git.gag.com Git - debian/amanda/blob - amar-src/Makefile.in

   1 # Makefile.in generated by automake 1.11 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # Makefile for Amanda archive library
  19
  20 # vim:ft=automake
  21 # Copyright (c) 2007,2008,2009 Zmanda, Inc.  All Rights Reserved.
  22 #
  23 # This program is free software; you can redistribute it and/or modify it
  24 # under the terms of the GNU General Public License version 2 as published
  25 # by the Free Software Foundation.
  26 #
  27 # This program is distributed in the hope that it will be useful, but
  28 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  29 # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  30 # for more details.
  31 #
  32 # You should have received a copy of the GNU General Public License along
  33 # with this program; if not, write to the Free Software Foundation, Inc.,
  34 # 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  35 #
  36 # Contact information: Zmanda Inc., 465 S. Mathilda Ave., Suite 300
  37 # Sunnyvale, CA 94085, USA, or: http://www.zmanda.com
  38
  39 # simple include file to pre-define variables which are then +='d by other
  40 # scripts in this directory.
  41
  42 # vim:ft=automake
  43 #
  44 # Adjust post-install permissions settings.  This rule works off two
  45 # specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
  46 # Each is a whitespace-separated list of commands, all of which are either
  47 # a variable assignment or a filename.  Three variables are available:
  48 #
  49 #  - dest= sets the destination directory to e.g., $(sbindir)
  50 #  - chown= controls changes in ownership; value is first argument to chown
  51 #  - chmod= controls changes in permissions; value is first argument to chmod
  52 #
  53 # As a special case, chown=amanda is taken as equivalent to
  54 # chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
  55 # whitespace in the user/group names.
  56 #
  57 # when a filename is seen, the currently active variables are applied.
  58 #
  59 # Note that scripts are data, not executables!
  60 #
  61 # EXAMPLE
  62 #
  63 # sbin_PROGRAMS = foo bar bing
  64 # libexec_PROGRAMS = pro gram
  65 # sbin_SCRIPTS = sk ript
  66 # INSTALLPERMS_exec = \
  67 #       dest=$(sbindir) chown=amanda chmod= \
  68 #               foo bar \
  69 #       chmod=07450 \
  70 #               bing
  71 #       dest=$(libexecdir) chmod= \
  72 #               $(libexec_PROGRAMS)
  73 # INSTALLPERMS_data = \
  74 #       dest=$(sbindir) chown=amanda chmod= \
  75 #               $(sbin_SCRIPTS)
  76 #
  77 # This whole operation is not required when making builds for packaging,
  78 # and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
  79 # AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
  80 # build directory is populated with a format suitable for shell interpretation,
  81 # with lines like this:
  82 #   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
  83 # the arguments being, respectively, owner:group, mode, and filename.  There will
  84 # be exactly one line for each file which has specific permissions.  The intention
  85 # is that this file be used by packaging scripts to set correct permissions at install
  86 # time.  Note that files which have no special permissions requirements do not appear
  87 # in this file at all, due to limitations of Automake.
  88
  89 # vim:ft=automake
  90
  91
  92
  93 VPATH = @srcdir@
  94 pkgdatadir = $(datadir)/@PACKAGE@
  95 pkgincludedir = $(includedir)/@PACKAGE@
  96 pkglibdir = $(libdir)/@PACKAGE@
  97 pkglibexecdir = $(libexecdir)/@PACKAGE@
  98 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  99 install_sh_DATA = $(install_sh) -c -m 644
 100 install_sh_PROGRAM = $(install_sh) -c
 101 install_sh_SCRIPT = $(install_sh) -c
 102 INSTALL_HEADER = $(INSTALL_DATA)
 103 transform = $(program_transform_name)
 104 NORMAL_INSTALL = :
 105 PRE_INSTALL = :
 106 POST_INSTALL = :
 107 NORMAL_UNINSTALL = :
 108 PRE_UNINSTALL = :
 109 POST_UNINSTALL = :
 110 build_triplet = @build@
 111 host_triplet = @host@
 112 DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
 113         $(srcdir)/Makefile.in \
 114         $(top_srcdir)/config/automake/installperms.am \
 115         $(top_srcdir)/config/automake/precompile.am \
 116         $(top_srcdir)/config/automake/vars.am
 117 @WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
 118 sbin_PROGRAMS = amarchiver$(EXEEXT)
 119 TESTS = amar-test$(EXEEXT)
 120 noinst_PROGRAMS = $(am__EXEEXT_1)
 121 subdir = amar-src
 122 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 123 am__aclocal_m4_deps =  \
 124         $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
 125         $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
 126         $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
 127         $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
 128         $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
 129         $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
 130         $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
 131         $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
 132         $(top_srcdir)/config/macro-archive/xsltproc.m4 \
 133         $(top_srcdir)/config/amanda/amplot.m4 \
 134         $(top_srcdir)/config/amanda/bsd-security.m4 \
 135         $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
 136         $(top_srcdir)/config/amanda/bsdudp-security.m4 \
 137         $(top_srcdir)/config/amanda/changer.m4 \
 138         $(top_srcdir)/config/amanda/components.m4 \
 139         $(top_srcdir)/config/amanda/compress.m4 \
 140         $(top_srcdir)/config/amanda/config.m4 \
 141         $(top_srcdir)/config/amanda/debugging.m4 \
 142         $(top_srcdir)/config/amanda/defaults.m4 \
 143         $(top_srcdir)/config/amanda/devprefix.m4 \
 144         $(top_srcdir)/config/amanda/dirs.m4 \
 145         $(top_srcdir)/config/amanda/documentation.m4 \
 146         $(top_srcdir)/config/amanda/dumpers.m4 \
 147         $(top_srcdir)/config/amanda/dvdrw-device.m4 \
 148         $(top_srcdir)/config/amanda/flags.m4 \
 149         $(top_srcdir)/config/amanda/flock.m4 \
 150         $(top_srcdir)/config/amanda/funcs.m4 \
 151         $(top_srcdir)/config/amanda/getfsent.m4 \
 152         $(top_srcdir)/config/amanda/i18n.m4 \
 153         $(top_srcdir)/config/amanda/ipv6.m4 \
 154         $(top_srcdir)/config/amanda/krb5-security.m4 \
 155         $(top_srcdir)/config/amanda/lfs.m4 \
 156         $(top_srcdir)/config/amanda/libs.m4 \
 157         $(top_srcdir)/config/amanda/ndmp-device.m4 \
 158         $(top_srcdir)/config/amanda/net.m4 \
 159         $(top_srcdir)/config/amanda/progs.m4 \
 160         $(top_srcdir)/config/amanda/ps.m4 \
 161         $(top_srcdir)/config/amanda/readdir.m4 \
 162         $(top_srcdir)/config/amanda/readline.m4 \
 163         $(top_srcdir)/config/amanda/rsh-security.m4 \
 164         $(top_srcdir)/config/amanda/s3-device.m4 \
 165         $(top_srcdir)/config/amanda/shmem.m4 \
 166         $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
 167         $(top_srcdir)/config/amanda/ssh-security.m4 \
 168         $(top_srcdir)/config/amanda/summary.m4 \
 169         $(top_srcdir)/config/amanda/swig.m4 \
 170         $(top_srcdir)/config/amanda/syshacks.m4 \
 171         $(top_srcdir)/config/amanda/tape.m4 \
 172         $(top_srcdir)/config/amanda/types.m4 \
 173         $(top_srcdir)/config/amanda/userid.m4 \
 174         $(top_srcdir)/config/amanda/version.m4 \
 175         $(top_srcdir)/config/gnulib/00gnulib.m4 \
 176         $(top_srcdir)/config/gnulib/alloca.m4 \
 177         $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
 178         $(top_srcdir)/config/gnulib/base64.m4 \
 179         $(top_srcdir)/config/gnulib/btowc.m4 \
 180         $(top_srcdir)/config/gnulib/errno_h.m4 \
 181         $(top_srcdir)/config/gnulib/extensions.m4 \
 182         $(top_srcdir)/config/gnulib/float_h.m4 \
 183         $(top_srcdir)/config/gnulib/fseeko.m4 \
 184         $(top_srcdir)/config/gnulib/fsusage.m4 \
 185         $(top_srcdir)/config/gnulib/ftello.m4 \
 186         $(top_srcdir)/config/gnulib/ftruncate.m4 \
 187         $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
 188         $(top_srcdir)/config/gnulib/getopt.m4 \
 189         $(top_srcdir)/config/gnulib/gettimeofday.m4 \
 190         $(top_srcdir)/config/gnulib/gnulib-common.m4 \
 191         $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
 192         $(top_srcdir)/config/gnulib/hostent.m4 \
 193         $(top_srcdir)/config/gnulib/include_next.m4 \
 194         $(top_srcdir)/config/gnulib/inet_ntop.m4 \
 195         $(top_srcdir)/config/gnulib/intmax_t.m4 \
 196         $(top_srcdir)/config/gnulib/localcharset.m4 \
 197         $(top_srcdir)/config/gnulib/locale-fr.m4 \
 198         $(top_srcdir)/config/gnulib/locale-ja.m4 \
 199         $(top_srcdir)/config/gnulib/locale-zh.m4 \
 200         $(top_srcdir)/config/gnulib/lock.m4 \
 201         $(top_srcdir)/config/gnulib/longlong.m4 \
 202         $(top_srcdir)/config/gnulib/lseek.m4 \
 203         $(top_srcdir)/config/gnulib/lstat.m4 \
 204         $(top_srcdir)/config/gnulib/malloc.m4 \
 205         $(top_srcdir)/config/gnulib/mbrtowc.m4 \
 206         $(top_srcdir)/config/gnulib/mbsinit.m4 \
 207         $(top_srcdir)/config/gnulib/mbstate_t.m4 \
 208         $(top_srcdir)/config/gnulib/mkdtemp.m4 \
 209         $(top_srcdir)/config/gnulib/multiarch.m4 \
 210         $(top_srcdir)/config/gnulib/netdb_h.m4 \
 211         $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
 212         $(top_srcdir)/config/gnulib/onceonly.m4 \
 213         $(top_srcdir)/config/gnulib/physmem.m4 \
 214         $(top_srcdir)/config/gnulib/printf.m4 \
 215         $(top_srcdir)/config/gnulib/regex.m4 \
 216         $(top_srcdir)/config/gnulib/safe-read.m4 \
 217         $(top_srcdir)/config/gnulib/safe-write.m4 \
 218         $(top_srcdir)/config/gnulib/servent.m4 \
 219         $(top_srcdir)/config/gnulib/snprintf.m4 \
 220         $(top_srcdir)/config/gnulib/socklen.m4 \
 221         $(top_srcdir)/config/gnulib/sockpfaf.m4 \
 222         $(top_srcdir)/config/gnulib/ssize_t.m4 \
 223         $(top_srcdir)/config/gnulib/stdbool.m4 \
 224         $(top_srcdir)/config/gnulib/stdint.m4 \
 225         $(top_srcdir)/config/gnulib/stdio_h.m4 \
 226         $(top_srcdir)/config/gnulib/stdlib_h.m4 \
 227         $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
 228         $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
 229         $(top_srcdir)/config/gnulib/sys_time_h.m4 \
 230         $(top_srcdir)/config/gnulib/tempname.m4 \
 231         $(top_srcdir)/config/gnulib/threadlib.m4 \
 232         $(top_srcdir)/config/gnulib/unistd_h.m4 \
 233         $(top_srcdir)/config/gnulib/vasnprintf.m4 \
 234         $(top_srcdir)/config/gnulib/visibility.m4 \
 235         $(top_srcdir)/config/gnulib/wchar.m4 \
 236         $(top_srcdir)/config/gnulib/wcrtomb.m4 \
 237         $(top_srcdir)/config/gnulib/wctype.m4 \
 238         $(top_srcdir)/config/gnulib/write.m4 \
 239         $(top_srcdir)/config/gettext-macros/codeset.m4 \
 240         $(top_srcdir)/config/gettext-macros/gettext.m4 \
 241         $(top_srcdir)/config/gettext-macros/glibc21.m4 \
 242         $(top_srcdir)/config/gettext-macros/iconv.m4 \
 243         $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
 244         $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
 245         $(top_srcdir)/config/gettext-macros/lib-link.m4 \
 246         $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
 247         $(top_srcdir)/config/gettext-macros/nls.m4 \
 248         $(top_srcdir)/config/gettext-macros/po.m4 \
 249         $(top_srcdir)/config/gettext-macros/progtest.m4 \
 250         $(top_srcdir)/config/gettext-macros/size_max.m4 \
 251         $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
 252         $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
 253         $(top_srcdir)/config/gettext-macros/wint_t.m4 \
 254         $(top_srcdir)/config/gettext-macros/xsize.m4 \
 255         $(top_srcdir)/config/libtool.m4 \
 256         $(top_srcdir)/config/ltoptions.m4 \
 257         $(top_srcdir)/config/ltsugar.m4 \
 258         $(top_srcdir)/config/ltversion.m4 \
 259         $(top_srcdir)/config/lt~obsolete.m4 $(top_srcdir)/configure.in
 260 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 261         $(ACLOCAL_M4)
 262 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
 263 CONFIG_HEADER = $(top_builddir)/config/config.h
 264 CONFIG_CLEAN_FILES =
 265 CONFIG_CLEAN_VPATH_FILES =
 266 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 267 am__vpath_adj = case $$p in \
 268     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 269     *) f=$$p;; \
 270   esac;
 271 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 272 am__install_max = 40
 273 am__nobase_strip_setup = \
 274   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 275 am__nobase_strip = \
 276   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 277 am__nobase_list = $(am__nobase_strip_setup); \
 278   for p in $$list; do echo "$$p $$p"; done | \
 279   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 280   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 281     if (++n[$$2] == $(am__install_max)) \
 282       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 283     END { for (dir in files) print dir, files[dir] }'
 284 am__base_list = \
 285   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 286   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 287 am__installdirs = "$(DESTDIR)$(amlibdir)" "$(DESTDIR)$(sbindir)"
 288 LTLIBRARIES = $(amlib_LTLIBRARIES)
 289 libamar_la_DEPENDENCIES = ../common-src/libamanda.la
 290 am_libamar_la_OBJECTS = amar.lo
 291 libamar_la_OBJECTS = $(am_libamar_la_OBJECTS)
 292 libamar_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
 293         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 294         $(libamar_la_LDFLAGS) $(LDFLAGS) -o $@
 295 am__EXEEXT_1 = amar-test$(EXEEXT)
 296 PROGRAMS = $(noinst_PROGRAMS) $(sbin_PROGRAMS)
 297 am_amar_test_OBJECTS = amar-test.$(OBJEXT)
 298 amar_test_OBJECTS = $(am_amar_test_OBJECTS)
 299 amar_test_DEPENDENCIES = libamar.la ../common-src/libtestutils.la
 300 am_amarchiver_OBJECTS = amarchiver.$(OBJEXT)
 301 amarchiver_OBJECTS = $(am_amarchiver_OBJECTS)
 302 amarchiver_DEPENDENCIES = libamar.la
 303 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config
 304 depcomp = $(SHELL) $(top_srcdir)/config/depcomp
 305 am__depfiles_maybe = depfiles
 306 am__mv = mv -f
 307 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 308         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 309 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 310         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 311         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 312 CCLD = $(CC)
 313 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 314         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 315         $(LDFLAGS) -o $@
 316 SOURCES = $(libamar_la_SOURCES) $(amar_test_SOURCES) \
 317         $(amarchiver_SOURCES)
 318 DIST_SOURCES = $(libamar_la_SOURCES) $(amar_test_SOURCES) \
 319         $(amarchiver_SOURCES)
 320 HEADERS = $(noinst_HEADERS)
 321 ETAGS = etags
 322 CTAGS = ctags
 323 am__tty_colors = \
 324 red=; grn=; lgn=; blu=; std=
 325 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 326 ACLOCAL = @ACLOCAL@
 327 AIX_BACKUP = @AIX_BACKUP@
 328 ALLOCA = @ALLOCA@
 329 ALLOCA_H = @ALLOCA_H@
 330 AMANDA_COMPONENTS = @AMANDA_COMPONENTS@
 331 AMANDA_DBGDIR = @AMANDA_DBGDIR@
 332 AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
 333 AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
 334 AMANDA_SWIG_PERL_CFLAGS = @AMANDA_SWIG_PERL_CFLAGS@
 335 AMANDA_TMPDIR = @AMANDA_TMPDIR@
 336 AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
 337 AMLINT = @AMLINT@
 338 AMLINTFLAGS = @AMLINTFLAGS@
 339 AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
 340 AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
 341 AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
 342 AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
 343 AMTAR = @AMTAR@
 344 APPLE_UNIVERSAL_BUILD = @APPLE_UNIVERSAL_BUILD@
 345 APPLICATION_DIR = @APPLICATION_DIR@
 346 AR = @AR@
 347 ARPA_INET_H = @ARPA_INET_H@
 348 ASSERTIONS = @ASSERTIONS@
 349 AUTOCONF = @AUTOCONF@
 350 AUTOHEADER = @AUTOHEADER@
 351 AUTOMAKE = @AUTOMAKE@
 352 AWK = @AWK@
 353 BASH = @BASH@
 354 BINARY_OWNER = @BINARY_OWNER@
 355 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
 356 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
 357 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
 358 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
 359 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 360 BSDTCP_SECURITY = @BSDTCP_SECURITY@
 361 BSDUDP_SECURITY = @BSDUDP_SECURITY@
 362 BSD_SECURITY = @BSD_SECURITY@
 363 CAT = @CAT@
 364 CC = @CC@
 365 CCDEPMODE = @CCDEPMODE@
 366 CFLAGS = @CFLAGS@
 367 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 368 CHECK_USERID = @CHECK_USERID@
 369 CHIO = @CHIO@
 370 CHS = @CHS@
 371 CLIENT_LOGIN = @CLIENT_LOGIN@
 372 CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
 373 COMPRESS = @COMPRESS@
 374 COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
 375 COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
 376 COMPRESS_PATH = @COMPRESS_PATH@
 377 COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
 378 CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
 379 CONFIG_DIR = @CONFIG_DIR@
 380 CPP = @CPP@
 381 CPPFLAGS = @CPPFLAGS@
 382 CURL_CONFIG = @CURL_CONFIG@
 383 CYGPATH_W = @CYGPATH_W@
 384 DD = @DD@
 385 DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
 386 DEFAULT_CONFIG = @DEFAULT_CONFIG@
 387 DEFAULT_MAILER = @DEFAULT_MAILER@
 388 DEFAULT_SERVER = @DEFAULT_SERVER@
 389 DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
 390 DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
 391 DEFS = @DEFS@
 392 DEPDIR = @DEPDIR@
 393 DOC_BUILD_DATE = @DOC_BUILD_DATE@
 394 DSYMUTIL = @DSYMUTIL@
 395 DUMP = @DUMP@
 396 DUMPBIN = @DUMPBIN@
 397 DUMP_RETURNS_1 = @DUMP_RETURNS_1@
 398 ECHO_C = @ECHO_C@
 399 ECHO_N = @ECHO_N@
 400 ECHO_T = @ECHO_T@
 401 EGREP = @EGREP@
 402 EMULTIHOP_HIDDEN = @EMULTIHOP_HIDDEN@
 403 EMULTIHOP_VALUE = @EMULTIHOP_VALUE@
 404 ENOLINK_HIDDEN = @ENOLINK_HIDDEN@
 405 ENOLINK_VALUE = @ENOLINK_VALUE@
 406 EOVERFLOW_HIDDEN = @EOVERFLOW_HIDDEN@
 407 EOVERFLOW_VALUE = @EOVERFLOW_VALUE@
 408 ERRNO_H = @ERRNO_H@
 409 EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
 410 EXEEXT = @EXEEXT@
 411 FGREP = @FGREP@
 412 FLOAT_H = @FLOAT_H@
 413 GETADDRINFO_LIB = @GETADDRINFO_LIB@
 414 GETCONF = @GETCONF@
 415 GETOPT_H = @GETOPT_H@
 416 GETTEXT = @GETTEXT@
 417 GIT = @GIT@
 418 GLIBC21 = @GLIBC21@
 419 GLIB_CFLAGS = @GLIB_CFLAGS@
 420 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
 421 GLIB_LIBS = @GLIB_LIBS@
 422 GLIB_MKENUMS = @GLIB_MKENUMS@
 423 GMSGFMT = @GMSGFMT@
 424 GMSGFMT_015 = @GMSGFMT_015@
 425 GNULIB_ACCEPT = @GNULIB_ACCEPT@
 426 GNULIB_ATOLL = @GNULIB_ATOLL@
 427 GNULIB_BIND = @GNULIB_BIND@
 428 GNULIB_BTOWC = @GNULIB_BTOWC@
 429 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
 430 GNULIB_CHOWN = @GNULIB_CHOWN@
 431 GNULIB_CLOSE = @GNULIB_CLOSE@
 432 GNULIB_CONNECT = @GNULIB_CONNECT@
 433 GNULIB_DPRINTF = @GNULIB_DPRINTF@
 434 GNULIB_DUP2 = @GNULIB_DUP2@
 435 GNULIB_ENVIRON = @GNULIB_ENVIRON@
 436 GNULIB_EUIDACCESS = @GNULIB_EUIDACCESS@
 437 GNULIB_FCHDIR = @GNULIB_FCHDIR@
 438 GNULIB_FCLOSE = @GNULIB_FCLOSE@
 439 GNULIB_FFLUSH = @GNULIB_FFLUSH@
 440 GNULIB_FOPEN = @GNULIB_FOPEN@
 441 GNULIB_FPRINTF = @GNULIB_FPRINTF@
 442 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
 443 GNULIB_FPUTC = @GNULIB_FPUTC@
 444 GNULIB_FPUTS = @GNULIB_FPUTS@
 445 GNULIB_FREOPEN = @GNULIB_FREOPEN@
 446 GNULIB_FSEEK = @GNULIB_FSEEK@
 447 GNULIB_FSEEKO = @GNULIB_FSEEKO@
 448 GNULIB_FSYNC = @GNULIB_FSYNC@
 449 GNULIB_FTELL = @GNULIB_FTELL@
 450 GNULIB_FTELLO = @GNULIB_FTELLO@
 451 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
 452 GNULIB_FWRITE = @GNULIB_FWRITE@
 453 GNULIB_GETADDRINFO = @GNULIB_GETADDRINFO@
 454 GNULIB_GETCWD = @GNULIB_GETCWD@
 455 GNULIB_GETDELIM = @GNULIB_GETDELIM@
 456 GNULIB_GETDOMAINNAME = @GNULIB_GETDOMAINNAME@
 457 GNULIB_GETDTABLESIZE = @GNULIB_GETDTABLESIZE@
 458 GNULIB_GETHOSTNAME = @GNULIB_GETHOSTNAME@
 459 GNULIB_GETLINE = @GNULIB_GETLINE@
 460 GNULIB_GETLOADAVG = @GNULIB_GETLOADAVG@
 461 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
 462 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
 463 GNULIB_GETPEERNAME = @GNULIB_GETPEERNAME@
 464 GNULIB_GETSOCKNAME = @GNULIB_GETSOCKNAME@
 465 GNULIB_GETSOCKOPT = @GNULIB_GETSOCKOPT@
 466 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
 467 GNULIB_GETUSERSHELL = @GNULIB_GETUSERSHELL@
 468 GNULIB_INET_NTOP = @GNULIB_INET_NTOP@
 469 GNULIB_INET_PTON = @GNULIB_INET_PTON@
 470 GNULIB_LCHMOD = @GNULIB_LCHMOD@
 471 GNULIB_LCHOWN = @GNULIB_LCHOWN@
 472 GNULIB_LINK = @GNULIB_LINK@
 473 GNULIB_LISTEN = @GNULIB_LISTEN@
 474 GNULIB_LSEEK = @GNULIB_LSEEK@
 475 GNULIB_LSTAT = @GNULIB_LSTAT@
 476 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
 477 GNULIB_MBRLEN = @GNULIB_MBRLEN@
 478 GNULIB_MBRTOWC = @GNULIB_MBRTOWC@
 479 GNULIB_MBSINIT = @GNULIB_MBSINIT@
 480 GNULIB_MBSNRTOWCS = @GNULIB_MBSNRTOWCS@
 481 GNULIB_MBSRTOWCS = @GNULIB_MBSRTOWCS@
 482 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
 483 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
 484 GNULIB_OBSTACK_PRINTF = @GNULIB_OBSTACK_PRINTF@
 485 GNULIB_OBSTACK_PRINTF_POSIX = @GNULIB_OBSTACK_PRINTF_POSIX@
 486 GNULIB_PERROR = @GNULIB_PERROR@
 487 GNULIB_PRINTF = @GNULIB_PRINTF@
 488 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
 489 GNULIB_PUTC = @GNULIB_PUTC@
 490 GNULIB_PUTCHAR = @GNULIB_PUTCHAR@
 491 GNULIB_PUTENV = @GNULIB_PUTENV@
 492 GNULIB_PUTS = @GNULIB_PUTS@
 493 GNULIB_RANDOM_R = @GNULIB_RANDOM_R@
 494 GNULIB_READLINK = @GNULIB_READLINK@
 495 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
 496 GNULIB_RECV = @GNULIB_RECV@
 497 GNULIB_RECVFROM = @GNULIB_RECVFROM@
 498 GNULIB_RPMATCH = @GNULIB_RPMATCH@
 499 GNULIB_SEND = @GNULIB_SEND@
 500 GNULIB_SENDTO = @GNULIB_SENDTO@
 501 GNULIB_SETENV = @GNULIB_SETENV@
 502 GNULIB_SETSOCKOPT = @GNULIB_SETSOCKOPT@
 503 GNULIB_SHUTDOWN = @GNULIB_SHUTDOWN@
 504 GNULIB_SLEEP = @GNULIB_SLEEP@
 505 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
 506 GNULIB_SOCKET = @GNULIB_SOCKET@
 507 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
 508 GNULIB_STDIO_H_SIGPIPE = @GNULIB_STDIO_H_SIGPIPE@
 509 GNULIB_STRTOD = @GNULIB_STRTOD@
 510 GNULIB_STRTOLL = @GNULIB_STRTOLL@
 511 GNULIB_STRTOULL = @GNULIB_STRTOULL@
 512 GNULIB_UNISTD_H_SIGPIPE = @GNULIB_UNISTD_H_SIGPIPE@
 513 GNULIB_UNSETENV = @GNULIB_UNSETENV@
 514 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
 515 GNULIB_VDPRINTF = @GNULIB_VDPRINTF@
 516 GNULIB_VFPRINTF = @GNULIB_VFPRINTF@
 517 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
 518 GNULIB_VPRINTF = @GNULIB_VPRINTF@
 519 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
 520 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
 521 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
 522 GNULIB_WCRTOMB = @GNULIB_WCRTOMB@
 523 GNULIB_WCSNRTOMBS = @GNULIB_WCSNRTOMBS@
 524 GNULIB_WCSRTOMBS = @GNULIB_WCSRTOMBS@
 525 GNULIB_WCTOB = @GNULIB_WCTOB@
 526 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
 527 GNULIB_WRITE = @GNULIB_WRITE@
 528 GNUPLOT = @GNUPLOT@
 529 GNUTAR = @GNUTAR@
 530 GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
 531 GOBJECT_QUERY = @GOBJECT_QUERY@
 532 GREP = @GREP@
 533 GZIP = @GZIP@
 534 HAVE_ARPA_INET_H = @HAVE_ARPA_INET_H@
 535 HAVE_ATOLL = @HAVE_ATOLL@
 536 HAVE_BTOWC = @HAVE_BTOWC@
 537 HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
 538 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
 539 HAVE_DECL_FREEADDRINFO = @HAVE_DECL_FREEADDRINFO@
 540 HAVE_DECL_GAI_STRERROR = @HAVE_DECL_GAI_STRERROR@
 541 HAVE_DECL_GETADDRINFO = @HAVE_DECL_GETADDRINFO@
 542 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
 543 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
 544 HAVE_DECL_GETLOADAVG = @HAVE_DECL_GETLOADAVG@
 545 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
 546 HAVE_DECL_GETNAMEINFO = @HAVE_DECL_GETNAMEINFO@
 547 HAVE_DECL_INET_NTOP = @HAVE_DECL_INET_NTOP@
 548 HAVE_DECL_INET_PTON = @HAVE_DECL_INET_PTON@
 549 HAVE_DECL_OBSTACK_PRINTF = @HAVE_DECL_OBSTACK_PRINTF@
 550 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
 551 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
 552 HAVE_DECL_WCTOB = @HAVE_DECL_WCTOB@
 553 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
 554 HAVE_DPRINTF = @HAVE_DPRINTF@
 555 HAVE_DUP2 = @HAVE_DUP2@
 556 HAVE_EUIDACCESS = @HAVE_EUIDACCESS@
 557 HAVE_FSEEKO = @HAVE_FSEEKO@
 558 HAVE_FSYNC = @HAVE_FSYNC@
 559 HAVE_FTELLO = @HAVE_FTELLO@
 560 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
 561 HAVE_GETDOMAINNAME = @HAVE_GETDOMAINNAME@
 562 HAVE_GETDTABLESIZE = @HAVE_GETDTABLESIZE@
 563 HAVE_GETHOSTNAME = @HAVE_GETHOSTNAME@
 564 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
 565 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
 566 HAVE_GETUSERSHELL = @HAVE_GETUSERSHELL@
 567 HAVE_GZIP = @HAVE_GZIP@
 568 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
 569 HAVE_ISWCNTRL = @HAVE_ISWCNTRL@
 570 HAVE_LCHMOD = @HAVE_LCHMOD@
 571 HAVE_LINK = @HAVE_LINK@
 572 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
 573 HAVE_LSTAT = @HAVE_LSTAT@
 574 HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
 575 HAVE_MBRLEN = @HAVE_MBRLEN@
 576 HAVE_MBRTOWC = @HAVE_MBRTOWC@
 577 HAVE_MBSINIT = @HAVE_MBSINIT@
 578 HAVE_MBSNRTOWCS = @HAVE_MBSNRTOWCS@
 579 HAVE_MBSRTOWCS = @HAVE_MBSRTOWCS@
 580 HAVE_MKDTEMP = @HAVE_MKDTEMP@
 581 HAVE_NETDB_H = @HAVE_NETDB_H@
 582 HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
 583 HAVE_OS_H = @HAVE_OS_H@
 584 HAVE_RANDOM_H = @HAVE_RANDOM_H@
 585 HAVE_RANDOM_R = @HAVE_RANDOM_R@
 586 HAVE_READLINK = @HAVE_READLINK@
 587 HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
 588 HAVE_RPMATCH = @HAVE_RPMATCH@
 589 HAVE_SETENV = @HAVE_SETENV@
 590 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
 591 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
 592 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
 593 HAVE_SLEEP = @HAVE_SLEEP@
 594 HAVE_STDINT_H = @HAVE_STDINT_H@
 595 HAVE_STRTOD = @HAVE_STRTOD@
 596 HAVE_STRTOLL = @HAVE_STRTOLL@
 597 HAVE_STRTOULL = @HAVE_STRTOULL@
 598 HAVE_STRUCT_ADDRINFO = @HAVE_STRUCT_ADDRINFO@
 599 HAVE_STRUCT_RANDOM_DATA = @HAVE_STRUCT_RANDOM_DATA@
 600 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
 601 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
 602 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
 603 HAVE_SYS_LOADAVG_H = @HAVE_SYS_LOADAVG_H@
 604 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
 605 HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
 606 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
 607 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
 608 HAVE_UNISTD_H = @HAVE_UNISTD_H@
 609 HAVE_UNSETENV = @HAVE_UNSETENV@
 610 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
 611 HAVE_VASPRINTF = @HAVE_VASPRINTF@
 612 HAVE_VDPRINTF = @HAVE_VDPRINTF@
 613 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 614 HAVE_WCHAR_H = @HAVE_WCHAR_H@
 615 HAVE_WCRTOMB = @HAVE_WCRTOMB@
 616 HAVE_WCSNRTOMBS = @HAVE_WCSNRTOMBS@
 617 HAVE_WCSRTOMBS = @HAVE_WCSRTOMBS@
 618 HAVE_WCTYPE_H = @HAVE_WCTYPE_H@
 619 HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
 620 HAVE_WINT_T = @HAVE_WINT_T@
 621 HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
 622 HAVE__BOOL = @HAVE__BOOL@
 623 HOSTENT_LIB = @HOSTENT_LIB@
 624 INCLUDE_NEXT = @INCLUDE_NEXT@
 625 INCLUDE_NEXT_AS_FIRST_DIRECTIVE = @INCLUDE_NEXT_AS_FIRST_DIRECTIVE@
 626 INSTALL = @INSTALL@
 627 INSTALL_DATA = @INSTALL_DATA@
 628 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 629 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 630 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 631 INTLLIBS = @INTLLIBS@
 632 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 633 KRB5_SECURITY = @KRB5_SECURITY@
 634 LD = @LD@
 635 LDFLAGS = @LDFLAGS@
 636 LEX = @LEX@
 637 LEXLIB = @LEXLIB@
 638 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 639 LIBCURL = @LIBCURL@
 640 LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
 641 LIBICONV = @LIBICONV@
 642 LIBINTL = @LIBINTL@
 643 LIBMULTITHREAD = @LIBMULTITHREAD@
 644 LIBOBJS = @LIBOBJS@
 645 LIBPTH = @LIBPTH@
 646 LIBS = @LIBS@
 647 LIBTHREAD = @LIBTHREAD@
 648 LIBTOOL = @LIBTOOL@
 649 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 650 LIPO = @LIPO@
 651 LN_S = @LN_S@
 652 LOCALCHARSET_TESTS_ENVIRONMENT = @LOCALCHARSET_TESTS_ENVIRONMENT@
 653 LOCALE_FR = @LOCALE_FR@
 654 LOCALE_FR_UTF8 = @LOCALE_FR_UTF8@
 655 LOCALE_JA = @LOCALE_JA@
 656 LOCALE_ZH_CN = @LOCALE_ZH_CN@
 657 LOCKING = @LOCKING@
 658 LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
 659 LPR = @LPR@
 660 LPRFLAG = @LPRFLAG@
 661 LTALLOCA = @LTALLOCA@
 662 LTLIBICONV = @LTLIBICONV@
 663 LTLIBINTL = @LTLIBINTL@
 664 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
 665 LTLIBOBJS = @LTLIBOBJS@
 666 LTLIBPTH = @LTLIBPTH@
 667 LTLIBTHREAD = @LTLIBTHREAD@
 668 MAILER = @MAILER@
 669 MAKEINFO = @MAKEINFO@
 670 MCUTIL = @MCUTIL@
 671 MKDIR_P = @MKDIR_P@
 672 MSGFMT = @MSGFMT@
 673 MSGFMT_015 = @MSGFMT_015@
 674 MSGMERGE = @MSGMERGE@
 675 MT = @MT@
 676 MTX = @MTX@
 677 MT_FILE_FLAG = @MT_FILE_FLAG@
 678 NETDB_H = @NETDB_H@
 679 NETINET_IN_H = @NETINET_IN_H@
 680 NEXT_ARPA_INET_H = @NEXT_ARPA_INET_H@
 681 NEXT_ERRNO_H = @NEXT_ERRNO_H@
 682 NEXT_FLOAT_H = @NEXT_FLOAT_H@
 683 NEXT_NETDB_H = @NEXT_NETDB_H@
 684 NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
 685 NEXT_STDINT_H = @NEXT_STDINT_H@
 686 NEXT_STDIO_H = @NEXT_STDIO_H@
 687 NEXT_STDLIB_H = @NEXT_STDLIB_H@
 688 NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
 689 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
 690 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
 691 NEXT_UNISTD_H = @NEXT_UNISTD_H@
 692 NEXT_WCHAR_H = @NEXT_WCHAR_H@
 693 NEXT_WCTYPE_H = @NEXT_WCTYPE_H@
 694 NM = @NM@
 695 NMEDIT = @NMEDIT@
 696 OBJEXT = @OBJEXT@
 697 OTOOL = @OTOOL@
 698 OTOOL64 = @OTOOL64@
 699 PACKAGE = @PACKAGE@
 700 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 701 PACKAGE_NAME = @PACKAGE_NAME@
 702 PACKAGE_STRING = @PACKAGE_STRING@
 703 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 704 PACKAGE_VERSION = @PACKAGE_VERSION@
 705 PATH_SEPARATOR = @PATH_SEPARATOR@
 706 PCAT = @PCAT@
 707 PERL = @PERL@
 708 PERLEXTLIBS = @PERLEXTLIBS@
 709 PERL_INC = @PERL_INC@
 710 PKG_CONFIG = @PKG_CONFIG@
 711 POSUB = @POSUB@
 712 PRAGMA_SYSTEM_HEADER = @PRAGMA_SYSTEM_HEADER@
 713 PS = @PS@
 714 PS_ARGUMENT = @PS_ARGUMENT@
 715 PS_ARGUMENT_ARGS = @PS_ARGUMENT_ARGS@
 716 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
 717 RANLIB = @RANLIB@
 718 READLINE_LIBS = @READLINE_LIBS@
 719 REPLACE_BTOWC = @REPLACE_BTOWC@
 720 REPLACE_CHOWN = @REPLACE_CHOWN@
 721 REPLACE_CLOSE = @REPLACE_CLOSE@
 722 REPLACE_DPRINTF = @REPLACE_DPRINTF@
 723 REPLACE_FCHDIR = @REPLACE_FCHDIR@
 724 REPLACE_FCLOSE = @REPLACE_FCLOSE@
 725 REPLACE_FFLUSH = @REPLACE_FFLUSH@
 726 REPLACE_FOPEN = @REPLACE_FOPEN@
 727 REPLACE_FPRINTF = @REPLACE_FPRINTF@
 728 REPLACE_FREOPEN = @REPLACE_FREOPEN@
 729 REPLACE_FSEEK = @REPLACE_FSEEK@
 730 REPLACE_FSEEKO = @REPLACE_FSEEKO@
 731 REPLACE_FTELL = @REPLACE_FTELL@
 732 REPLACE_FTELLO = @REPLACE_FTELLO@
 733 REPLACE_GETCWD = @REPLACE_GETCWD@
 734 REPLACE_GETLINE = @REPLACE_GETLINE@
 735 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
 736 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
 737 REPLACE_ISWCNTRL = @REPLACE_ISWCNTRL@
 738 REPLACE_LCHOWN = @REPLACE_LCHOWN@
 739 REPLACE_LSEEK = @REPLACE_LSEEK@
 740 REPLACE_LSTAT = @REPLACE_LSTAT@
 741 REPLACE_MBRLEN = @REPLACE_MBRLEN@
 742 REPLACE_MBRTOWC = @REPLACE_MBRTOWC@
 743 REPLACE_MBSINIT = @REPLACE_MBSINIT@
 744 REPLACE_MBSNRTOWCS = @REPLACE_MBSNRTOWCS@
 745 REPLACE_MBSRTOWCS = @REPLACE_MBSRTOWCS@
 746 REPLACE_MBSTATE_T = @REPLACE_MBSTATE_T@
 747 REPLACE_MKDIR = @REPLACE_MKDIR@
 748 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
 749 REPLACE_OBSTACK_PRINTF = @REPLACE_OBSTACK_PRINTF@
 750 REPLACE_PERROR = @REPLACE_PERROR@
 751 REPLACE_PRINTF = @REPLACE_PRINTF@
 752 REPLACE_PUTENV = @REPLACE_PUTENV@
 753 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
 754 REPLACE_SPRINTF = @REPLACE_SPRINTF@
 755 REPLACE_STDIO_WRITE_FUNCS = @REPLACE_STDIO_WRITE_FUNCS@
 756 REPLACE_STRTOD = @REPLACE_STRTOD@
 757 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
 758 REPLACE_VDPRINTF = @REPLACE_VDPRINTF@
 759 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
 760 REPLACE_VPRINTF = @REPLACE_VPRINTF@
 761 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
 762 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
 763 REPLACE_WCRTOMB = @REPLACE_WCRTOMB@
 764 REPLACE_WCSRTOMBS = @REPLACE_WCSRTOMBS@
 765 REPLACE_WCTOB = @REPLACE_WCTOB@
 766 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
 767 REPLACE_WRITE = @REPLACE_WRITE@
 768 RESTORE = @RESTORE@
 769 RPCGEN = @RPCGEN@
 770 RSH_SECURITY = @RSH_SECURITY@
 771 SAMBA_CLIENT = @SAMBA_CLIENT@
 772 SED = @SED@
 773 SERVENT_LIB = @SERVENT_LIB@
 774 SERVICE_SUFFIX = @SERVICE_SUFFIX@
 775 SETUID_GROUP = @SETUID_GROUP@
 776 SET_MAKE = @SET_MAKE@
 777 SHELL = @SHELL@
 778 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
 779 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
 780 SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
 781 SORT = @SORT@
 782 SSH = @SSH@
 783 SSH_SECURITY = @SSH_SECURITY@
 784 STAR = @STAR@
 785 STDBOOL_H = @STDBOOL_H@
 786 STDINT_H = @STDINT_H@
 787 STRIP = @STRIP@
 788 SVN = @SVN@
 789 SWIG = @SWIG@
 790 SWIG_LIB = @SWIG_LIB@
 791 SYS_SOCKET_H = @SYS_SOCKET_H@
 792 SYS_STAT_H = @SYS_STAT_H@
 793 SYS_TIME_H = @SYS_TIME_H@
 794 TCPPORTRANGE = @TCPPORTRANGE@
 795 UDPPORTRANGE = @UDPPORTRANGE@
 796 UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
 797 UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
 798 UNISTD_H_HAVE_WINSOCK2_H = @UNISTD_H_HAVE_WINSOCK2_H@
 799 USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
 800 USE_NLS = @USE_NLS@
 801 USE_RUNDUMP = @USE_RUNDUMP@
 802 VDUMP = @VDUMP@
 803 VERSION = @VERSION@
 804 VERSION_COMMENT = @VERSION_COMMENT@
 805 VERSION_MAJOR = @VERSION_MAJOR@
 806 VERSION_MINOR = @VERSION_MINOR@
 807 VERSION_PATCH = @VERSION_PATCH@
 808 VOID_UNSETENV = @VOID_UNSETENV@
 809 VRESTORE = @VRESTORE@
 810 VXDUMP = @VXDUMP@
 811 VXRESTORE = @VXRESTORE@
 812 WCHAR_H = @WCHAR_H@
 813 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
 814 WCTYPE_H = @WCTYPE_H@
 815 WINT_T_SUFFIX = @WINT_T_SUFFIX@
 816 XFSDUMP = @XFSDUMP@
 817 XFSRESTORE = @XFSRESTORE@
 818 XGETTEXT = @XGETTEXT@
 819 XGETTEXT_015 = @XGETTEXT_015@
 820 XSLREL = @XSLREL@
 821 XSLTPROC = @XSLTPROC@
 822 XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
 823 YACC = @YACC@
 824 YFLAGS = @YFLAGS@
 825 _libcurl_config = @_libcurl_config@
 826 abs_builddir = @abs_builddir@
 827 abs_srcdir = @abs_srcdir@
 828 abs_top_builddir = @abs_top_builddir@
 829 abs_top_srcdir = @abs_top_srcdir@
 830 ac_ct_CC = @ac_ct_CC@
 831 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 832 am__include = @am__include@
 833 am__leading_dot = @am__leading_dot@
 834 am__quote = @am__quote@
 835 am__tar = @am__tar@
 836 am__untar = @am__untar@
 837 amdatadir = @amdatadir@
 838 amincludedir = @amincludedir@
 839 amlibdir = @amlibdir@
 840 amlibexecdir = @amlibexecdir@
 841 amperldir = @amperldir@
 842 bindir = @bindir@
 843 build = @build@
 844 build_alias = @build_alias@
 845 build_cpu = @build_cpu@
 846 build_os = @build_os@
 847 build_vendor = @build_vendor@
 848 builddir = @builddir@
 849 datadir = @datadir@
 850 datarootdir = @datarootdir@
 851 docdir = @docdir@
 852 dvidir = @dvidir@
 853 exec_prefix = @exec_prefix@
 854 gl_LIBOBJS = @gl_LIBOBJS@
 855 gl_LTLIBOBJS = @gl_LTLIBOBJS@
 856 gltests_LIBOBJS = @gltests_LIBOBJS@
 857 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
 858 host = @host@
 859 host_alias = @host_alias@
 860 host_cpu = @host_cpu@
 861 host_os = @host_os@
 862 host_vendor = @host_vendor@
 863 htmldir = @htmldir@
 864 includedir = @includedir@
 865 infodir = @infodir@
 866 install_sh = @install_sh@
 867 libdir = @libdir@
 868 libexecdir = @libexecdir@
 869 localedir = @localedir@
 870 localstatedir = @localstatedir@
 871 lt_ECHO = @lt_ECHO@
 872 mandir = @mandir@
 873 mkdir_p = @mkdir_p@
 874 oldincludedir = @oldincludedir@
 875 pdfdir = @pdfdir@
 876 prefix = @prefix@
 877 program_transform_name = @program_transform_name@
 878 psdir = @psdir@
 879 sbindir = @sbindir@
 880 sharedstatedir = @sharedstatedir@
 881 srcdir = @srcdir@
 882 sysconfdir = @sysconfdir@
 883 target_alias = @target_alias@
 884 top_build_prefix = @top_build_prefix@
 885 top_builddir = @top_builddir@
 886 top_srcdir = @top_srcdir@
 887 SUFFIXES =
 888 EXTRA_DIST =
 889 BUILT_SOURCES =
 890 MOSTLYCLEANFILES =
 891 CLEANFILES =
 892 DISTCLEANFILES = $(am__append_1)
 893 MAINTAINERCLEANFILES =
 894
 895 # sed expression to strip leading directories from a filename; this converts e.g.,
 896 # src/foo/bar.so to bar.so.
 897 strip_leading_dirs = s|^.*/||
 898 @WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 899 @WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
 900
 901
 902 # define a snippet of the scripts below to either perform a chown/chmod operation,
 903 # or record that operation in the logfile.  On entry to the snippet, $$dest is the
 904 # destination directory, $$cmd is the srcdir-relative pathname of the target file,
 905 # $$chown is the ownership, and $$chmod is the permission pattern.
 906 @WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 907 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
 908 @WANT_INSTALLPERMS_TRUE@        echo chown "$$chown" "$$pa"; \
 909 @WANT_INSTALLPERMS_TRUE@        chown "$$chown" "$$pa" || exit 1; \
 910 @WANT_INSTALLPERMS_TRUE@    fi; \
 911 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
 912 @WANT_INSTALLPERMS_TRUE@        echo chmod "$$chmod" "$$pa"; \
 913 @WANT_INSTALLPERMS_TRUE@        chmod "$$chmod" "$$pa" || exit 1; \
 914 @WANT_INSTALLPERMS_TRUE@    fi
 915
 916 @WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
 917 INCLUDES = -I$(top_builddir)/common-src \
 918                 -I$(top_srcdir)/common-src \
 919                 -I$(top_srcdir)/gnulib
 920
 921 AM_CFLAGS = $(AMANDA_WARNING_CFLAGS)
 922 AM_LDFLAGS = $(AMANDA_STATIC_LDFLAGS)
 923 LINT = @AMLINT@
 924 LINTFLAGS = @AMLINTFLAGS@
 925 amlib_LTLIBRARIES = libamar.la
 926 libamar_la_SOURCES = amar.c
 927 libamar_la_LDFLAGS = -release $(VERSION)
 928 libamar_la_LIBADD = ../common-src/libamanda.la
 929 noinst_HEADERS = \
 930         amar.h
 931
 932 amarchiver_SOURCES = amarchiver.c
 933 amarchiver_LDADD = libamar.la
 934 amar_test_SOURCES = amar-test.c
 935 amar_test_LDADD = libamar.la \
 936         ../common-src/libtestutils.la
 937
 938 INSTALLPERMS_exec = \
 939         dest=$(sbindir) chown=amanda chmod=0750 $(sbin_PROGRAMS)
 940
 941 all: $(BUILT_SOURCES)
 942         $(MAKE) $(AM_MAKEFLAGS) all-am
 943
 944 .SUFFIXES:
 945 .SUFFIXES: .c .lo .o .obj
 946 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(top_srcdir)/config/automake/precompile.am $(am__configure_deps)
 947         @for dep in $?; do \
 948           case '$(am__configure_deps)' in \
 949             *$$dep*) \
 950               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 951                 && { if test -f $@; then exit 0; else break; fi; }; \
 952               exit 1;; \
 953           esac; \
 954         done; \
 955         echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu amar-src/Makefile'; \
 956         $(am__cd) $(top_srcdir) && \
 957           $(AUTOMAKE) --gnu amar-src/Makefile
 958 .PRECIOUS: Makefile
 959 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 960         @case '$?' in \
 961           *config.status*) \
 962             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 963           *) \
 964             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 965             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 966         esac;
 967
 968 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 969         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 970
 971 $(top_srcdir)/configure:  $(am__configure_deps)
 972         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 973 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 974         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 975 $(am__aclocal_m4_deps):
 976 install-amlibLTLIBRARIES: $(amlib_LTLIBRARIES)
 977         @$(NORMAL_INSTALL)
 978         test -z "$(amlibdir)" || $(MKDIR_P) "$(DESTDIR)$(amlibdir)"
 979         @list='$(amlib_LTLIBRARIES)'; test -n "$(amlibdir)" || list=; \
 980         list2=; for p in $$list; do \
 981           if test -f $$p; then \
 982             list2="$$list2 $$p"; \
 983           else :; fi; \
 984         done; \
 985         test -z "$$list2" || { \
 986           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(amlibdir)'"; \
 987           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(amlibdir)"; \
 988         }
 989
 990 uninstall-amlibLTLIBRARIES:
 991         @$(NORMAL_UNINSTALL)
 992         @list='$(amlib_LTLIBRARIES)'; test -n "$(amlibdir)" || list=; \
 993         for p in $$list; do \
 994           $(am__strip_dir) \
 995           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(amlibdir)/$$f'"; \
 996           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(amlibdir)/$$f"; \
 997         done
 998
 999 clean-amlibLTLIBRARIES:
1000         -test -z "$(amlib_LTLIBRARIES)" || rm -f $(amlib_LTLIBRARIES)
1001         @list='$(amlib_LTLIBRARIES)'; for p in $$list; do \
1002           dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
1003           test "$$dir" != "$$p" || dir=.; \
1004           echo "rm -f \"$${dir}/so_locations\""; \
1005           rm -f "$${dir}/so_locations"; \
1006         done
1007 libamar.la: $(libamar_la_OBJECTS) $(libamar_la_DEPENDENCIES)
1008         $(libamar_la_LINK) -rpath $(amlibdir) $(libamar_la_OBJECTS) $(libamar_la_LIBADD) $(LIBS)
1009
1010 clean-noinstPROGRAMS:
1011         @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
1012         echo " rm -f" $$list; \
1013         rm -f $$list || exit $$?; \
1014         test -n "$(EXEEXT)" || exit 0; \
1015         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
1016         echo " rm -f" $$list; \
1017         rm -f $$list
1018 install-sbinPROGRAMS: $(sbin_PROGRAMS)
1019         @$(NORMAL_INSTALL)
1020         test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
1021         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
1022         for p in $$list; do echo "$$p $$p"; done | \
1023         sed 's/$(EXEEXT)$$//' | \
1024         while read p p1; do if test -f $$p || test -f $$p1; \
1025           then echo "$$p"; echo "$$p"; else :; fi; \
1026         done | \
1027         sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
1028             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
1029         sed 'N;N;N;s,\n, ,g' | \
1030         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
1031           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
1032             if ($$2 == $$4) files[d] = files[d] " " $$1; \
1033             else { print "f", $$3 "/" $$4, $$1; } } \
1034           END { for (d in files) print "f", d, files[d] }' | \
1035         while read type dir files; do \
1036             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
1037             test -z "$$files" || { \
1038             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
1039             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
1040             } \
1041         ; done
1042
1043 uninstall-sbinPROGRAMS:
1044         @$(NORMAL_UNINSTALL)
1045         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
1046         files=`for p in $$list; do echo "$$p"; done | \
1047           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
1048               -e 's/$$/$(EXEEXT)/' `; \
1049         test -n "$$list" || exit 0; \
1050         echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
1051         cd "$(DESTDIR)$(sbindir)" && rm -f $$files
1052
1053 clean-sbinPROGRAMS:
1054         @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
1055         echo " rm -f" $$list; \
1056         rm -f $$list || exit $$?; \
1057         test -n "$(EXEEXT)" || exit 0; \
1058         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
1059         echo " rm -f" $$list; \
1060         rm -f $$list
1061 amar-test$(EXEEXT): $(amar_test_OBJECTS) $(amar_test_DEPENDENCIES)
1062         @rm -f amar-test$(EXEEXT)
1063         $(LINK) $(amar_test_OBJECTS) $(amar_test_LDADD) $(LIBS)
1064 amarchiver$(EXEEXT): $(amarchiver_OBJECTS) $(amarchiver_DEPENDENCIES)
1065         @rm -f amarchiver$(EXEEXT)
1066         $(LINK) $(amarchiver_OBJECTS) $(amarchiver_LDADD) $(LIBS)
1067
1068 mostlyclean-compile:
1069         -rm -f *.$(OBJEXT)
1070
1071 distclean-compile:
1072         -rm -f *.tab.c
1073
1074 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amar-test.Po@am__quote@
1075 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amar.Plo@am__quote@
1076 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amarchiver.Po@am__quote@
1077
1078 .c.o:
1079 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
1080 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
1081 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1082 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1083 @am__fastdepCC_FALSE@   $(COMPILE) -c $<
1084
1085 .c.obj:
1086 @am__fastdepCC_TRUE@    $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
1087 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
1088 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
1089 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1090 @am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
1091
1092 .c.lo:
1093 @am__fastdepCC_TRUE@    $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
1094 @am__fastdepCC_TRUE@    $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
1095 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
1096 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
1097 @am__fastdepCC_FALSE@   $(LTCOMPILE) -c -o $@ $<
1098
1099 mostlyclean-libtool:
1100         -rm -f *.lo
1101
1102 clean-libtool:
1103         -rm -rf .libs _libs
1104
1105 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1106         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1107         unique=`for i in $$list; do \
1108             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1109           done | \
1110           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1111               END { if (nonempty) { for (i in files) print i; }; }'`; \
1112         mkid -fID $$unique
1113 tags: TAGS
1114
1115 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1116                 $(TAGS_FILES) $(LISP)
1117         set x; \
1118         here=`pwd`; \
1119         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1120         unique=`for i in $$list; do \
1121             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1122           done | \
1123           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1124               END { if (nonempty) { for (i in files) print i; }; }'`; \
1125         shift; \
1126         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1127           test -n "$$unique" || unique=$$empty_fix; \
1128           if test $$# -gt 0; then \
1129             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1130               "$$@" $$unique; \
1131           else \
1132             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1133               $$unique; \
1134           fi; \
1135         fi
1136 ctags: CTAGS
1137 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1138                 $(TAGS_FILES) $(LISP)
1139         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1140         unique=`for i in $$list; do \
1141             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1142           done | \
1143           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1144               END { if (nonempty) { for (i in files) print i; }; }'`; \
1145         test -z "$(CTAGS_ARGS)$$unique" \
1146           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1147              $$unique
1148
1149 GTAGS:
1150         here=`$(am__cd) $(top_builddir) && pwd` \
1151           && $(am__cd) $(top_srcdir) \
1152           && gtags -i $(GTAGS_ARGS) "$$here"
1153
1154 distclean-tags:
1155         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1156
1157 check-TESTS: $(TESTS)
1158         @failed=0; all=0; xfail=0; xpass=0; skip=0; \
1159         srcdir=$(srcdir); export srcdir; \
1160         list=' $(TESTS) '; \
1161         $(am__tty_colors); \
1162         if test -n "$$list"; then \
1163           for tst in $$list; do \
1164             if test -f ./$$tst; then dir=./; \
1165             elif test -f $$tst; then dir=; \
1166             else dir="$(srcdir)/"; fi; \
1167             if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
1168               all=`expr $$all + 1`; \
1169               case " $(XFAIL_TESTS) " in \
1170               *[\ \     ]$$tst[\ \      ]*) \
1171                 xpass=`expr $$xpass + 1`; \
1172                 failed=`expr $$failed + 1`; \
1173                 col=$$red; res=XPASS; \
1174               ;; \
1175               *) \
1176                 col=$$grn; res=PASS; \
1177               ;; \
1178               esac; \
1179             elif test $$? -ne 77; then \
1180               all=`expr $$all + 1`; \
1181               case " $(XFAIL_TESTS) " in \
1182               *[\ \     ]$$tst[\ \      ]*) \
1183                 xfail=`expr $$xfail + 1`; \
1184                 col=$$lgn; res=XFAIL; \
1185               ;; \
1186               *) \
1187                 failed=`expr $$failed + 1`; \
1188                 col=$$red; res=FAIL; \
1189               ;; \
1190               esac; \
1191             else \
1192               skip=`expr $$skip + 1`; \
1193               col=$$blu; res=SKIP; \
1194             fi; \
1195             echo "$${col}$$res$${std}: $$tst"; \
1196           done; \
1197           if test "$$all" -eq 1; then \
1198             tests="test"; \
1199             All=""; \
1200           else \
1201             tests="tests"; \
1202             All="All "; \
1203           fi; \
1204           if test "$$failed" -eq 0; then \
1205             if test "$$xfail" -eq 0; then \
1206               banner="$$All$$all $$tests passed"; \
1207             else \
1208               if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
1209               banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
1210             fi; \
1211           else \
1212             if test "$$xpass" -eq 0; then \
1213               banner="$$failed of $$all $$tests failed"; \
1214             else \
1215               if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
1216               banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
1217             fi; \
1218           fi; \
1219           dashes="$$banner"; \
1220           skipped=""; \
1221           if test "$$skip" -ne 0; then \
1222             if test "$$skip" -eq 1; then \
1223               skipped="($$skip test was not run)"; \
1224             else \
1225               skipped="($$skip tests were not run)"; \
1226             fi; \
1227             test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
1228               dashes="$$skipped"; \
1229           fi; \
1230           report=""; \
1231           if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
1232             report="Please report to $(PACKAGE_BUGREPORT)"; \
1233             test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
1234               dashes="$$report"; \
1235           fi; \
1236           dashes=`echo "$$dashes" | sed s/./=/g`; \
1237           if test "$$failed" -eq 0; then \
1238             echo "$$grn$$dashes"; \
1239           else \
1240             echo "$$red$$dashes"; \
1241           fi; \
1242           echo "$$banner"; \
1243           test -z "$$skipped" || echo "$$skipped"; \
1244           test -z "$$report" || echo "$$report"; \
1245           echo "$$dashes$$std"; \
1246           test "$$failed" -eq 0; \
1247         else :; fi
1248
1249 distdir: $(DISTFILES)
1250         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1251         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1252         list='$(DISTFILES)'; \
1253           dist_files=`for file in $$list; do echo $$file; done | \
1254           sed -e "s|^$$srcdirstrip/||;t" \
1255               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1256         case $$dist_files in \
1257           */*) $(MKDIR_P) `echo "$$dist_files" | \
1258                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1259                            sort -u` ;; \
1260         esac; \
1261         for file in $$dist_files; do \
1262           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1263           if test -d $$d/$$file; then \
1264             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1265             if test -d "$(distdir)/$$file"; then \
1266               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1267             fi; \
1268             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1269               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1270               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1271             fi; \
1272             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1273           else \
1274             test -f "$(distdir)/$$file" \
1275             || cp -p $$d/$$file "$(distdir)/$$file" \
1276             || exit 1; \
1277           fi; \
1278         done
1279 check-am: all-am
1280         $(MAKE) $(AM_MAKEFLAGS) check-TESTS
1281 check: $(BUILT_SOURCES)
1282         $(MAKE) $(AM_MAKEFLAGS) check-am
1283 all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
1284 installdirs:
1285         for dir in "$(DESTDIR)$(amlibdir)" "$(DESTDIR)$(sbindir)"; do \
1286           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1287         done
1288 install: $(BUILT_SOURCES)
1289         $(MAKE) $(AM_MAKEFLAGS) install-am
1290 install-exec: install-exec-am
1291 install-data: install-data-am
1292 uninstall: uninstall-am
1293
1294 install-am: all-am
1295         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1296
1297 installcheck: installcheck-am
1298 install-strip:
1299         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1300           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1301           `test -z '$(STRIP)' || \
1302             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1303 mostlyclean-generic:
1304         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
1305
1306 clean-generic:
1307         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1308
1309 distclean-generic:
1310         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1311         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1312         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1313
1314 maintainer-clean-generic:
1315         @echo "This command is intended for maintainers to use"
1316         @echo "it deletes files that may require special tools to rebuild."
1317         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1318         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1319 clean: clean-am
1320
1321 clean-am: clean-amlibLTLIBRARIES clean-generic clean-libtool \
1322         clean-noinstPROGRAMS clean-sbinPROGRAMS mostlyclean-am
1323
1324 distclean: distclean-am
1325         -rm -rf ./$(DEPDIR)
1326         -rm -f Makefile
1327 distclean-am: clean-am distclean-compile distclean-generic \
1328         distclean-tags
1329
1330 dvi: dvi-am
1331
1332 dvi-am:
1333
1334 html: html-am
1335
1336 html-am:
1337
1338 info: info-am
1339
1340 info-am:
1341
1342 install-data-am: install-amlibLTLIBRARIES
1343         @$(NORMAL_INSTALL)
1344         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1345 install-dvi: install-dvi-am
1346
1347 install-dvi-am:
1348
1349 install-exec-am: install-sbinPROGRAMS
1350         @$(NORMAL_INSTALL)
1351         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1352 install-html: install-html-am
1353
1354 install-html-am:
1355
1356 install-info: install-info-am
1357
1358 install-info-am:
1359
1360 install-man:
1361
1362 install-pdf: install-pdf-am
1363
1364 install-pdf-am:
1365
1366 install-ps: install-ps-am
1367
1368 install-ps-am:
1369
1370 installcheck-am:
1371
1372 maintainer-clean: maintainer-clean-am
1373         -rm -rf ./$(DEPDIR)
1374         -rm -f Makefile
1375 maintainer-clean-am: distclean-am maintainer-clean-generic
1376
1377 mostlyclean: mostlyclean-am
1378
1379 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1380         mostlyclean-libtool
1381
1382 pdf: pdf-am
1383
1384 pdf-am:
1385
1386 ps: ps-am
1387
1388 ps-am:
1389
1390 uninstall-am: uninstall-amlibLTLIBRARIES uninstall-sbinPROGRAMS
1391
1392 .MAKE: all check check-am install install-am install-data-am \
1393         install-exec-am install-strip
1394
1395 .PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
1396         clean-amlibLTLIBRARIES clean-generic clean-libtool \
1397         clean-noinstPROGRAMS clean-sbinPROGRAMS ctags distclean \
1398         distclean-compile distclean-generic distclean-libtool \
1399         distclean-tags distdir dvi dvi-am html html-am info info-am \
1400         install install-am install-amlibLTLIBRARIES install-data \
1401         install-data-am install-data-hook install-dvi install-dvi-am \
1402         install-exec install-exec-am install-exec-hook install-html \
1403         install-html-am install-info install-info-am install-man \
1404         install-pdf install-pdf-am install-ps install-ps-am \
1405         install-sbinPROGRAMS install-strip installcheck \
1406         installcheck-am installdirs maintainer-clean \
1407         maintainer-clean-generic mostlyclean mostlyclean-compile \
1408         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1409         tags uninstall uninstall-am uninstall-amlibLTLIBRARIES \
1410         uninstall-sbinPROGRAMS
1411
1412
1413 installperms-exec:
1414         @installperms="$(INSTALLPERMS_exec)"; \
1415         test -n "$$installperms" && echo "Setting installation permissions on executables"; \
1416         dest=; chown=; chmod=; \
1417         for cmd in $$installperms; do \
1418             case "$$cmd" in \
1419                 chown=amanda) \
1420                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1421                 dest=*|chown=*|chmod=*) \
1422                         echo "  ($$cmd)"; eval $$cmd;; \
1423                 *) $(do_file) ;; \
1424             esac; \
1425         done
1426
1427 installperms-data:
1428         @installperms="$(INSTALLPERMS_data)"; \
1429         dest=; chown=; chmod=; \
1430         for cmd in $$installperms; do \
1431             case "$$cmd" in \
1432                 chown=amanda) \
1433                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1434                 dest=*|chown=*|chmod=*) \
1435                         echo "  ($$cmd)"; eval $$cmd;; \
1436                 *)  $(do_file) ;; \
1437             esac; \
1438         done
1439
1440 install-exec-hook: installperms-exec
1441 install-data-hook: installperms-data
1442
1443 # define a rule to initialize the installperms manifest file
1444 @WANT_INSTALLPERMS_TRUE@installperms-init:
1445 @WANT_INSTALLPERMS_FALSE@installperms-init:
1446 @WANT_INSTALLPERMS_FALSE@       rm -f "$(installperms_sh)"
1447
1448 # A rule to make precompiler output from C files.  This is not used during
1449 # ordinary builds, but but can very useful in debugging problems on strange
1450 # architectures.  With this rule, we can ask users to 'make foo.i' and send
1451 # the result to us.
1452 #
1453 # It touches some automake internals ($COMPILE), but since it's not
1454 # build-critical, that's OK.
1455 %.i : %.c
1456         $(COMPILE) -E -o $@ $<
1457
1458 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1459 # Otherwise a system limit (for SysV at least) may be exceeded.
1460 .NOEXPORT: