1 Changes in release 2.6.0p2
4 o Various device-api fix
5 o Compilation on various platform
8 Changes in release 2.6.0p1
13 o Fix DS_INCRONLY and FORCE_FULL
17 Changes in release 2.6.0
19 * configure --disable-shared doesn't work because perl modules require
20 shared libraries. Use configure --with-static-binaries to build
21 statically linked binaries.
22 * 'amverify' and 'amverifyrun' are deprecated and replaced with the
23 new, more flexible 'amcheckdump'
24 * 'amdd' and 'ammt' are deprecated.
25 * Some Amanda files are now installed in new "amanda/" subdirectories:
26 libraries are now installed in $libdir/amanda and internal programs
27 are now installed in $libexecdir/amanda. You can set --with-amlibdir
28 and --with-amlibexecdir if you don't want the amanda suffix.
29 If you mix 2.6.0 and earlier version with rsh/ssh auth, you need to
30 add an 'amandad_path' to the dumptype and to amanda-client.conf
31 * The amandates file, previously at /etc/amandates, is now at
32 $localstatedir/amanda/amandates. You may want to move your existing
33 /etc/amandates when you upgrade Amanda.
34 * New 'amcryptsimple', 'amgpgcrypt' - encryption plugins based on gpg.
35 * New 'amserverconfig', 'amaddclient' - Initial Amanda configuration tools
36 these tools make assumptions, please see man page.
37 * Many bugs fixed and code rewrite/cleanup.
38 Speedup in 'amrecover find' and starting amrecover.
39 * glib is required to compile and run amanda.
40 * Device API: pluggable interface to storage devices, supporting tapes,
41 vtapes, RAIT, and Amazon S3
42 * New perl modules link directly to Amanda, to support writing Amanda
43 applications in Perl. Perl module are installed by default in the perl
44 installsitelib directory. It can be changed with
45 'configure --with-amperldir'.
46 * New 'local' security driver supports backups of the amanda server
47 without any network connection or other configuration.
48 * Almost 200 unit tests are available via 'make installcheck'.
49 * Amanda configuration file changes
51 + flush-threshold-dumped
52 + flush-threshold-scheduled
55 + usetimestamps default to yes
57 Changes in release 2.5.2p1
61 + missing sockaddr_storage
62 + missing AI_V4MAPPED and AI_ALL
63 + compare of IPv4 and IPv6 v4mapped address.
64 + (bsd/bsdudp): server use two sockets,
65 one for IPv4 and one for IPv6
69 o compilation on some platform
72 Changes in release 2.5.2
74 * Many bugs fixed and code cleanup
75 * krb5 auth is working
76 * Works with IPv6 address
77 * Amanda configuration file changes
79 + debugging is enabled in the config file
80 see all debug_* config option
81 + tapetype 'readblocksize', if maxtapeblocksize is set too
82 larger for your hardware
84 Changes in release 2.5.1p3
87 * amrecover improve handling of not ascii filename in index.
88 * Works with tar-1.16 and exit status of 1.
89 * Can define a LASTSLOT in a chg-disk config file.
92 Changes in release 2.5.1p2
95 * amoverview is working
96 * dumptype starttime is working
98 * Amanda command changes
99 o amtape accept the -o arguments
100 o amgetconf --list to list all tapetype, dumptype, holdingdisk
102 o amgetconf can return a value of a specific tapetype, dumptype,
103 holdingdisk or interface
106 Changes in release 2.5.1p1
109 o Timeout waiting for ACK
110 o "illegal density" with dump
111 o IRIX: Parse config file, amrecover
113 o amrecover with FreeBSD/OpenBSD
114 * Some other small cleanup.
115 * Remove contrib/sst.
118 Changes in release 2.5.1
120 * Defects found by Coverity scan and Klocwork K7 analysis tools fixed.
121 * Works with GNU tar 1.15.91 - work with new gtar state file format.
122 * Open SSL encryption support
123 * Two new authentication methods: bsdtcp, bsdudp.
124 * Unlimited number of DLEs on a client with bsdtcp, rsh and ssh
125 authentication methods.
126 * Recovery process amrecover uses Secure API. amoldrecover command
127 (same syntax and functionality as amrecover command) is provided for
128 compatibility with old Amanda releases. amoldrecover command uses old
129 amidxtaped/amindexd protocol.
130 * Amanda debug files are separated into client/server/amandad and
131 are also classified based on Amanda configuration name.
133 * Amanda command changes
134 o amfetchdump -o is replaced by -O.
135 o amcheck -w option does all tests including the tape writable test.
136 Use amcheck -t -w to do only the tape writable test.
137 o -o command option to override Amanda configuration. See amanda man
139 o amgetconf command doesn't write the BUGGY message when a entry
140 is not found in the configuration file.
142 * Amanda configuration file changes
143 o amanda.conf changes
144 + amrecover_do_fsf in amanda.conf defaults to yes
145 + amrecover_check_label in amanda.conf defaults to yes
146 + usetimestamps in amanda.conf to support multiple
147 backup runs in a calendar day.
148 + holdingdisk in amanda.conf supports new values:
149 NEVER, AUTO, REQUIRED.
150 + amandad_path, client_username and ssh_keys in
151 amanda.conf for ssh/rsh authentication.
152 o New amanda client configuration file - amanda-client.conf.
153 Different client configuration file can be used for each Amanda
155 + gnutar_list-dir and amandates can be specified in
156 Amanda client configuration file - amanda-client.conf
157 o .amandahosts format changes to allow use of secure API for recovery.
158 o Amanda service entries in xinetd configuration has changed.
161 Changes in release 2.5.0p2
163 * listhost subcommand in amrecover
165 Changes in release 2.5.0p1
167 * Add the 'amtape update' command.
169 Changes in release 2.5.0
171 * Communication security/authentication: Kerberos 4/5, OpenSSH
172 * Data security: Symmetric/Assymetric encrytion algorithms (aesutil
173 and gpg encryption), Encryption can be done on server or client,
174 Custom encryption utilities can be used.
175 * Compression: Ability to add custom compression tools. This is a
176 really useful feature especially since it can specified for a DLE. You
177 can use different compression algorithm for images, binaries, ascii files
179 * Dump images spanning multiple media volumes - Dump images are no
180 longer restricted to a single media volume (tape or vtape). Data restoration
181 can be done using amrecover and amfetchdump commands.
182 * Auto tape labelling - This optional feature is good for disk backups.
184 Change in release 2.4.5p1
186 * New [--days <num>] argument to 'amadmin <conf> tape'.
187 * New amoverview -last -num0 -togo0 options.
189 Change in release 2.4.5
191 * new displayunit global option to select the unit use to display number
192 k=kilo, m=mega, g=giga, t=tera.
193 * new amoverview -skipmissed option.
195 Change in release 2.4.5b1
197 * holding disk disk use timestamped directory.
198 * autoflush flush today's dump.
199 * new bumppercent global option, this should improve bumping criteria,
200 the bumpsize is set to a fixed value which can be adequate for small
202 * bumpsize, bumppercent, bumpdays and bumpmult can be in a dumptype.
203 * calcsize support include and exclude like gnutar.
204 * new 'estimate' dumptype option to select estimate type:
205 CLIENT: estimate by the dumping program.
206 CALCSIZE: estimate by the calcsize program, a lot faster but less acurate.
207 SERVER: estimate based on statistic from previous run, take second but
208 can be wrong on the estimate size.
210 Changes in release 2.4.4p3
212 * new chg-iomega changer script.
213 * amanda will not use a tape if it's label is not in the tapelist file
214 (eg. after an amrmtape).
216 Changes in release 2.4.4p2
218 * new initial_poll_delay config in chg-zd-mtx
219 * 'amadmin find' list disk removed from the disklist.
220 * amrecover can recover a disk removed from the disklist file.
221 * amanda works with samba3.
222 * new chg-disk changer script to use with the file: driver.
223 * Kerberos 4 support integrated and functional again.
225 Changes in release 2.4.4p1
227 * amverify do not advance to next tape at the end.
228 * new amflush -b and -s options, change -f behavior.
229 * new chg-mcutil changer.
230 * amrecover_changer works with chg-multi.
231 * default driveslot for chg-zd-mtx is now 0.
232 * amplot generate color postscript by default.
233 * amplot -b flag to generate b/w postscript.
234 * rait: works with file:
235 * print a postscript label for each tape used.
237 Changes in release 2.4.4
239 * New -a option to amcheck to always send an email.
241 Changes in release 2.4.4b1
243 * maxpromoteday: New option for a dumptype.
244 * New amtapetype program (replace tapetype)
245 * Client compile on CYGWIN
246 * amrestore -f <fileno> : amrestore can do fsf before reading the tape
247 * amrestore -l <label> : amrestore can check the label before restoring.
248 * New config options:
249 amrecover_do_fsf: Amrecover will use the -f flag of amrestore to position the
251 amrecover_check_label: amrecover will pass the -l flag to amrestore.
252 amrecover_changer: amrecover will use your changer.
253 maxdumpsize: The maximum size of the dumps during a run,
254 default to tapesize * runtapes
255 taperalgo: select your algo for the taper, try 'largestfit', it can improve
257 * amrecover allow to retry a skip a tape.
258 * New --days option to 'amadmin <config> balance' command.
259 * New --date option to amstatus
260 * amreport print an usage by tape.
261 * Newer promote algorithm that try to reduce the number of full on a
262 single host in a run.
263 * New changer: chg-juke, chg-null and chg-rait
265 Changes in release 2.4.3
267 * Few small bug fixed
268 * New runtapes argument to amverify.
269 * New amverifyrun program.
270 * 2.4.3 client works with older server.
272 Changes in release 2.4.3b4
274 * new noop packet type. It allow the server to know the client features.
275 * exclude list with relative path is working again.
276 * amstatus is working again.
278 Changes in release 2.4.3b3
280 * --with-maxtapeblocksize configure options
281 * blocksize tapetype option
282 * file-pad tapetype option
283 * Multiple exclude in dumptype
284 * Option include in dumptype
285 * New disklist syntax:
286 * hostname diskname [ diskdevice ] dumptype [ spindle [ interface ] ]
287 * chg-zd-mtx: Major cleanup and general overhaul.
288 * amrecover: new listdisk command.
290 Changes in release 2.4.3b2
292 * amrestore try to find the next chunk in the current directory.
293 * amrecover: You can change the tape device between each tape.
294 * amstatus work with amflush.
296 Changes in release 2.4.3b1
299 * New [host [disk]*]* arguments to amdump, amcheck, amadmin and amflush.
300 * New [-D datastamp]* arguments to amflush.
301 * amrecover: cd accept shell wildcard, new command cdx accept regex.
302 * new autoflush option.
303 * new dumperstr option to specify the priority order of each dumper.
305 Changes in release 2.4.2
307 * Samba passwords are now sent to smbclient via a pipe and never displayed.
308 * Debug files in /tmp/amanda (--with-debug-dir) are now timestamped and old
309 ones automatically cleaned out. This means more space (a few KBytes) will
310 be used since in a given run, several of the programs are called more than
311 once. But it also means important debugging information should no longer
312 be lost by the file being overwritten. The length of time to keep the
313 files is controlled by --with-debug-days (default: 4). The old flag
314 --with-pid-debug-files is no longer needed and is ignored.
315 * dumptypes can be specialized in the disklist file
316 * Amanda will never use more space than specified (use) for an holding
318 * A dump on holding disk can spread multiple holding disks
319 * negative chunksize is no longer supported
320 * chunksize is now 1 Gb by default
321 * ufsdump -S is now supported on Solaris
322 * Samba 2.0.0 is now supported
323 * New `incronly' strategy, similar to skip-full, but allows manual
324 scheduling of full backups
325 * chg-scsi was ported to several platforms
326 * --with-amandahosts is now enabled by default
327 * new force-bump, force-no-bump and unforce-bump command in amadmin.
328 * Increased the maximum number of filesystems that can be backed up
329 from a single host, by increasing the maximum UDP request packet
331 * A new `dtimeout' keyword in amanda.conf to replace the READ_TIMEOUT
332 constant in dumper.c.
333 * A new `ctimeout' keyword in amanda.conf to replace the CHECK_TIMEOUT
334 constant in amcheck.c.
335 * new amtrmlog command
336 * --with-samba-user is deprecated, the username go in the amandapass file
338 Changes in release 2.4.1
340 * FAQ for new users, in docs/FAQ.
341 * A new `runspercycle' keyword in amanda.conf to specify the number
342 of amdump runs in a dumpcycle. The default is one run every day.
343 A value of 0 (the default) means the same value as dumpcycle.
344 A value of -1 means guess the number of runs from the tapelist file,
345 which is the number of tape used in the last dumpcycle days / runtapes.
346 If you don't run amdump every days, you must set runspercycle
347 otherwise amanda will noy be able to balance the dump. You must
348 set runspercycle to -1 if you want the same behavior as previous
350 * Space to be use as holding disk can now be "use all space except ??? Kb"
351 using a negative value for the 'use' parameter.
352 * amrecover will restore SAMBA backups using SAMBA.
353 * New `amstatus' program.
354 * New `chg-scsi' tape changer program, that replaces `chg-chio' and uses
355 tape-changer-related ioctls on OSs that support them.
356 * Reporter can now print tape labels.
357 * ZFTAPEs are now supported on Linux.
358 * amrestore now accepts a list of filesystems to be restored.
359 * New `clean' amtape command.
360 * amlabel will only overwrite an Amanda tape if `-f' is specified.
361 * Tapes can now be marked so as not to be recycled with amadmin no-reuse.
362 * amidxtrm will no longer remove index files of backups in active tapes.
363 * Large dumps can now be split into multiple files on holding disk
364 (but they won't span across tapes yet).
365 * A total estimate time-out may be specified.
366 * Fixed skip-incr and skip-full support.
367 * amcheck now accepts -Maddress to send e-mail to the specified address.
368 * amdump, amflush and amcheck will use the log files as locks, so as
369 to avoid running concurrently.
370 * driver now supports configurable level-0 dumps in degraded mode via
371 new amanda.conf keyword "reserve"; see docs/WHATS.NEW for details.
372 * Configure now looks for vxdump and vxrestore in /usr/lib/fs/vxfs for Solaris
373 systems and will use it vxdump/vxrestore automatically on vxfs filesystems.
374 * New `killpgrp' setuid-root program, that kills estimate dumps even
375 if they are setuid-root.
377 Changes in release 2.4.0p1
379 * Fixed kerberos encryption
380 * New --with-owner configure option, to specify owner of installed files
381 * amcheck now checks for the existence of gnutar-listdir and of a
382 compressor on the server (for indexes and server compression)
383 * Implemented dumptype option `strategy skip'
384 * Updated to libtool 1.2a
385 * Minor portability-related bugfixes.
387 Changes in release 2.4.0
389 * Several security-related fixes, see docs/SECURITY for details.
390 * New configuration file syntax: dumptypes can now be used as keywords.
391 * New text database format, to replace dbm/ndbm/gdbm/db databases with
392 a more portable and user-friendly format.
393 * Index files are now sent through a separate TCP connection, as they
394 are generated, instead of being stored in /tmp. This breaks Amanda
395 protocol backward compatibility.
396 * Estimates are now performed concurrently, if maxdumps>1.
397 * At configure time, it is now possible to specify a suffix for amanda
398 service names (--with-testing=suffix) and a directory for debugging
399 files (--with-debugging=/directory/name)
400 * New tape changer configuration keywords, that partially standardize
401 tape changer script configuration interface.
402 * amrecover can now handle GNU tar and AIX dump restores; it must now
404 * Shared libraries are built by default, using GNU libtool.
405 * Extended regular expression syntax has been adopted.
406 * amcheck will no longer report failures about unused programs.
407 * It is now possible to specify a SAMBA username at configure time.
408 * BSD security is now enabled by default.
409 * A time-out for estimate requests can now be specified in amanda.conf.
410 * New patch-system script, for editing /etc/services and /etc/inetd.conf.
411 * Amdump will wait if a file named `hold' exists in the log directory.
412 * Various bugfixes and new ports.
414 Changes in release 2.3.0.4
415 * New chg-generic.conf option 'multieject' added which lets
416 chg-generic work on tape drives that need multiple 'mt offline'
417 commands. See examples/chg-generic.conf for more information.
418 * New configure options:
419 --with-db=DBLIB Force database library choice from {db,dbm,gdbm,ndbm}
420 --enable-buffered-dump Use buffered sockets on server for faster dumps
421 --with-group=GROUPNAME Install all files into group GROUPNAME
422 * Include the file seagate-changer.c which controls
423 Seagate/Conner/Archive autoloading DAT drive on NetBSD systems.
424 * Add a new amanda.conf option named "starttime" which is used in the
425 dumptype configuration. It takes one argument which is a time of day
426 (local timezone) formated as either hhmm or hmm (no `.'s, no `:'s,
427 just an integer). This tells Amanda to start a particular dump at
429 * Index files are now retrieved from the clients through amandad, not rsh/rcp.
430 * Fix configure bug when multiple invocations would not do the correct things.
431 * Better fully qualified domain name support.
432 * Many little dumper fixes.
433 * Remove C style comments from amrmtape and fix a bug when there is
434 only one tape in the tapelist.
435 * More declarations of Unix system functions for those OSes that do not
437 * Fix --with-mmap configure bug.
439 Changes in release 2.3.0.4b3
440 * Include amplot-2.2.6 which makes plots of the amdump files for performance
441 improvements. Amplot requires gnuplot and a version of awk that
442 understands command line variable assignment.
443 * Include amoverview which creates a list of each disk dumped and the level
444 and success or failure of those dumps over a complete tapecycle.
445 * Amanda now supports backups of clients in different domains. Requires
446 using the configure --with-fqdn options and fully qualified domain
447 names (FQDNs) in the disklist file.
448 * rth-changer checks all system calls for valid returns.
449 * no-changer and hp-changer use different status files and do more checking.
450 * amrestore works again with gzip compressed tapes.
451 * New setuid program rundump for systems where dump must run as root.
452 * Setuid programs are now installed o-rwx for tighter security.
453 * Fix bug where if Amanda was not configured using the --with-bsd-security
454 configure option, Amanda would not connect to the client machines. This
456 * Rundump and runtar now check if the proper user is invoking them.
457 * Amanda now can use gdbm if the compatibility header files are not installed.
458 * Bug fixes for gnutar file exclusions.
459 * Fix bug in sendsize which would loop forever if debugging was not turned on.
460 * Bug fixes in Samba code.
461 * More configure and bug fixes for HP-UX, m88k-motorola-sysv4, SGI, OSF, and
464 Changes in release 2.3.0.4b2
465 * New tape changer script (rth-changer) for the Robotic Tape Handling system.
466 * Include amindex-1.0 from Alan McIvor.
467 * Gnutar incrementals should now work.
468 * amgetidx now caches if a remote client is reachable.
469 * amanda.conf settings used before --with-dbdir and --with-logdir settings
471 * New configure options:
472 --with-mmap force mmap() instead of shared memory
473 --with-gnutar-listed-incremental=DIR gnutar directory lists go in DIR
474 --enable-gnutar-atime-preserve gnutar preserves atime, do not use
475 --with-pid-debug-files use pid in /tmp debugging filenames
476 * Samba support must now be explicitly included using --with-smblcient.
477 * Amanda now compiles with K&R compilers.
478 * Better AIX, Linux, OSF support.
479 * configure checks if /dev/r devices exist or not.
480 * Amanda uses POSIX fcntl locking before flock or lockf locking if available.
481 * dumper.c uses less aggressive I/O values for SunOS server support.
482 * Many bug fixes in the configure script for various platforms.
483 * Many bug fixes to codes.
485 Changes in release 2.3.0.4b1
486 * Configuration now uses configure. Build environment now uses
487 automake and autoconf.
488 * Samba PC client backup support added.
489 * New programs and scripts:
490 amrmtape: invalidate the contents of an existing backup tape
491 amverify: check Amanda tapes for gnutar driven backups.
492 hp-changer: script for a HP DAT changer.
493 no-changer: make a single tape appear like an infinite count tape stacker.
494 * New options added to programs:
495 amadmin: `amadmin <conf> version' shows version information.
496 amtape: `amtape <conf> current' shows the current tape label,
497 * Amanda now supports server side compression of dumps on the tape
498 host. Use the srvcompress option in amanda.conf.
499 * Better gnutar support for indexing. Amanda now lets you exclude
501 * Tape planning improvements.
502 * Email reports have better formating for disks with long mount points.
503 * Tighter DNS checking added to amandad.
504 * More debugging added to several programs.
505 * Amdump now calls amgetidx and amtrmidx.
506 * Better support for multidomain environments.
507 * Contains amindex-0.3 from Alan McIvor.
508 * Many bug fixes and compiler warnings handled.
510 Changes in release 2.3.0.3
511 * Amadmin uses regular expression matching to match disks.
512 * Expand the column width of the disk names from reporter.
513 * Contains amindex-0.2 from Alan McIvor.
516 Changes in release 2.3.0.2
519 Changes in release 2.3.0.1
520 * Contains amindex-0.1 from Alan McIvor.
523 Changes in release 2.3.0 alpha
524 * A number of material bugs fixed, including fixes incorporated into
525 John Stoffel's WPI patches to amanda, which he called 2.2.6.5.
526 * Backup files larger than 2 GB now supported. The current limit is
527 2^31 Kbytes (2 terabytes), which should hold us for a few more years
529 * Support for GNUTAR-based backups.
530 * Support for writing to multiple tapes (sequentially) in one run.
531 * Support for multiple backups in parallel from the same client host.
532 * Records from the curinfo database can be exported and imported
533 to/from a textual format. This allows fixing a corrupted database by
534 running the text version through a script and reimporting it.
535 Individual records or the entire database can be exported/imported.
537 Changes in release 2.2.6
538 * A number of material bugs fixed.
539 * A lot of lint picked in the whole package.
540 * The documentation is now reasonably up to date.
541 * This version has been locally compiled and at least the client side
542 tested on the following systems:
544 Solaris 2.3 BSDI BSD/386 1.1
545 Ultrix 4.2 NetBSD 1.0
546 DEC OSF/1 2.0 AIX 3.2
547 I don't have any HP/UX machines locally to try it on, but I've
548 tracked patches submitted by Neal Becker <neal@ctd.comset.com>, so
549 I'm reasonably confident that 2.2.6 shouldn't be far from the mark on
552 Changes in release 2.2.5
553 * SYSV shared memory no longer required on server side if mmap is
555 * Supports GZIP compression.
556 * Supports use of mount names as well as device names in disk list
557 (eg "/usr" instead of "sd0g").
558 * Amanda now thinks in real-time - you may run it several times a day
559 if you wish, and it won't get confused.
560 * Supports Kerberos 4 security as well as BSD-style .rhosts, including
561 encrypting files over the net. The Kerberos support is available as
562 a separate add-on package - see the file KERBEROS.HOW-TO-GET on the
564 * Improved network protocol - faster startup, no longer dump specific,
565 hooks in place for non-dump clients.
566 * Client-side checks in amcheck - can check sanity of all client hosts
568 * Supports multiple holding disks, and load balances between them.