git.gag.com Git - debian/amanda/blob - oldrecover-src/Makefile.in

   1 # Makefile.in generated by automake 1.10.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # Makefile for Amanda file recovery programs.
  18
  19 # vim:ft=automake
  20 # Copyright (c) 2005-2008 Zmanda Inc.  All Rights Reserved.
  21 #
  22 # This library is free software; you can redistribute it and/or modify it
  23 # under the terms of the GNU Lesser General Public License version 2.1 as
  24 # published by the Free Software Foundation.
  25 #
  26 # This library is distributed in the hope that it will be useful, but
  27 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  28 # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
  29 # License for more details.
  30 #
  31 # You should have received a copy of the GNU Lesser General Public License
  32 # along with this library; if not, write to the Free Software Foundation,
  33 # Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA.
  34 #
  35 # Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
  36 # Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
  37
  38 # simple include file to pre-define variables which are then +='d by other
  39 # scripts in this directory.
  40
  41 # vim:ft=automake
  42 #
  43 # Adjust post-install permissions settings.  This rule works off two
  44 # specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
  45 # Each is a whitespace-separated list of commands, all of which are either
  46 # a variable assignment or a filename.  Three variables are available:
  47 #
  48 #  - dest= sets the destination directory to e.g., $(sbindir)
  49 #  - chown= controls changes in ownership; value is first argument to chown
  50 #  - chmod= controls changes in permissions; value is first argument to chmod
  51 #
  52 # As a special case, chown=amanda is taken as equivalent to
  53 # chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
  54 # whitespace in the user/group names.
  55 #
  56 # when a filename is seen, the currently active variables are applied.
  57 #
  58 # Note that scripts are data, not executables!
  59 #
  60 # EXAMPLE
  61 #
  62 # sbin_PROGRAMS = foo bar bing
  63 # libexec_PROGRAMS = pro gram
  64 # sbin_SCRIPTS = sk ript
  65 # INSTALLPERMS_exec = \
  66 #       dest=$(sbindir) chown=amanda chmod= \
  67 #               foo bar \
  68 #       chmod=07450 \
  69 #               bing
  70 #       dest=$(libexecdir) chmod= \
  71 #               $(libexec_PROGRAMS)
  72 # INSTALLPERMS_data = \
  73 #       dest=$(sbindir) chown=amanda chmod= \
  74 #               $(sbin_SCRIPTS)
  75 #
  76 # This whole operation is not required when making builds for packaging,
  77 # and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
  78 # AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
  79 # build directory is populated with a format suitable for shell interpretation,
  80 # with lines like this:
  81 #   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
  82 # the arguments being, respectively, owner:group, mode, and filename.  There will
  83 # be exactly one line for each file which has specific permissions.  The intention
  84 # is that this file be used by packaging scripts to set correct permissions at install
  85 # time.  Note that files which have no special permissions requirements do not appear
  86 # in this file at all, due to limitations of Automake.
  87
  88 # vim:ft=automake
  89
  90
  91 VPATH = @srcdir@
  92 pkgdatadir = $(datadir)/@PACKAGE@
  93 pkglibdir = $(libdir)/@PACKAGE@
  94 pkgincludedir = $(includedir)/@PACKAGE@
  95 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  96 install_sh_DATA = $(install_sh) -c -m 644
  97 install_sh_PROGRAM = $(install_sh) -c
  98 install_sh_SCRIPT = $(install_sh) -c
  99 INSTALL_HEADER = $(INSTALL_DATA)
 100 transform = $(program_transform_name)
 101 NORMAL_INSTALL = :
 102 PRE_INSTALL = :
 103 POST_INSTALL = :
 104 NORMAL_UNINSTALL = :
 105 PRE_UNINSTALL = :
 106 POST_UNINSTALL = :
 107 build_triplet = @build@
 108 host_triplet = @host@
 109 target_triplet = @target@
 110 DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
 111         $(srcdir)/Makefile.in \
 112         $(top_srcdir)/config/automake/installperms.am \
 113         $(top_srcdir)/config/automake/precompile.am \
 114         $(top_srcdir)/config/automake/vars.am uparse.c uparse.h \
 115         uscan.c
 116 @WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
 117 sbin_PROGRAMS = amoldrecover$(EXEEXT)
 118 subdir = oldrecover-src
 119 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 120 am__aclocal_m4_deps =  \
 121         $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
 122         $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
 123         $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
 124         $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
 125         $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
 126         $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
 127         $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
 128         $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
 129         $(top_srcdir)/config/macro-archive/xsltproc.m4 \
 130         $(top_srcdir)/config/amanda/amplot.m4 \
 131         $(top_srcdir)/config/amanda/bsd-security.m4 \
 132         $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
 133         $(top_srcdir)/config/amanda/bsdudp-security.m4 \
 134         $(top_srcdir)/config/amanda/changer.m4 \
 135         $(top_srcdir)/config/amanda/components.m4 \
 136         $(top_srcdir)/config/amanda/compress.m4 \
 137         $(top_srcdir)/config/amanda/config.m4 \
 138         $(top_srcdir)/config/amanda/debugging.m4 \
 139         $(top_srcdir)/config/amanda/defaults.m4 \
 140         $(top_srcdir)/config/amanda/devprefix.m4 \
 141         $(top_srcdir)/config/amanda/dirs.m4 \
 142         $(top_srcdir)/config/amanda/documentation.m4 \
 143         $(top_srcdir)/config/amanda/dumpers.m4 \
 144         $(top_srcdir)/config/amanda/flags.m4 \
 145         $(top_srcdir)/config/amanda/flock.m4 \
 146         $(top_srcdir)/config/amanda/funcs.m4 \
 147         $(top_srcdir)/config/amanda/getfsent.m4 \
 148         $(top_srcdir)/config/amanda/i18n.m4 \
 149         $(top_srcdir)/config/amanda/ipv6.m4 \
 150         $(top_srcdir)/config/amanda/krb4-security.m4 \
 151         $(top_srcdir)/config/amanda/krb5-security.m4 \
 152         $(top_srcdir)/config/amanda/lfs.m4 \
 153         $(top_srcdir)/config/amanda/libs.m4 \
 154         $(top_srcdir)/config/amanda/net.m4 \
 155         $(top_srcdir)/config/amanda/progs.m4 \
 156         $(top_srcdir)/config/amanda/ps.m4 \
 157         $(top_srcdir)/config/amanda/readdir.m4 \
 158         $(top_srcdir)/config/amanda/readline.m4 \
 159         $(top_srcdir)/config/amanda/rsh-security.m4 \
 160         $(top_srcdir)/config/amanda/s3-device.m4 \
 161         $(top_srcdir)/config/amanda/shmem.m4 \
 162         $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
 163         $(top_srcdir)/config/amanda/ssh-security.m4 \
 164         $(top_srcdir)/config/amanda/summary.m4 \
 165         $(top_srcdir)/config/amanda/swig.m4 \
 166         $(top_srcdir)/config/amanda/syshacks.m4 \
 167         $(top_srcdir)/config/amanda/tape.m4 \
 168         $(top_srcdir)/config/amanda/types.m4 \
 169         $(top_srcdir)/config/amanda/userid.m4 \
 170         $(top_srcdir)/config/amanda/version.m4 \
 171         $(top_srcdir)/config/gnulib/alloca.m4 \
 172         $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
 173         $(top_srcdir)/config/gnulib/base64.m4 \
 174         $(top_srcdir)/config/gnulib/eoverflow.m4 \
 175         $(top_srcdir)/config/gnulib/extensions.m4 \
 176         $(top_srcdir)/config/gnulib/float_h.m4 \
 177         $(top_srcdir)/config/gnulib/fsusage.m4 \
 178         $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
 179         $(top_srcdir)/config/gnulib/getopt.m4 \
 180         $(top_srcdir)/config/gnulib/gettimeofday.m4 \
 181         $(top_srcdir)/config/gnulib/gnulib-common.m4 \
 182         $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
 183         $(top_srcdir)/config/gnulib/include_next.m4 \
 184         $(top_srcdir)/config/gnulib/inet_ntop.m4 \
 185         $(top_srcdir)/config/gnulib/intmax_t.m4 \
 186         $(top_srcdir)/config/gnulib/lock.m4 \
 187         $(top_srcdir)/config/gnulib/longlong.m4 \
 188         $(top_srcdir)/config/gnulib/malloc.m4 \
 189         $(top_srcdir)/config/gnulib/mkdtemp.m4 \
 190         $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
 191         $(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
 192         $(top_srcdir)/config/gnulib/physmem.m4 \
 193         $(top_srcdir)/config/gnulib/safe-read.m4 \
 194         $(top_srcdir)/config/gnulib/safe-write.m4 \
 195         $(top_srcdir)/config/gnulib/snprintf.m4 \
 196         $(top_srcdir)/config/gnulib/socklen.m4 \
 197         $(top_srcdir)/config/gnulib/sockpfaf.m4 \
 198         $(top_srcdir)/config/gnulib/ssize_t.m4 \
 199         $(top_srcdir)/config/gnulib/stdbool.m4 \
 200         $(top_srcdir)/config/gnulib/stdint.m4 \
 201         $(top_srcdir)/config/gnulib/stdio_h.m4 \
 202         $(top_srcdir)/config/gnulib/stdlib_h.m4 \
 203         $(top_srcdir)/config/gnulib/strdup.m4 \
 204         $(top_srcdir)/config/gnulib/string_h.m4 \
 205         $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
 206         $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
 207         $(top_srcdir)/config/gnulib/sys_time_h.m4 \
 208         $(top_srcdir)/config/gnulib/tempname.m4 \
 209         $(top_srcdir)/config/gnulib/unistd_h.m4 \
 210         $(top_srcdir)/config/gnulib/vasnprintf.m4 \
 211         $(top_srcdir)/config/gnulib/visibility.m4 \
 212         $(top_srcdir)/config/gnulib/wchar.m4 \
 213         $(top_srcdir)/config/gettext-macros/gettext.m4 \
 214         $(top_srcdir)/config/gettext-macros/iconv.m4 \
 215         $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
 216         $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
 217         $(top_srcdir)/config/gettext-macros/lib-link.m4 \
 218         $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
 219         $(top_srcdir)/config/gettext-macros/nls.m4 \
 220         $(top_srcdir)/config/gettext-macros/po.m4 \
 221         $(top_srcdir)/config/gettext-macros/progtest.m4 \
 222         $(top_srcdir)/config/gettext-macros/size_max.m4 \
 223         $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
 224         $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
 225         $(top_srcdir)/config/gettext-macros/wint_t.m4 \
 226         $(top_srcdir)/config/gettext-macros/xsize.m4 \
 227         $(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
 228 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 229         $(ACLOCAL_M4)
 230 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
 231 CONFIG_HEADER = $(top_builddir)/config/config.h
 232 CONFIG_CLEAN_FILES =
 233 am__installdirs = "$(DESTDIR)$(sbindir)"
 234 sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 235 PROGRAMS = $(sbin_PROGRAMS)
 236 am__objects_1 = amrecover.$(OBJEXT) display_commands.$(OBJEXT) \
 237         extract_list.$(OBJEXT) help.$(OBJEXT) set_commands.$(OBJEXT)
 238 am_amoldrecover_OBJECTS = $(am__objects_1) uparse.$(OBJEXT) \
 239         uscan.$(OBJEXT)
 240 amoldrecover_OBJECTS = $(am_amoldrecover_OBJECTS)
 241 amoldrecover_LDADD = $(LDADD)
 242 am__DEPENDENCIES_1 =
 243 amoldrecover_DEPENDENCIES = ../common-src/libamanda.$(LIB_EXTENSION) \
 244         $(am__DEPENDENCIES_1) \
 245         ../client-src/libamclient.$(LIB_EXTENSION) \
 246         ../common-src/libamanda.$(LIB_EXTENSION)
 247 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config
 248 depcomp = $(SHELL) $(top_srcdir)/config/depcomp
 249 am__depfiles_maybe = depfiles
 250 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 251         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 252 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 253         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 254         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 255 CCLD = $(CC)
 256 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 257         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 258         $(LDFLAGS) -o $@
 259 LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
 260 LTLEXCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 261         --mode=compile $(LEX) $(LFLAGS) $(AM_LFLAGS)
 262 YLWRAP = $(top_srcdir)/config/ylwrap
 263 YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
 264 LTYACCCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 265         --mode=compile $(YACC) $(YFLAGS) $(AM_YFLAGS)
 266 SOURCES = $(amoldrecover_SOURCES)
 267 DIST_SOURCES = $(amoldrecover_SOURCES)
 268 HEADERS = $(noinst_HEADERS)
 269 ETAGS = etags
 270 CTAGS = ctags
 271 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 272 ACLOCAL = @ACLOCAL@
 273 AIX_BACKUP = @AIX_BACKUP@
 274 ALLOCA = @ALLOCA@
 275 ALLOCA_H = @ALLOCA_H@
 276 AMANDA_DBGDIR = @AMANDA_DBGDIR@
 277 AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
 278 AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
 279 AMANDA_TMPDIR = @AMANDA_TMPDIR@
 280 AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
 281 AMLINT = @AMLINT@
 282 AMLINTFLAGS = @AMLINTFLAGS@
 283 AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
 284 AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
 285 AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
 286 AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
 287 AMTAR = @AMTAR@
 288 APPLICATION_DIR = @APPLICATION_DIR@
 289 AR = @AR@
 290 ARPA_INET_H = @ARPA_INET_H@
 291 ASSERTIONS = @ASSERTIONS@
 292 AUTOCONF = @AUTOCONF@
 293 AUTOHEADER = @AUTOHEADER@
 294 AUTOMAKE = @AUTOMAKE@
 295 AWK = @AWK@
 296 BASH = @BASH@
 297 BINARY_OWNER = @BINARY_OWNER@
 298 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
 299 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
 300 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
 301 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
 302 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 303 BSDTCP_SECURITY = @BSDTCP_SECURITY@
 304 BSDUDP_SECURITY = @BSDUDP_SECURITY@
 305 BSD_SECURITY = @BSD_SECURITY@
 306 CAT = @CAT@
 307 CC = @CC@
 308 CCDEPMODE = @CCDEPMODE@
 309 CFLAGS = @CFLAGS@
 310 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 311 CHECK_USERID = @CHECK_USERID@
 312 CHIO = @CHIO@
 313 CHS = @CHS@
 314 CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
 315 CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
 316 CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
 317 CLIENT_LOGIN = @CLIENT_LOGIN@
 318 CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
 319 COMPRESS = @COMPRESS@
 320 COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
 321 COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
 322 COMPRESS_PATH = @COMPRESS_PATH@
 323 COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
 324 CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
 325 CONFIG_DIR = @CONFIG_DIR@
 326 CPP = @CPP@
 327 CPPFLAGS = @CPPFLAGS@
 328 CURL_CONFIG = @CURL_CONFIG@
 329 CXX = @CXX@
 330 CXXCPP = @CXXCPP@
 331 CXXDEPMODE = @CXXDEPMODE@
 332 CXXFLAGS = @CXXFLAGS@
 333 CYGPATH_W = @CYGPATH_W@
 334 DD = @DD@
 335 DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
 336 DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
 337 DEFAULT_CONFIG = @DEFAULT_CONFIG@
 338 DEFAULT_MAILER = @DEFAULT_MAILER@
 339 DEFAULT_SERVER = @DEFAULT_SERVER@
 340 DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
 341 DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
 342 DEFS = @DEFS@
 343 DEPDIR = @DEPDIR@
 344 DOC_BUILD_DATE = @DOC_BUILD_DATE@
 345 DUMP = @DUMP@
 346 DUMP_RETURNS_1 = @DUMP_RETURNS_1@
 347 ECHO = @ECHO@
 348 ECHO_C = @ECHO_C@
 349 ECHO_N = @ECHO_N@
 350 ECHO_T = @ECHO_T@
 351 EGREP = @EGREP@
 352 EOVERFLOW = @EOVERFLOW@
 353 EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
 354 EXEEXT = @EXEEXT@
 355 F77 = @F77@
 356 FFLAGS = @FFLAGS@
 357 FLOAT_H = @FLOAT_H@
 358 GETCONF = @GETCONF@
 359 GETOPT_H = @GETOPT_H@
 360 GETTEXT = @GETTEXT@
 361 GLIB_CFLAGS = @GLIB_CFLAGS@
 362 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
 363 GLIB_LIBS = @GLIB_LIBS@
 364 GLIB_MKENUMS = @GLIB_MKENUMS@
 365 GMSGFMT = @GMSGFMT@
 366 GMSGFMT_015 = @GMSGFMT_015@
 367 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
 368 GNULIB_CHOWN = @GNULIB_CHOWN@
 369 GNULIB_DUP2 = @GNULIB_DUP2@
 370 GNULIB_ENVIRON = @GNULIB_ENVIRON@
 371 GNULIB_FCHDIR = @GNULIB_FCHDIR@
 372 GNULIB_FFLUSH = @GNULIB_FFLUSH@
 373 GNULIB_FOPEN = @GNULIB_FOPEN@
 374 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
 375 GNULIB_FREOPEN = @GNULIB_FREOPEN@
 376 GNULIB_FSEEK = @GNULIB_FSEEK@
 377 GNULIB_FSEEKO = @GNULIB_FSEEKO@
 378 GNULIB_FTELL = @GNULIB_FTELL@
 379 GNULIB_FTELLO = @GNULIB_FTELLO@
 380 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
 381 GNULIB_GETCWD = @GNULIB_GETCWD@
 382 GNULIB_GETDELIM = @GNULIB_GETDELIM@
 383 GNULIB_GETLINE = @GNULIB_GETLINE@
 384 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
 385 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
 386 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
 387 GNULIB_LCHOWN = @GNULIB_LCHOWN@
 388 GNULIB_LSEEK = @GNULIB_LSEEK@
 389 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
 390 GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
 391 GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
 392 GNULIB_MBSCHR = @GNULIB_MBSCHR@
 393 GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
 394 GNULIB_MBSLEN = @GNULIB_MBSLEN@
 395 GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
 396 GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
 397 GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
 398 GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
 399 GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
 400 GNULIB_MBSSEP = @GNULIB_MBSSEP@
 401 GNULIB_MBSSPN = @GNULIB_MBSSPN@
 402 GNULIB_MBSSTR = @GNULIB_MBSSTR@
 403 GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
 404 GNULIB_MEMMEM = @GNULIB_MEMMEM@
 405 GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
 406 GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
 407 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
 408 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
 409 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
 410 GNULIB_PUTENV = @GNULIB_PUTENV@
 411 GNULIB_READLINK = @GNULIB_READLINK@
 412 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
 413 GNULIB_SETENV = @GNULIB_SETENV@
 414 GNULIB_SLEEP = @GNULIB_SLEEP@
 415 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
 416 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
 417 GNULIB_STPCPY = @GNULIB_STPCPY@
 418 GNULIB_STPNCPY = @GNULIB_STPNCPY@
 419 GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
 420 GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
 421 GNULIB_STRDUP = @GNULIB_STRDUP@
 422 GNULIB_STRERROR = @GNULIB_STRERROR@
 423 GNULIB_STRNDUP = @GNULIB_STRNDUP@
 424 GNULIB_STRNLEN = @GNULIB_STRNLEN@
 425 GNULIB_STRPBRK = @GNULIB_STRPBRK@
 426 GNULIB_STRSEP = @GNULIB_STRSEP@
 427 GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
 428 GNULIB_STRSTR = @GNULIB_STRSTR@
 429 GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
 430 GNULIB_UNSETENV = @GNULIB_UNSETENV@
 431 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
 432 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
 433 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
 434 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
 435 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
 436 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
 437 GNUPLOT = @GNUPLOT@
 438 GNUTAR = @GNUTAR@
 439 GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
 440 GOBJECT_QUERY = @GOBJECT_QUERY@
 441 GREP = @GREP@
 442 GZIP = @GZIP@
 443 HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
 444 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
 445 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
 446 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
 447 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
 448 HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
 449 HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
 450 HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
 451 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
 452 HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
 453 HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
 454 HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
 455 HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
 456 HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
 457 HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
 458 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
 459 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
 460 HAVE_DUP2 = @HAVE_DUP2@
 461 HAVE_FSEEKO = @HAVE_FSEEKO@
 462 HAVE_FTELLO = @HAVE_FTELLO@
 463 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
 464 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
 465 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
 466 HAVE_GZIP = @HAVE_GZIP@
 467 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
 468 HAVE_IO_H = @HAVE_IO_H@
 469 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
 470 HAVE_LSTAT = @HAVE_LSTAT@
 471 HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
 472 HAVE_MEMPCPY = @HAVE_MEMPCPY@
 473 HAVE_MKDTEMP = @HAVE_MKDTEMP@
 474 HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
 475 HAVE_OS_H = @HAVE_OS_H@
 476 HAVE_READLINK = @HAVE_READLINK@
 477 HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
 478 HAVE_SETENV = @HAVE_SETENV@
 479 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
 480 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
 481 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
 482 HAVE_SLEEP = @HAVE_SLEEP@
 483 HAVE_STDINT_H = @HAVE_STDINT_H@
 484 HAVE_STPCPY = @HAVE_STPCPY@
 485 HAVE_STPNCPY = @HAVE_STPNCPY@
 486 HAVE_STRCASESTR = @HAVE_STRCASESTR@
 487 HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
 488 HAVE_STRNDUP = @HAVE_STRNDUP@
 489 HAVE_STRPBRK = @HAVE_STRPBRK@
 490 HAVE_STRSEP = @HAVE_STRSEP@
 491 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
 492 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
 493 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
 494 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
 495 HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
 496 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
 497 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
 498 HAVE_UNISTD_H = @HAVE_UNISTD_H@
 499 HAVE_UNSETENV = @HAVE_UNSETENV@
 500 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
 501 HAVE_VASPRINTF = @HAVE_VASPRINTF@
 502 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 503 HAVE_WCHAR_H = @HAVE_WCHAR_H@
 504 HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
 505 HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
 506 HAVE__BOOL = @HAVE__BOOL@
 507 INCLUDE_NEXT = @INCLUDE_NEXT@
 508 INSTALL = @INSTALL@
 509 INSTALL_DATA = @INSTALL_DATA@
 510 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 511 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 512 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 513 INTLLIBS = @INTLLIBS@
 514 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 515 KRB4_SECURITY = @KRB4_SECURITY@
 516 KRB5_SECURITY = @KRB5_SECURITY@
 517 LDFLAGS = @LDFLAGS@
 518 LEX = @LEX@
 519 LEXLIB = @LEXLIB@
 520 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 521 LIBCURL = @LIBCURL@
 522 LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
 523 LIBICONV = @LIBICONV@
 524 LIBINTL = @LIBINTL@
 525 LIBMULTITHREAD = @LIBMULTITHREAD@
 526 LIBOBJS = @LIBOBJS@
 527 LIBPTH = @LIBPTH@
 528 LIBS = @LIBS@
 529 LIBTHREAD = @LIBTHREAD@
 530 LIBTOOL = @LIBTOOL@
 531 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 532 LN_S = @LN_S@
 533 LOCKING = @LOCKING@
 534 LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
 535 LTLIBICONV = @LTLIBICONV@
 536 LTLIBINTL = @LTLIBINTL@
 537 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
 538 LTLIBOBJS = @LTLIBOBJS@
 539 LTLIBPTH = @LTLIBPTH@
 540 LTLIBTHREAD = @LTLIBTHREAD@
 541 MAILER = @MAILER@
 542 MAKEINFO = @MAKEINFO@
 543 MCUTIL = @MCUTIL@
 544 MKDIR_P = @MKDIR_P@
 545 MSGFMT = @MSGFMT@
 546 MSGFMT_015 = @MSGFMT_015@
 547 MSGMERGE = @MSGMERGE@
 548 MT = @MT@
 549 MTX = @MTX@
 550 MT_FILE_FLAG = @MT_FILE_FLAG@
 551 NETINET_IN_H = @NETINET_IN_H@
 552 NEXT_FLOAT_H = @NEXT_FLOAT_H@
 553 NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
 554 NEXT_STDINT_H = @NEXT_STDINT_H@
 555 NEXT_STDIO_H = @NEXT_STDIO_H@
 556 NEXT_STDLIB_H = @NEXT_STDLIB_H@
 557 NEXT_STRING_H = @NEXT_STRING_H@
 558 NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
 559 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
 560 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
 561 NEXT_UNISTD_H = @NEXT_UNISTD_H@
 562 NEXT_WCHAR_H = @NEXT_WCHAR_H@
 563 OBJEXT = @OBJEXT@
 564 PACKAGE = @PACKAGE@
 565 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 566 PACKAGE_NAME = @PACKAGE_NAME@
 567 PACKAGE_STRING = @PACKAGE_STRING@
 568 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 569 PACKAGE_VERSION = @PACKAGE_VERSION@
 570 PATH_SEPARATOR = @PATH_SEPARATOR@
 571 PCAT = @PCAT@
 572 PERL = @PERL@
 573 PERLEXTLIBS = @PERLEXTLIBS@
 574 PERL_INC = @PERL_INC@
 575 PKG_CONFIG = @PKG_CONFIG@
 576 POSUB = @POSUB@
 577 PRINT = @PRINT@
 578 PS = @PS@
 579 PS_ARGUMENT = @PS_ARGUMENT@
 580 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
 581 RANLIB = @RANLIB@
 582 READLINE_LIBS = @READLINE_LIBS@
 583 REPLACE_CHOWN = @REPLACE_CHOWN@
 584 REPLACE_FCHDIR = @REPLACE_FCHDIR@
 585 REPLACE_FFLUSH = @REPLACE_FFLUSH@
 586 REPLACE_FOPEN = @REPLACE_FOPEN@
 587 REPLACE_FPRINTF = @REPLACE_FPRINTF@
 588 REPLACE_FREOPEN = @REPLACE_FREOPEN@
 589 REPLACE_FSEEK = @REPLACE_FSEEK@
 590 REPLACE_FSEEKO = @REPLACE_FSEEKO@
 591 REPLACE_FTELL = @REPLACE_FTELL@
 592 REPLACE_FTELLO = @REPLACE_FTELLO@
 593 REPLACE_GETCWD = @REPLACE_GETCWD@
 594 REPLACE_GETLINE = @REPLACE_GETLINE@
 595 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
 596 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
 597 REPLACE_LCHOWN = @REPLACE_LCHOWN@
 598 REPLACE_LSEEK = @REPLACE_LSEEK@
 599 REPLACE_MEMMEM = @REPLACE_MEMMEM@
 600 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
 601 REPLACE_PRINTF = @REPLACE_PRINTF@
 602 REPLACE_PUTENV = @REPLACE_PUTENV@
 603 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
 604 REPLACE_SPRINTF = @REPLACE_SPRINTF@
 605 REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
 606 REPLACE_STRERROR = @REPLACE_STRERROR@
 607 REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
 608 REPLACE_STRSTR = @REPLACE_STRSTR@
 609 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
 610 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
 611 REPLACE_VPRINTF = @REPLACE_VPRINTF@
 612 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
 613 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
 614 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
 615 RESTORE = @RESTORE@
 616 RSH_SECURITY = @RSH_SECURITY@
 617 SAMBA_CLIENT = @SAMBA_CLIENT@
 618 SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
 619 SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
 620 SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
 621 SERVICE_SUFFIX = @SERVICE_SUFFIX@
 622 SETUID_GROUP = @SETUID_GROUP@
 623 SET_MAKE = @SET_MAKE@
 624 SHELL = @SHELL@
 625 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
 626 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
 627 SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
 628 SORT = @SORT@
 629 SSH = @SSH@
 630 SSH_SECURITY = @SSH_SECURITY@
 631 STDBOOL_H = @STDBOOL_H@
 632 STDINT_H = @STDINT_H@
 633 STRIP = @STRIP@
 634 SVN = @SVN@
 635 SWIG = @SWIG@
 636 SWIG_LIB = @SWIG_LIB@
 637 SYS_SOCKET_H = @SYS_SOCKET_H@
 638 SYS_STAT_H = @SYS_STAT_H@
 639 SYS_TIME_H = @SYS_TIME_H@
 640 TCPPORTRANGE = @TCPPORTRANGE@
 641 TICKET_LIFETIME = @TICKET_LIFETIME@
 642 UDPPORTRANGE = @UDPPORTRANGE@
 643 UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
 644 UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
 645 USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
 646 USE_NLS = @USE_NLS@
 647 USE_RUNDUMP = @USE_RUNDUMP@
 648 USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
 649 VDUMP = @VDUMP@
 650 VERSION = @VERSION@
 651 VERSION_COMMENT = @VERSION_COMMENT@
 652 VERSION_MAJOR = @VERSION_MAJOR@
 653 VERSION_MINOR = @VERSION_MINOR@
 654 VERSION_PATCH = @VERSION_PATCH@
 655 VERSION_SUFFIX = @VERSION_SUFFIX@
 656 VOID_UNSETENV = @VOID_UNSETENV@
 657 VRESTORE = @VRESTORE@
 658 VXDUMP = @VXDUMP@
 659 VXRESTORE = @VXRESTORE@
 660 WCHAR_H = @WCHAR_H@
 661 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
 662 WINT_T_SUFFIX = @WINT_T_SUFFIX@
 663 XFSDUMP = @XFSDUMP@
 664 XFSRESTORE = @XFSRESTORE@
 665 XGETTEXT = @XGETTEXT@
 666 XGETTEXT_015 = @XGETTEXT_015@
 667 XSLREL = @XSLREL@
 668 XSLTPROC = @XSLTPROC@
 669 XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
 670 YACC = @YACC@
 671 YFLAGS = @YFLAGS@
 672 _libcurl_config = @_libcurl_config@
 673 abs_builddir = @abs_builddir@
 674 abs_srcdir = @abs_srcdir@
 675 abs_top_builddir = @abs_top_builddir@
 676 abs_top_srcdir = @abs_top_srcdir@
 677 ac_ct_CC = @ac_ct_CC@
 678 ac_ct_CXX = @ac_ct_CXX@
 679 ac_ct_F77 = @ac_ct_F77@
 680 am__include = @am__include@
 681 am__leading_dot = @am__leading_dot@
 682 am__quote = @am__quote@
 683 am__tar = @am__tar@
 684 am__untar = @am__untar@
 685 amdatadir = @amdatadir@
 686 amincludedir = @amincludedir@
 687 amlibdir = @amlibdir@
 688 amlibexecdir = @amlibexecdir@
 689 amperldir = @amperldir@
 690 bindir = @bindir@
 691 build = @build@
 692 build_alias = @build_alias@
 693 build_cpu = @build_cpu@
 694 build_os = @build_os@
 695 build_vendor = @build_vendor@
 696 builddir = @builddir@
 697 datadir = @datadir@
 698 datarootdir = @datarootdir@
 699 docdir = @docdir@
 700 dvidir = @dvidir@
 701 exec_prefix = @exec_prefix@
 702 gl_LIBOBJS = @gl_LIBOBJS@
 703 gl_LTLIBOBJS = @gl_LTLIBOBJS@
 704 gltests_LIBOBJS = @gltests_LIBOBJS@
 705 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
 706 host = @host@
 707 host_alias = @host_alias@
 708 host_cpu = @host_cpu@
 709 host_os = @host_os@
 710 host_vendor = @host_vendor@
 711 htmldir = @htmldir@
 712 includedir = @includedir@
 713 infodir = @infodir@
 714 install_sh = @install_sh@
 715 libdir = @libdir@
 716 libexecdir = @libexecdir@
 717 localedir = @localedir@
 718 localstatedir = @localstatedir@
 719 mandir = @mandir@
 720 mkdir_p = @mkdir_p@
 721 oldincludedir = @oldincludedir@
 722 pdfdir = @pdfdir@
 723 prefix = @prefix@
 724 program_transform_name = @program_transform_name@
 725 psdir = @psdir@
 726 sbindir = @sbindir@
 727 sharedstatedir = @sharedstatedir@
 728 srcdir = @srcdir@
 729 sysconfdir = @sysconfdir@
 730 target = @target@
 731 target_alias = @target_alias@
 732 target_cpu = @target_cpu@
 733 target_os = @target_os@
 734 target_vendor = @target_vendor@
 735 top_build_prefix = @top_build_prefix@
 736 top_builddir = @top_builddir@
 737 top_srcdir = @top_srcdir@
 738 SUFFIXES =
 739 EXTRA_DIST =
 740 BUILT_SOURCES =
 741 MOSTLYCLEANFILES =
 742 CLEANFILES =
 743 DISTCLEANFILES = $(am__append_1)
 744 MAINTAINERCLEANFILES =
 745
 746 # sed expression to strip leading directories from a filename; this converts e.g.,
 747 # src/foo/bar.so to bar.so.
 748 strip_leading_dirs = s|^.*/||
 749 @WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 750 @WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
 751
 752
 753 # define a snippet of the scripts below to either perform a chown/chmod operation,
 754 # or record that operation in the logfile.  On entry to the snippet, $$dest is the
 755 # destination directory, $$cmd is the srcdir-relative pathname of the target file,
 756 # $$chown is the ownership, and $$chmod is the permission pattern.
 757 @WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 758 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
 759 @WANT_INSTALLPERMS_TRUE@        echo chown "$$chown" "$$pa"; \
 760 @WANT_INSTALLPERMS_TRUE@        chown "$$chown" "$$pa" || exit 1; \
 761 @WANT_INSTALLPERMS_TRUE@    fi; \
 762 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
 763 @WANT_INSTALLPERMS_TRUE@        echo chmod "$$chmod" "$$pa"; \
 764 @WANT_INSTALLPERMS_TRUE@        chmod "$$chmod" "$$pa" || exit 1; \
 765 @WANT_INSTALLPERMS_TRUE@    fi
 766
 767 @WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
 768 INCLUDES = -I$(top_builddir)/common-src \
 769                 -I$(top_srcdir)/common-src   \
 770                 -I$(top_srcdir)/client-src   \
 771                 -I$(top_srcdir)/gnulib
 772
 773 AM_CFLAGS = $(AMANDA_WARNING_CFLAGS)
 774 AM_LDFLAGS = $(AMANDA_STATIC_LDFLAGS)
 775 LINT = $(AMLINT)
 776 LINTFLAGS = $(AMLINTFLAGS)
 777 LIB_EXTENSION = la
 778
 779 ###
 780 # Because libamanda includes routines (e.g. regex) provided by some system
 781 # libraries, and because of the way libtool sets up the command line, we
 782 # need to list libamanda twice here, first to override the system library
 783 # routines, and second to pick up any references in the other libraries.
 784 ###
 785 LDADD = ../common-src/libamanda.$(LIB_EXTENSION) \
 786         @LEXLIB@ \
 787         $(READLINE_LIBS) \
 788         ../client-src/libamclient.$(LIB_EXTENSION) \
 789         ../common-src/libamanda.$(LIB_EXTENSION)
 790
 791 amoldrecover_CSRC = amrecover.c                                 \
 792                         display_commands.c              extract_list.c  \
 793                         help.c                          set_commands.c
 794
 795 amoldrecover_SOURCES = $(amoldrecover_CSRC)     uparse.y        uscan.l
 796 noinst_HEADERS = amrecover.h uparse.h
 797 AM_YFLAGS = -d
 798 INSTALLPERMS_exec = \
 799         dest=$(sbindir) chown=amanda chmod=0750 $(sbin_PROGRAMS)
 800
 801 all: $(BUILT_SOURCES)
 802         $(MAKE) $(AM_MAKEFLAGS) all-am
 803
 804 .SUFFIXES:
 805 .SUFFIXES: .c .l .lo .o .obj .y
 806 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(top_srcdir)/config/automake/precompile.am $(am__configure_deps)
 807         @for dep in $?; do \
 808           case '$(am__configure_deps)' in \
 809             *$$dep*) \
 810               cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
 811                 && exit 0; \
 812               exit 1;; \
 813           esac; \
 814         done; \
 815         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  oldrecover-src/Makefile'; \
 816         cd $(top_srcdir) && \
 817           $(AUTOMAKE) --gnu  oldrecover-src/Makefile
 818 .PRECIOUS: Makefile
 819 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 820         @case '$?' in \
 821           *config.status*) \
 822             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 823           *) \
 824             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 825             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 826         esac;
 827
 828 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 829         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 830
 831 $(top_srcdir)/configure:  $(am__configure_deps)
 832         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 833 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 834         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 835 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 836         @$(NORMAL_INSTALL)
 837         test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
 838         @list='$(sbin_PROGRAMS)'; for p in $$list; do \
 839           p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
 840           if test -f $$p \
 841              || test -f $$p1 \
 842           ; then \
 843             f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
 844            echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
 845            $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
 846           else :; fi; \
 847         done
 848
 849 uninstall-sbinPROGRAMS:
 850         @$(NORMAL_UNINSTALL)
 851         @list='$(sbin_PROGRAMS)'; for p in $$list; do \
 852           f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
 853           echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
 854           rm -f "$(DESTDIR)$(sbindir)/$$f"; \
 855         done
 856
 857 clean-sbinPROGRAMS:
 858         @list='$(sbin_PROGRAMS)'; for p in $$list; do \
 859           f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
 860           echo " rm -f $$p $$f"; \
 861           rm -f $$p $$f ; \
 862         done
 863 uparse.h: uparse.c
 864         @if test ! -f $@; then \
 865           rm -f uparse.c; \
 866           $(MAKE) $(AM_MAKEFLAGS) uparse.c; \
 867         else :; fi
 868 amoldrecover$(EXEEXT): $(amoldrecover_OBJECTS) $(amoldrecover_DEPENDENCIES)
 869         @rm -f amoldrecover$(EXEEXT)
 870         $(LINK) $(amoldrecover_OBJECTS) $(amoldrecover_LDADD) $(LIBS)
 871
 872 mostlyclean-compile:
 873         -rm -f *.$(OBJEXT)
 874
 875 distclean-compile:
 876         -rm -f *.tab.c
 877
 878 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amrecover.Po@am__quote@
 879 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/display_commands.Po@am__quote@
 880 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extract_list.Po@am__quote@
 881 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/help.Po@am__quote@
 882 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set_commands.Po@am__quote@
 883 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uparse.Po@am__quote@
 884 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uscan.Po@am__quote@
 885
 886 .c.o:
 887 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 888 @am__fastdepCC_TRUE@    mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 889 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 890 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 891 @am__fastdepCC_FALSE@   $(COMPILE) -c $<
 892
 893 .c.obj:
 894 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 895 @am__fastdepCC_TRUE@    mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 896 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 897 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 898 @am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
 899
 900 .c.lo:
 901 @am__fastdepCC_TRUE@    $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 902 @am__fastdepCC_TRUE@    mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 903 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 904 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 905 @am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
 906
 907 .l.c:
 908         $(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE)
 909
 910 .y.c:
 911         $(am__skipyacc) $(SHELL) $(YLWRAP) $< y.tab.c $@ y.tab.h $*.h y.output $*.output -- $(YACCCOMPILE)
 912
 913 mostlyclean-libtool:
 914         -rm -f *.lo
 915
 916 clean-libtool:
 917         -rm -rf .libs _libs
 918
 919 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 920         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 921         unique=`for i in $$list; do \
 922             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 923           done | \
 924           $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
 925               END { if (nonempty) { for (i in files) print i; }; }'`; \
 926         mkid -fID $$unique
 927 tags: TAGS
 928
 929 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 930                 $(TAGS_FILES) $(LISP)
 931         tags=; \
 932         here=`pwd`; \
 933         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 934         unique=`for i in $$list; do \
 935             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 936           done | \
 937           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 938               END { if (nonempty) { for (i in files) print i; }; }'`; \
 939         if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 940           test -n "$$unique" || unique=$$empty_fix; \
 941           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 942             $$tags $$unique; \
 943         fi
 944 ctags: CTAGS
 945 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 946                 $(TAGS_FILES) $(LISP)
 947         tags=; \
 948         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 949         unique=`for i in $$list; do \
 950             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 951           done | \
 952           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 953               END { if (nonempty) { for (i in files) print i; }; }'`; \
 954         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 955           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 956              $$tags $$unique
 957
 958 GTAGS:
 959         here=`$(am__cd) $(top_builddir) && pwd` \
 960           && cd $(top_srcdir) \
 961           && gtags -i $(GTAGS_ARGS) $$here
 962
 963 distclean-tags:
 964         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 965
 966 distdir: $(DISTFILES)
 967         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 968         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 969         list='$(DISTFILES)'; \
 970           dist_files=`for file in $$list; do echo $$file; done | \
 971           sed -e "s|^$$srcdirstrip/||;t" \
 972               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 973         case $$dist_files in \
 974           */*) $(MKDIR_P) `echo "$$dist_files" | \
 975                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 976                            sort -u` ;; \
 977         esac; \
 978         for file in $$dist_files; do \
 979           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 980           if test -d $$d/$$file; then \
 981             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 982             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 983               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 984             fi; \
 985             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 986           else \
 987             test -f $(distdir)/$$file \
 988             || cp -p $$d/$$file $(distdir)/$$file \
 989             || exit 1; \
 990           fi; \
 991         done
 992 check-am: all-am
 993 check: $(BUILT_SOURCES)
 994         $(MAKE) $(AM_MAKEFLAGS) check-am
 995 all-am: Makefile $(PROGRAMS) $(HEADERS)
 996 installdirs:
 997         for dir in "$(DESTDIR)$(sbindir)"; do \
 998           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 999         done
1000 install: $(BUILT_SOURCES)
1001         $(MAKE) $(AM_MAKEFLAGS) install-am
1002 install-exec: install-exec-am
1003 install-data: install-data-am
1004 uninstall: uninstall-am
1005
1006 install-am: all-am
1007         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1008
1009 installcheck: installcheck-am
1010 install-strip:
1011         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1012           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1013           `test -z '$(STRIP)' || \
1014             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1015 mostlyclean-generic:
1016         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
1017
1018 clean-generic:
1019         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1020
1021 distclean-generic:
1022         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1023         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1024
1025 maintainer-clean-generic:
1026         @echo "This command is intended for maintainers to use"
1027         @echo "it deletes files that may require special tools to rebuild."
1028         -rm -f uparse.c
1029         -rm -f uparse.h
1030         -rm -f uscan.c
1031         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1032         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1033 clean: clean-am
1034
1035 clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \
1036         mostlyclean-am
1037
1038 distclean: distclean-am
1039         -rm -rf ./$(DEPDIR)
1040         -rm -f Makefile
1041 distclean-am: clean-am distclean-compile distclean-generic \
1042         distclean-tags
1043
1044 dvi: dvi-am
1045
1046 dvi-am:
1047
1048 html: html-am
1049
1050 info: info-am
1051
1052 info-am:
1053
1054 install-data-am:
1055         @$(NORMAL_INSTALL)
1056         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1057
1058 install-dvi: install-dvi-am
1059
1060 install-exec-am: install-sbinPROGRAMS
1061         @$(NORMAL_INSTALL)
1062         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1063
1064 install-html: install-html-am
1065
1066 install-info: install-info-am
1067
1068 install-man:
1069
1070 install-pdf: install-pdf-am
1071
1072 install-ps: install-ps-am
1073
1074 installcheck-am:
1075
1076 maintainer-clean: maintainer-clean-am
1077         -rm -rf ./$(DEPDIR)
1078         -rm -f Makefile
1079 maintainer-clean-am: distclean-am maintainer-clean-generic
1080
1081 mostlyclean: mostlyclean-am
1082
1083 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1084         mostlyclean-libtool
1085
1086 pdf: pdf-am
1087
1088 pdf-am:
1089
1090 ps: ps-am
1091
1092 ps-am:
1093
1094 uninstall-am: uninstall-sbinPROGRAMS
1095
1096 .MAKE: install-am install-data-am install-exec-am install-strip
1097
1098 .PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
1099         clean-libtool clean-sbinPROGRAMS ctags distclean \
1100         distclean-compile distclean-generic distclean-libtool \
1101         distclean-tags distdir dvi dvi-am html html-am info info-am \
1102         install install-am install-data install-data-am \
1103         install-data-hook install-dvi install-dvi-am install-exec \
1104         install-exec-am install-exec-hook install-html install-html-am \
1105         install-info install-info-am install-man install-pdf \
1106         install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
1107         install-strip installcheck installcheck-am installdirs \
1108         maintainer-clean maintainer-clean-generic mostlyclean \
1109         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1110         pdf pdf-am ps ps-am tags uninstall uninstall-am \
1111         uninstall-sbinPROGRAMS
1112
1113
1114 installperms-exec:
1115         @installperms="$(INSTALLPERMS_exec)"; \
1116         test -n "$$installperms" && echo "Setting installation permissions on executables"; \
1117         dest=; chown=; chmod=; \
1118         for cmd in $$installperms; do \
1119             case "$$cmd" in \
1120                 chown=amanda) \
1121                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1122                 dest=*|chown=*|chmod=*) \
1123                         echo "  ($$cmd)"; eval $$cmd;; \
1124                 *) $(do_file) ;; \
1125             esac; \
1126         done
1127
1128 installperms-data:
1129         @installperms="$(INSTALLPERMS_data)"; \
1130         dest=; chown=; chmod=; \
1131         for cmd in $$installperms; do \
1132             case "$$cmd" in \
1133                 chown=amanda) \
1134                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1135                 dest=*|chown=*|chmod=*) \
1136                         echo "  ($$cmd)"; eval $$cmd;; \
1137                 *)  $(do_file) ;; \
1138             esac; \
1139         done
1140
1141 install-exec-hook: installperms-exec
1142 install-data-hook: installperms-data
1143
1144 # define a rule to initialize the installperms manifest file
1145 @WANT_INSTALLPERMS_TRUE@installperms-init:
1146 @WANT_INSTALLPERMS_FALSE@installperms-init:
1147 @WANT_INSTALLPERMS_FALSE@       rm -f "$(installperms_sh)"
1148
1149 # A rule to make precompiler output from C files.  This is not used during
1150 # ordinary builds, but but can very useful in debugging problems on strange
1151 # architectures.  With this rule, we can ask users to 'make foo.i' and send
1152 # the result to us.
1153 #
1154 # It touches some automake internals ($COMPILE), but since it's not
1155 # build-critical, that's OK.
1156 %.i : %.c
1157         $(COMPILE) -E -o $@ $<
1158
1159 # so that uscan.c is never generated before uparse.h
1160 # otherwise we might have makedepend problems
1161 uscan.c: uparse.h
1162
1163 # these two commands are specially defined to omit $(AMANDA_WARNING_CFLAGS)
1164 # since we don't want warnings for generated code
1165 uscan.$(OBJEXT): uscan.c
1166         $(CC) $(CFLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -c $<
1167
1168 uparse.$(OBJEXT): uparse.c
1169         $(CC) $(CFLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) -c $<
1170
1171 lint:
1172         @ f="$(amoldrecover_CSRC)";                                             \
1173         (cd ../common-src; make listlibsrc);                                    \
1174         f="$$f "`cat ../common-src/listlibsrc.output`;                          \
1175         (cd ../server-src; make listlibsrc);                                    \
1176         f="$$f "`cat ../server-src/listlibsrc.output`;                          \
1177         echo $(LINT) $$f;                                                       \
1178         $(LINT) $(LINTFLAGS) $(CPPFLAGS) $(DEFS) -I. -I$(top_builddir)/config $(INCLUDES) $$f;\
1179         if [ $$? -ne 0 ]; then                                                  \
1180             exit 1;                                                             \
1181         fi;                                                                     \
1182         exit 0
1183 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1184 # Otherwise a system limit (for SysV at least) may be exceeded.
1185 .NOEXPORT: