c  \
 918                         help.c                          set_commands.c
 919
 920 amrecover_SOURCES = $(amrecover_CSRC)   uparse.y        uscan.l
 921 noinst_HEADERS = amrecover.h uparse.h
 922 AM_YFLAGS = -d
 923 INSTALLPERMS_exec = \
 924         dest=$(sbindir) chown=amanda chmod=0750 $(sbin_PROGRAMS)
 925
 926 all: $(BUILT_SOURCES)
 927         $(MAKE) $(AM_MAKEFLAGS) all-am
 928
 929 .SUFFIXES:
 930 .SUFFIXES: .c .l .lo .o .obj .y
 931 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(top_srcdir)/config/automake/precompile.am $(am__configure_deps)
 932         @for dep in $?; do \
 933           case '$(am__configure_deps)' in \
 934             *$$dep*) \
 935               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 936                 && { if test -f $@; then exit 0; else break; fi; }; \
 937               exit 1;; \
 938           esac; \
 939         done; \
 940         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu recover-src/Makefile'; \
 941         $(am__cd) $(top_srcdir) && \
 942           $(AUTOMAKE) --gnu recover-src/Makefile
 943 .PRECIOUS: Makefile
 944 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 945         @case '$?' in \
 946           *config.status*) \
 947             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 948           *) \
 949             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 950             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 951         esac;
 952
 953 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 954         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 955
 956 $(top_srcdir)/configure:  $(am__configure_deps)
 957         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 958 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 959         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 960 $(am__aclocal_m4_deps):
 961 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 962         @$(NORMAL_INSTALL)
 963         test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
 964         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 965         for p in $$list; do echo "$$p $$p"; done | \
 966         sed 's/$(EXEEXT)$$//' | \
 967         while read p p1; do if test -f $$p || test -f $$p1; \
 968           then echo "$$p"; echo "$$p"; else :; fi; \
 969         done | \
 970         sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
 971             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 972         sed 'N;N;N;s,\n, ,g' | \
 973         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 974           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 975             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 976             else { print "f", $$3 "/" $$4, $$1; } } \
 977           END { for (d in files) print "f", d, files[d] }' | \
 978         while read type dir files; do \
 979             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 980             test -z "$$files" || { \
 981             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
 982             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
 983             } \
 984         ; done
 985
 986 uninstall-sbinPROGRAMS:
 987         @$(NORMAL_UNINSTALL)
 988         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 989         files=`for p in $$list; do echo "$$p"; done | \
 990           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 991               -e 's/$$/$(EXEEXT)/' `; \
 992         test -n "$$list" || exit 0; \
 993         echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 994         cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 995
 996 clean-sbinPROGRAMS:
 997         @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
 998         echo " rm -f" $$list; \
 999         rm -f $$list || exit $$?; \
1000         test -n "$(EXEEXT)" || exit 0; \
1001         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
1002         echo " rm -f" $$list; \
1003         rm -f $$list
1004 uparse.h: uparse.c
1005         @if test ! -f $@; then \
1006           rm -f uparse.c; \
1007           $(MAKE) $(AM_MAKEFLAGS) uparse.c; \
1008         else :; fi
1009 amrecover$(EXEEXT): $(amrecover_OBJECTS) $(amrecover_DEPENDENCIES)
1010         @rm -f amrecover$(EXEEXT)
1011         $(LINK) $(amrecover_OBJECTS) $(amrecover_LDADD) $(LIBS)
1012
1013 mostlyclean-compile:
1014         -rm -f *.$(OBJEXT)
1015
1016 distclean-compile:
1017         -rm -f *.tab.c
1018
1019 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amrecover.Po@am__quote@
1020 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/display_commands.Po@am__quote@
1021 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extract_list.Po@am__quote@
1022 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/help.Po@am__quote@
1023 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_commands.Po@am__quote@
1024 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uparse.Po@am__quote@
1025 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uscan.Po@am__quote@
1026
1027 .c.o:
1028 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
1029 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
1030 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1031 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1032 @am__fastdepCC_FALSE@   $(COMPILE) -c $<
1033
1034 .c.obj:
1035 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
1036 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
1037 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1038 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1039 @am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
1040
1041 .c.lo:
1042 @am__fastdepCC_TRUE@    $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
1043 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
1044 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
1045 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1046 @am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
1047
1048 .l.c:
1049         $(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
1050
1051 .y.c:
1052         $(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
1053
1054 mostlyclean-libtool:
1055         -rm -f *.lo
1056
1057 clean-libtool:
1058         -rm -rf .libs _libs
1059
1060 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1061         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1062         unique=`for i in $$list; do \
1063             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1064           done | \
1065           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1066               END { if (nonempty) { for (i in files) print i; }; }'`; \
1067         mkid -fID $$unique
1068 tags: TAGS
1069
1070 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1071                 $(TAGS_FILES) $(LISP)
1072         set x; \
1073         here=`pwd`; \
1074         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1075         unique=`for i in $$list; do \
1076             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1077           done | \
1078           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1079               END { if (nonempty) { for (i in files) print i; }; }'`; \
1080         shift; \
1081         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1082           test -n "$$unique" || unique=$$empty_fix; \
1083           if test $$# -gt 0; then \
1084             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1085               "$$@" $$unique; \
1086           else \
1087             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1088               $$unique; \
1089           fi; \
1090         fi
1091 ctags: CTAGS
1092 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1093                 $(TAGS_FILES) $(LISP)
1094         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1095         unique=`for i in $$list; do \
1096             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1097           done | \
1098           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1099               END { if (nonempty) { for (i in files) print i; }; }'`; \
1100         test -z "$(CTAGS_ARGS)$$unique" \
1101           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1102              $$unique
1103
1104 GTAGS:
1105         here=`$(am__cd) $(top_builddir) && pwd` \
1106           && $(am__cd) $(top_srcdir) \
1107           && gtags -i $(GTAGS_ARGS) "$$here"
1108
1109 distclean-tags:
1110         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1111
1112 distdir: $(DISTFILES)
1113         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1114         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1115         list='$(DISTFILES)'; \
1116           dist_files=`for file in $$list; do echo $$file; done | \
1117           sed -e "s|^$$srcdirstrip/||;t" \
1118               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1119         case $$dist_files in \
1120           */*) $(MKDIR_P) `echo "$$dist_files" | \
1121                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1122                            sort -u` ;; \
1123         esac; \
1124         for file in $$dist_files; do \
1125           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1126           if test -d $$d/$$file; then \
1127             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1128             if test -d "$(distdir)/$$file"; then \
1129               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1130             fi; \
1131             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1132               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1133               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1134             fi; \
1135             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1136           else \
1137             test -f "$(distdir)/$$file" \
1138             || cp -p $$d/$$file "$(distdir)/$$file" \
1139             || exit 1; \
1140           fi; \
1141         done
1142 check-am: all-am
1143 check: $(BUILT_SOURCES)
1144         $(MAKE) $(AM_MAKEFLAGS) check-am
1145 all-am: Makefile $(PROGRAMS) $(HEADERS)
1146 installdirs:
1147         for dir in "$(DESTDIR)$(sbindir)"; do \
1148           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1149         done
1150 install: $(BUILT_SOURCES)
1151         $(MAKE) $(AM_MAKEFLAGS) install-am
1152 install-exec: install-exec-am
1153 install-data: install-data-am
1154 uninstall: uninstall-am
1155
1156 install-am: all-am
1157         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1158
1159 installcheck: installcheck-am
1160 install-strip:
1161         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1162           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1163           `test -z '$(STRIP)' || \
1164             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1165 mostlyclean-generic:
1166         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
1167
1168 clean-generic:
1169         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1170
1171 distclean-generic:
1172         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1173         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1174         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1175
1176 maintainer-clean-generic:
1177         @echo "This command is intended for maintainers to use"
1178         @echo "it deletes files that may require special tools to rebuild."
1179         -rm -f uparse.c
1180         -rm -f uparse.h
1181         -rm -f uscan.c
1182         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1183         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1184 clean: clean-am
1185
1186 clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
1187         mostlyclean-am
1188
1189 distclean: distclean-am
1190         -rm -rf ./$(DEPDIR)
1191         -rm -f Makefile
1192 distclean-am: clean-am distclean-compile distclean-generic \
1193         distclean-tags
1194
1195 dvi: dvi-am
1196
1197 dvi-am:
1198
1199 html: html-am
1200
1201 html-am:
1202
1203 info: info-am
1204
1205 info-am:
1206
1207 install-data-am:
1208         @$(NORMAL_INSTALL)
1209         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1210 install-dvi: install-dvi-am
1211
1212 install-dvi-am:
1213
1214 install-exec-am: install-sbinPROGRAMS
1215         @$(NORMAL_INSTALL)
1216         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1217 install-html: install-html-am
1218
1219 install-html-am:
1220
1221 install-info: install-info-am
1222
1223 install-info-am:
1224
1225 install-man:
1226
1227 install-pdf: install-pdf-am
1228
1229 install-pdf-am:
1230
1231 install-ps: install-ps-am
1232
1233 install-ps-am:
1234
1235 installcheck-am:
1236
1237 maintainer-clean: maintainer-clean-am
1238         -rm -rf ./$(DEPDIR)
1239         -rm -f Makefile
1240 maintainer-clean-am: distclean-am maintainer-clean-generic
1241
1242 mostlyclean: mostlyclean-am
1243
1244 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1245         mostlyclean-libtool
1246
1247 pdf: pdf-am
1248
1249 pdf-am:
1250
1251 ps: ps-am
1252
1253 ps-am:
1254
1255 uninstall-am: uninstall-sbinPROGRAMS
1256
1257 .MAKE: all check install install-am install-data-am install-exec-am \
1258         install-strip
1259
1260 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
1261         clean-libtool clean-sbinPROGRAMS ctags distclean \
1262         distclean-compile distclean-generic distclean-libtool \
1263         distclean-tags distdir dvi dvi-am html html-am info info-am \
1264         install install-am install-data install-data-am \
1265         install-data-hook install-dvi install-dvi-am install-exec \
1266         install-exec-am install-exec-hook install-html install-html-am \
1267         install-info install-info-am install-man install-pdf \
1268         install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
1269         install-strip installcheck installcheck-am installdirs \
1270         maintainer-clean maintainer-clean-generic mostlyclean \
1271         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1272         pdf pdf-am ps ps-am tags uninstall uninstall-am \
1273         uninstall-sbinPROGRAMS
1274
1275
1276 installperms-exec:
1277         @installperms="$(INSTALLPERMS_exec)"; \
1278         test -n "$$installperms" && echo "Setting installation permissions on executables"; \
1279         dest=; chown=; chmod=; \
1280         for cmd in $$installperms; do \
1281             case "$$cmd" in \
1282                 chown=amanda) \
1283                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1284                 dest=*|chown=*|chmod=*) \
1285                         echo "  ($$cmd)"; eval $$cmd;; \
1286                 *) $(do_file) ;; \
1287             esac; \
1288         done
1289
1290 installperms-data:
1291         @installperms="$(INSTALLPERMS_data)"; \
1292         dest=; chown=; chmod=; \
1293         for cmd in $$installperms; do \
1294             case "$$cmd" in \
1295                 chown=amanda) \
1296                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1297                 dest=*|chown=*|chmod=*) \
1298                         echo "  ($$cmd)"; eval $$cmd;; \
1299                 *)  $(do_file) ;; \
1300             esac; \
1301         done
1302
1303 install-exec-hook: installperms-exec
1304 install-data-hook: installperms-data
1305
1306 # define a rule to initialize the installperms manifest file
1307 @WANT_INSTALLPERMS_TRUE@installperms-init:
1308 @WANT_INSTALLPERMS_FALSE@installperms-init:
1309 @WANT_INSTALLPERMS_FALSE@       rm -f "$(installperms_sh)"
1310
1311 # A rule to make precompiler output from C files.  This is not used during
1312 # ordinary builds, but but can very useful in debugging problems on strange
1313 # architectures.  With this rule, we can ask users to 'make foo.i' and send
1314 # the result to us.
1315 #
1316 # It touches some automake internals ($COMPILE), but since it's not
1317 # build-critical, that's OK.
1318 %.i : %.c
1319         $(COMPILE) -E -o $@ $<
1320
1321 # so that uscan.c is never generated before uparse.h
1322 # otherwise we might have makedepend problems
1323 uscan.c: uparse.h
1324
1325 # these two commands are specially defined to omit $(AMANDA_WARNING_CFLAGS)
1326 # since we don't want warnings for generated code
1327 uscan.$(OBJEXT): uscan.c ../common-src/amanda.h uparse.h
1328         $(CC) $(CFLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -c $<
1329
1330 uparse.$(OBJEXT): uparse.c ../common-src/amanda.h amrecover.h
1331         $(CC) $(CFLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -c $<
1332
1333 lint:
1334         @f="$(amrecover_CSRC)";                                                 \
1335         (cd ../common-src; make listlibsrc);                                    \
1336         f="$$f "`cat ../common-src/listlibsrc.output`;                          \
1337         (cd ../server-src; make listlibsrc);                                    \
1338         f="$$f "`cat ../server-src/listlibsrc.output`;                          \
1339         echo $(LINT) $$f;                                                       \
1340         $(LINT) $(LINTFLAGS) $(CPPFLAGS) $(DEFS) -I. -I$(top_builddir)/config $(INCLUDES) $$f;\
1341         if [ $$? -ne 0 ]; then                                                  \
1342             exit 1;                                                             \
1343         fi;                                                                     \
1344         exit 0
1345
1346 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1347 # Otherwise a system limit (for SysV at least) may be exceeded.
1348 .NOEXPORT: