git.gag.com Git - debian/amanda/blob - Makefile.in

   1 # Makefile.in generated by automake 1.11 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # vim:ft=automake
  19 # Copyright (c) 2005-2008 Zmanda Inc.  All Rights Reserved.
  20 #
  21 # This library is free software; you can redistribute it and/or modify it
  22 # under the terms of the GNU Lesser General Public License version 2.1 as
  23 # published by the Free Software Foundation.
  24 #
  25 # This library is distributed in the hope that it will be useful, but
  26 # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  27 # or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
  28 # License for more details.
  29 #
  30 # You should have received a copy of the GNU Lesser General Public License
  31 # along with this library; if not, write to the Free Software Foundation,
  32 # Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA.
  33 #
  34 # Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
  35 # Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
  36
  37 # simple include file to pre-define variables which are then +='d by other
  38 # scripts in this directory.
  39
  40 # vim:ft=automake
  41 #
  42 # Adjust post-install permissions settings.  This rule works off two
  43 # specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data.
  44 # Each is a whitespace-separated list of commands, all of which are either
  45 # a variable assignment or a filename.  Three variables are available:
  46 #
  47 #  - dest= sets the destination directory to e.g., $(sbindir)
  48 #  - chown= controls changes in ownership; value is first argument to chown
  49 #  - chmod= controls changes in permissions; value is first argument to chmod
  50 #
  51 # As a special case, chown=amanda is taken as equivalent to
  52 # chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
  53 # whitespace in the user/group names.
  54 #
  55 # when a filename is seen, the currently active variables are applied.
  56 #
  57 # Note that scripts are data, not executables!
  58 #
  59 # EXAMPLE
  60 #
  61 # sbin_PROGRAMS = foo bar bing
  62 # libexec_PROGRAMS = pro gram
  63 # sbin_SCRIPTS = sk ript
  64 # INSTALLPERMS_exec = \
  65 #       dest=$(sbindir) chown=amanda chmod= \
  66 #               foo bar \
  67 #       chmod=07450 \
  68 #               bing
  69 #       dest=$(libexecdir) chmod= \
  70 #               $(libexec_PROGRAMS)
  71 # INSTALLPERMS_data = \
  72 #       dest=$(sbindir) chown=amanda chmod= \
  73 #               $(sbin_SCRIPTS)
  74 #
  75 # This whole operation is not required when making builds for packaging,
  76 # and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
  77 # AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
  78 # build directory is populated with a format suitable for shell interpretation,
  79 # with lines like this:
  80 #   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
  81 # the arguments being, respectively, owner:group, mode, and filename.  There will
  82 # be exactly one line for each file which has specific permissions.  The intention
  83 # is that this file be used by packaging scripts to set correct permissions at install
  84 # time.  Note that files which have no special permissions requirements do not appear
  85 # in this file at all, due to limitations of Automake.
  86
  87 VPATH = @srcdir@
  88 pkgdatadir = $(datadir)/@PACKAGE@
  89 pkgincludedir = $(includedir)/@PACKAGE@
  90 pkglibdir = $(libdir)/@PACKAGE@
  91 pkglibexecdir = $(libexecdir)/@PACKAGE@
  92 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  93 install_sh_DATA = $(install_sh) -c -m 644
  94 install_sh_PROGRAM = $(install_sh) -c
  95 install_sh_SCRIPT = $(install_sh) -c
  96 INSTALL_HEADER = $(INSTALL_DATA)
  97 transform = $(program_transform_name)
  98 NORMAL_INSTALL = :
  99 PRE_INSTALL = :
 100 POST_INSTALL = :
 101 NORMAL_UNINSTALL = :
 102 PRE_UNINSTALL = :
 103 POST_UNINSTALL = :
 104 build_triplet = @build@
 105 host_triplet = @host@
 106 target_triplet = @target@
 107 DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 108         $(srcdir)/Makefile.in \
 109         $(top_srcdir)/config/automake/installperms.am \
 110         $(top_srcdir)/config/automake/vars.am $(top_srcdir)/configure \
 111         $(top_srcdir)/example/template.d/advanced.conf.in \
 112         $(top_srcdir)/example/template.d/amanda-S3.conf.in \
 113         $(top_srcdir)/example/template.d/amanda-harddisk.conf.in \
 114         $(top_srcdir)/example/template.d/amanda-single-tape.conf.in \
 115         $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in \
 116         AUTHORS ChangeLog INSTALL NEWS
 117 @WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
 118 subdir = .
 119 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 120 am__aclocal_m4_deps =  \
 121         $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
 122         $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
 123         $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
 124         $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
 125         $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
 126         $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
 127         $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
 128         $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
 129         $(top_srcdir)/config/macro-archive/xsltproc.m4 \
 130         $(top_srcdir)/config/amanda/amplot.m4 \
 131         $(top_srcdir)/config/amanda/bsd-security.m4 \
 132         $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
 133         $(top_srcdir)/config/amanda/bsdudp-security.m4 \
 134         $(top_srcdir)/config/amanda/changer.m4 \
 135         $(top_srcdir)/config/amanda/components.m4 \
 136         $(top_srcdir)/config/amanda/compress.m4 \
 137         $(top_srcdir)/config/amanda/config.m4 \
 138         $(top_srcdir)/config/amanda/debugging.m4 \
 139         $(top_srcdir)/config/amanda/defaults.m4 \
 140         $(top_srcdir)/config/amanda/devprefix.m4 \
 141         $(top_srcdir)/config/amanda/dirs.m4 \
 142         $(top_srcdir)/config/amanda/documentation.m4 \
 143         $(top_srcdir)/config/amanda/dumpers.m4 \
 144         $(top_srcdir)/config/amanda/flags.m4 \
 145         $(top_srcdir)/config/amanda/flock.m4 \
 146         $(top_srcdir)/config/amanda/funcs.m4 \
 147         $(top_srcdir)/config/amanda/getfsent.m4 \
 148         $(top_srcdir)/config/amanda/i18n.m4 \
 149         $(top_srcdir)/config/amanda/ipv6.m4 \
 150         $(top_srcdir)/config/amanda/krb4-security.m4 \
 151         $(top_srcdir)/config/amanda/krb5-security.m4 \
 152         $(top_srcdir)/config/amanda/lfs.m4 \
 153         $(top_srcdir)/config/amanda/libs.m4 \
 154         $(top_srcdir)/config/amanda/net.m4 \
 155         $(top_srcdir)/config/amanda/progs.m4 \
 156         $(top_srcdir)/config/amanda/ps.m4 \
 157         $(top_srcdir)/config/amanda/readdir.m4 \
 158         $(top_srcdir)/config/amanda/readline.m4 \
 159         $(top_srcdir)/config/amanda/rsh-security.m4 \
 160         $(top_srcdir)/config/amanda/s3-device.m4 \
 161         $(top_srcdir)/config/amanda/shmem.m4 \
 162         $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
 163         $(top_srcdir)/config/amanda/ssh-security.m4 \
 164         $(top_srcdir)/config/amanda/summary.m4 \
 165         $(top_srcdir)/config/amanda/swig.m4 \
 166         $(top_srcdir)/config/amanda/syshacks.m4 \
 167         $(top_srcdir)/config/amanda/tape.m4 \
 168         $(top_srcdir)/config/amanda/types.m4 \
 169         $(top_srcdir)/config/amanda/userid.m4 \
 170         $(top_srcdir)/config/amanda/version.m4 \
 171         $(top_srcdir)/config/gnulib/alloca.m4 \
 172         $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
 173         $(top_srcdir)/config/gnulib/base64.m4 \
 174         $(top_srcdir)/config/gnulib/eoverflow.m4 \
 175         $(top_srcdir)/config/gnulib/extensions.m4 \
 176         $(top_srcdir)/config/gnulib/float_h.m4 \
 177         $(top_srcdir)/config/gnulib/fsusage.m4 \
 178         $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
 179         $(top_srcdir)/config/gnulib/getopt.m4 \
 180         $(top_srcdir)/config/gnulib/gettimeofday.m4 \
 181         $(top_srcdir)/config/gnulib/gnulib-common.m4 \
 182         $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
 183         $(top_srcdir)/config/gnulib/include_next.m4 \
 184         $(top_srcdir)/config/gnulib/inet_ntop.m4 \
 185         $(top_srcdir)/config/gnulib/intmax_t.m4 \
 186         $(top_srcdir)/config/gnulib/lock.m4 \
 187         $(top_srcdir)/config/gnulib/longlong.m4 \
 188         $(top_srcdir)/config/gnulib/malloc.m4 \
 189         $(top_srcdir)/config/gnulib/mkdtemp.m4 \
 190         $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
 191         $(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
 192         $(top_srcdir)/config/gnulib/physmem.m4 \
 193         $(top_srcdir)/config/gnulib/safe-read.m4 \
 194         $(top_srcdir)/config/gnulib/safe-write.m4 \
 195         $(top_srcdir)/config/gnulib/snprintf.m4 \
 196         $(top_srcdir)/config/gnulib/socklen.m4 \
 197         $(top_srcdir)/config/gnulib/sockpfaf.m4 \
 198         $(top_srcdir)/config/gnulib/ssize_t.m4 \
 199         $(top_srcdir)/config/gnulib/stdbool.m4 \
 200         $(top_srcdir)/config/gnulib/stdint.m4 \
 201         $(top_srcdir)/config/gnulib/stdio_h.m4 \
 202         $(top_srcdir)/config/gnulib/stdlib_h.m4 \
 203         $(top_srcdir)/config/gnulib/strdup.m4 \
 204         $(top_srcdir)/config/gnulib/string_h.m4 \
 205         $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
 206         $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
 207         $(top_srcdir)/config/gnulib/sys_time_h.m4 \
 208         $(top_srcdir)/config/gnulib/tempname.m4 \
 209         $(top_srcdir)/config/gnulib/unistd_h.m4 \
 210         $(top_srcdir)/config/gnulib/vasnprintf.m4 \
 211         $(top_srcdir)/config/gnulib/visibility.m4 \
 212         $(top_srcdir)/config/gnulib/wchar.m4 \
 213         $(top_srcdir)/config/gettext-macros/gettext.m4 \
 214         $(top_srcdir)/config/gettext-macros/iconv.m4 \
 215         $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
 216         $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
 217         $(top_srcdir)/config/gettext-macros/lib-link.m4 \
 218         $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
 219         $(top_srcdir)/config/gettext-macros/nls.m4 \
 220         $(top_srcdir)/config/gettext-macros/po.m4 \
 221         $(top_srcdir)/config/gettext-macros/progtest.m4 \
 222         $(top_srcdir)/config/gettext-macros/size_max.m4 \
 223         $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
 224         $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
 225         $(top_srcdir)/config/gettext-macros/wint_t.m4 \
 226         $(top_srcdir)/config/gettext-macros/xsize.m4 \
 227         $(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
 228 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 229         $(ACLOCAL_M4)
 230 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 231  configure.lineno config.status.lineno
 232 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
 233 CONFIG_HEADER = $(top_builddir)/config/config.h
 234 CONFIG_CLEAN_FILES = example/template.d/advanced.conf \
 235         example/template.d/amanda-S3.conf \
 236         example/template.d/amanda-harddisk.conf \
 237         example/template.d/amanda-single-tape.conf \
 238         example/template.d/amanda-tape-changer.conf
 239 CONFIG_CLEAN_VPATH_FILES =
 240 SOURCES =
 241 DIST_SOURCES =
 242 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 243         html-recursive info-recursive install-data-recursive \
 244         install-dvi-recursive install-exec-recursive \
 245         install-html-recursive install-info-recursive \
 246         install-pdf-recursive install-ps-recursive install-recursive \
 247         installcheck-recursive installdirs-recursive pdf-recursive \
 248         ps-recursive uninstall-recursive
 249 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 250 am__vpath_adj = case $$p in \
 251     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 252     *) f=$$p;; \
 253   esac;
 254 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 255 am__install_max = 40
 256 am__nobase_strip_setup = \
 257   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 258 am__nobase_strip = \
 259   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 260 am__nobase_list = $(am__nobase_strip_setup); \
 261   for p in $$list; do echo "$$p $$p"; done | \
 262   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 263   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 264     if (++n[$$2] == $(am__install_max)) \
 265       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 266     END { for (dir in files) print dir, files[dir] }'
 267 am__base_list = \
 268   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 269   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 270 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
 271 DATA = $(pkgdata_DATA)
 272 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 273   distclean-recursive maintainer-clean-recursive
 274 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 275         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
 276         distdir dist dist-all distcheck
 277 ETAGS = etags
 278 CTAGS = ctags
 279 DIST_SUBDIRS = . gnulib config common-src amar-src amandad-src \
 280         client-src application-src device-src server-src changer-src \
 281         xfer-src restore-src recover-src oldrecover-src amplot perl po \
 282         man example packaging installcheck
 283 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 284 distdir = $(PACKAGE)-$(VERSION)
 285 top_distdir = $(distdir)
 286 am__remove_distdir = \
 287   { test ! -d "$(distdir)" \
 288     || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 289          && rm -fr "$(distdir)"; }; }
 290 am__relativize = \
 291   dir0=`pwd`; \
 292   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 293   sed_rest='s,^[^/]*/*,,'; \
 294   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 295   sed_butlast='s,/*[^/]*$$,,'; \
 296   while test -n "$$dir1"; do \
 297     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 298     if test "$$first" != "."; then \
 299       if test "$$first" = ".."; then \
 300         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 301         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 302       else \
 303         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 304         if test "$$first2" = "$$first"; then \
 305           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 306         else \
 307           dir2="../$$dir2"; \
 308         fi; \
 309         dir0="$$dir0"/"$$first"; \
 310       fi; \
 311     fi; \
 312     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 313   done; \
 314   reldir="$$dir2"
 315 DIST_ARCHIVES = $(distdir).tar.gz
 316 GZIP_ENV = --best
 317 distuninstallcheck_listfiles = find . -type f -print
 318 distcleancheck_listfiles = find . -type f -print
 319 ACLOCAL = @ACLOCAL@
 320 AIX_BACKUP = @AIX_BACKUP@
 321 ALLOCA = @ALLOCA@
 322 ALLOCA_H = @ALLOCA_H@
 323 AMANDA_DBGDIR = @AMANDA_DBGDIR@
 324 AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
 325 AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
 326 AMANDA_TMPDIR = @AMANDA_TMPDIR@
 327 AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
 328 AMLINT = @AMLINT@
 329 AMLINTFLAGS = @AMLINTFLAGS@
 330 AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
 331 AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
 332 AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
 333 AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
 334 AMTAR = @AMTAR@
 335 APPLICATION_DIR = @APPLICATION_DIR@
 336 AR = @AR@
 337 ARPA_INET_H = @ARPA_INET_H@
 338 ASSERTIONS = @ASSERTIONS@
 339 AUTOCONF = @AUTOCONF@
 340 AUTOHEADER = @AUTOHEADER@
 341 AUTOMAKE = @AUTOMAKE@
 342 AWK = @AWK@
 343 BASH = @BASH@
 344 BINARY_OWNER = @BINARY_OWNER@
 345 BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
 346 BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
 347 BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
 348 BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
 349 BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
 350 BSDTCP_SECURITY = @BSDTCP_SECURITY@
 351 BSDUDP_SECURITY = @BSDUDP_SECURITY@
 352 BSD_SECURITY = @BSD_SECURITY@
 353 CAT = @CAT@
 354 CC = @CC@
 355 CCDEPMODE = @CCDEPMODE@
 356 CFLAGS = @CFLAGS@
 357 CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
 358 CHECK_USERID = @CHECK_USERID@
 359 CHIO = @CHIO@
 360 CHS = @CHS@
 361 CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
 362 CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
 363 CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
 364 CLIENT_LOGIN = @CLIENT_LOGIN@
 365 CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
 366 COMPRESS = @COMPRESS@
 367 COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
 368 COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
 369 COMPRESS_PATH = @COMPRESS_PATH@
 370 COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
 371 CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
 372 CONFIG_DIR = @CONFIG_DIR@
 373 CPP = @CPP@
 374 CPPFLAGS = @CPPFLAGS@
 375 CURL_CONFIG = @CURL_CONFIG@
 376 CXX = @CXX@
 377 CXXCPP = @CXXCPP@
 378 CXXDEPMODE = @CXXDEPMODE@
 379 CXXFLAGS = @CXXFLAGS@
 380 CYGPATH_W = @CYGPATH_W@
 381 DD = @DD@
 382 DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
 383 DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
 384 DEFAULT_CONFIG = @DEFAULT_CONFIG@
 385 DEFAULT_MAILER = @DEFAULT_MAILER@
 386 DEFAULT_SERVER = @DEFAULT_SERVER@
 387 DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
 388 DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
 389 DEFS = @DEFS@
 390 DEPDIR = @DEPDIR@
 391 DOC_BUILD_DATE = @DOC_BUILD_DATE@
 392 DUMP = @DUMP@
 393 DUMP_RETURNS_1 = @DUMP_RETURNS_1@
 394 ECHO = @ECHO@
 395 ECHO_C = @ECHO_C@
 396 ECHO_N = @ECHO_N@
 397 ECHO_T = @ECHO_T@
 398 EGREP = @EGREP@
 399 EOVERFLOW = @EOVERFLOW@
 400 EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
 401 EXEEXT = @EXEEXT@
 402 F77 = @F77@
 403 FFLAGS = @FFLAGS@
 404 FLOAT_H = @FLOAT_H@
 405 GETCONF = @GETCONF@
 406 GETOPT_H = @GETOPT_H@
 407 GETTEXT = @GETTEXT@
 408 GLIB_CFLAGS = @GLIB_CFLAGS@
 409 GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
 410 GLIB_LIBS = @GLIB_LIBS@
 411 GLIB_MKENUMS = @GLIB_MKENUMS@
 412 GMSGFMT = @GMSGFMT@
 413 GMSGFMT_015 = @GMSGFMT_015@
 414 GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
 415 GNULIB_CHOWN = @GNULIB_CHOWN@
 416 GNULIB_DUP2 = @GNULIB_DUP2@
 417 GNULIB_ENVIRON = @GNULIB_ENVIRON@
 418 GNULIB_FCHDIR = @GNULIB_FCHDIR@
 419 GNULIB_FFLUSH = @GNULIB_FFLUSH@
 420 GNULIB_FOPEN = @GNULIB_FOPEN@
 421 GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
 422 GNULIB_FREOPEN = @GNULIB_FREOPEN@
 423 GNULIB_FSEEK = @GNULIB_FSEEK@
 424 GNULIB_FSEEKO = @GNULIB_FSEEKO@
 425 GNULIB_FTELL = @GNULIB_FTELL@
 426 GNULIB_FTELLO = @GNULIB_FTELLO@
 427 GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
 428 GNULIB_GETCWD = @GNULIB_GETCWD@
 429 GNULIB_GETDELIM = @GNULIB_GETDELIM@
 430 GNULIB_GETLINE = @GNULIB_GETLINE@
 431 GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
 432 GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
 433 GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
 434 GNULIB_LCHOWN = @GNULIB_LCHOWN@
 435 GNULIB_LSEEK = @GNULIB_LSEEK@
 436 GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
 437 GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
 438 GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
 439 GNULIB_MBSCHR = @GNULIB_MBSCHR@
 440 GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
 441 GNULIB_MBSLEN = @GNULIB_MBSLEN@
 442 GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
 443 GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
 444 GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
 445 GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
 446 GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
 447 GNULIB_MBSSEP = @GNULIB_MBSSEP@
 448 GNULIB_MBSSPN = @GNULIB_MBSSPN@
 449 GNULIB_MBSSTR = @GNULIB_MBSSTR@
 450 GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
 451 GNULIB_MEMMEM = @GNULIB_MEMMEM@
 452 GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
 453 GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
 454 GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
 455 GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
 456 GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
 457 GNULIB_PUTENV = @GNULIB_PUTENV@
 458 GNULIB_READLINK = @GNULIB_READLINK@
 459 GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
 460 GNULIB_SETENV = @GNULIB_SETENV@
 461 GNULIB_SLEEP = @GNULIB_SLEEP@
 462 GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
 463 GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
 464 GNULIB_STPCPY = @GNULIB_STPCPY@
 465 GNULIB_STPNCPY = @GNULIB_STPNCPY@
 466 GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
 467 GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
 468 GNULIB_STRDUP = @GNULIB_STRDUP@
 469 GNULIB_STRERROR = @GNULIB_STRERROR@
 470 GNULIB_STRNDUP = @GNULIB_STRNDUP@
 471 GNULIB_STRNLEN = @GNULIB_STRNLEN@
 472 GNULIB_STRPBRK = @GNULIB_STRPBRK@
 473 GNULIB_STRSEP = @GNULIB_STRSEP@
 474 GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
 475 GNULIB_STRSTR = @GNULIB_STRSTR@
 476 GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
 477 GNULIB_UNSETENV = @GNULIB_UNSETENV@
 478 GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
 479 GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
 480 GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
 481 GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
 482 GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
 483 GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
 484 GNUPLOT = @GNUPLOT@
 485 GNUTAR = @GNUTAR@
 486 GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
 487 GOBJECT_QUERY = @GOBJECT_QUERY@
 488 GREP = @GREP@
 489 GZIP = @GZIP@
 490 HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
 491 HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
 492 HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
 493 HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
 494 HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
 495 HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
 496 HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
 497 HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
 498 HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
 499 HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
 500 HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
 501 HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
 502 HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
 503 HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
 504 HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
 505 HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
 506 HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
 507 HAVE_DUP2 = @HAVE_DUP2@
 508 HAVE_FSEEKO = @HAVE_FSEEKO@
 509 HAVE_FTELLO = @HAVE_FTELLO@
 510 HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
 511 HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
 512 HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
 513 HAVE_GZIP = @HAVE_GZIP@
 514 HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
 515 HAVE_IO_H = @HAVE_IO_H@
 516 HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
 517 HAVE_LSTAT = @HAVE_LSTAT@
 518 HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
 519 HAVE_MEMPCPY = @HAVE_MEMPCPY@
 520 HAVE_MKDTEMP = @HAVE_MKDTEMP@
 521 HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
 522 HAVE_OS_H = @HAVE_OS_H@
 523 HAVE_READLINK = @HAVE_READLINK@
 524 HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
 525 HAVE_SETENV = @HAVE_SETENV@
 526 HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
 527 HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
 528 HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
 529 HAVE_SLEEP = @HAVE_SLEEP@
 530 HAVE_STDINT_H = @HAVE_STDINT_H@
 531 HAVE_STPCPY = @HAVE_STPCPY@
 532 HAVE_STPNCPY = @HAVE_STPNCPY@
 533 HAVE_STRCASESTR = @HAVE_STRCASESTR@
 534 HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
 535 HAVE_STRNDUP = @HAVE_STRNDUP@
 536 HAVE_STRPBRK = @HAVE_STRPBRK@
 537 HAVE_STRSEP = @HAVE_STRSEP@
 538 HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
 539 HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
 540 HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
 541 HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
 542 HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
 543 HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
 544 HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
 545 HAVE_UNISTD_H = @HAVE_UNISTD_H@
 546 HAVE_UNSETENV = @HAVE_UNSETENV@
 547 HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
 548 HAVE_VASPRINTF = @HAVE_VASPRINTF@
 549 HAVE_VISIBILITY = @HAVE_VISIBILITY@
 550 HAVE_WCHAR_H = @HAVE_WCHAR_H@
 551 HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
 552 HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
 553 HAVE__BOOL = @HAVE__BOOL@
 554 INCLUDE_NEXT = @INCLUDE_NEXT@
 555 INSTALL = @INSTALL@
 556 INSTALL_DATA = @INSTALL_DATA@
 557 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 558 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 559 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 560 INTLLIBS = @INTLLIBS@
 561 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 562 KRB4_SECURITY = @KRB4_SECURITY@
 563 KRB5_SECURITY = @KRB5_SECURITY@
 564 LDFLAGS = @LDFLAGS@
 565 LEX = @LEX@
 566 LEXLIB = @LEXLIB@
 567 LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
 568 LIBCURL = @LIBCURL@
 569 LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
 570 LIBICONV = @LIBICONV@
 571 LIBINTL = @LIBINTL@
 572 LIBMULTITHREAD = @LIBMULTITHREAD@
 573 LIBOBJS = @LIBOBJS@
 574 LIBPTH = @LIBPTH@
 575 LIBS = @LIBS@
 576 LIBTHREAD = @LIBTHREAD@
 577 LIBTOOL = @LIBTOOL@
 578 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 579 LN_S = @LN_S@
 580 LOCKING = @LOCKING@
 581 LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
 582 LTLIBICONV = @LTLIBICONV@
 583 LTLIBINTL = @LTLIBINTL@
 584 LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
 585 LTLIBOBJS = @LTLIBOBJS@
 586 LTLIBPTH = @LTLIBPTH@
 587 LTLIBTHREAD = @LTLIBTHREAD@
 588 MAILER = @MAILER@
 589 MAKEINFO = @MAKEINFO@
 590 MCUTIL = @MCUTIL@
 591 MKDIR_P = @MKDIR_P@
 592 MSGFMT = @MSGFMT@
 593 MSGFMT_015 = @MSGFMT_015@
 594 MSGMERGE = @MSGMERGE@
 595 MT = @MT@
 596 MTX = @MTX@
 597 MT_FILE_FLAG = @MT_FILE_FLAG@
 598 NETINET_IN_H = @NETINET_IN_H@
 599 NEXT_FLOAT_H = @NEXT_FLOAT_H@
 600 NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
 601 NEXT_STDINT_H = @NEXT_STDINT_H@
 602 NEXT_STDIO_H = @NEXT_STDIO_H@
 603 NEXT_STDLIB_H = @NEXT_STDLIB_H@
 604 NEXT_STRING_H = @NEXT_STRING_H@
 605 NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
 606 NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
 607 NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
 608 NEXT_UNISTD_H = @NEXT_UNISTD_H@
 609 NEXT_WCHAR_H = @NEXT_WCHAR_H@
 610 OBJEXT = @OBJEXT@
 611 PACKAGE = @PACKAGE@
 612 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 613 PACKAGE_NAME = @PACKAGE_NAME@
 614 PACKAGE_STRING = @PACKAGE_STRING@
 615 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 616 PACKAGE_VERSION = @PACKAGE_VERSION@
 617 PATH_SEPARATOR = @PATH_SEPARATOR@
 618 PCAT = @PCAT@
 619 PERL = @PERL@
 620 PERLEXTLIBS = @PERLEXTLIBS@
 621 PERL_INC = @PERL_INC@
 622 PKG_CONFIG = @PKG_CONFIG@
 623 POSUB = @POSUB@
 624 PRINT = @PRINT@
 625 PS = @PS@
 626 PS_ARGUMENT = @PS_ARGUMENT@
 627 PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
 628 RANLIB = @RANLIB@
 629 READLINE_LIBS = @READLINE_LIBS@
 630 REPLACE_CHOWN = @REPLACE_CHOWN@
 631 REPLACE_FCHDIR = @REPLACE_FCHDIR@
 632 REPLACE_FFLUSH = @REPLACE_FFLUSH@
 633 REPLACE_FOPEN = @REPLACE_FOPEN@
 634 REPLACE_FPRINTF = @REPLACE_FPRINTF@
 635 REPLACE_FREOPEN = @REPLACE_FREOPEN@
 636 REPLACE_FSEEK = @REPLACE_FSEEK@
 637 REPLACE_FSEEKO = @REPLACE_FSEEKO@
 638 REPLACE_FTELL = @REPLACE_FTELL@
 639 REPLACE_FTELLO = @REPLACE_FTELLO@
 640 REPLACE_GETCWD = @REPLACE_GETCWD@
 641 REPLACE_GETLINE = @REPLACE_GETLINE@
 642 REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
 643 REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
 644 REPLACE_LCHOWN = @REPLACE_LCHOWN@
 645 REPLACE_LSEEK = @REPLACE_LSEEK@
 646 REPLACE_MEMMEM = @REPLACE_MEMMEM@
 647 REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
 648 REPLACE_PRINTF = @REPLACE_PRINTF@
 649 REPLACE_PUTENV = @REPLACE_PUTENV@
 650 REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
 651 REPLACE_SPRINTF = @REPLACE_SPRINTF@
 652 REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
 653 REPLACE_STRERROR = @REPLACE_STRERROR@
 654 REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
 655 REPLACE_STRSTR = @REPLACE_STRSTR@
 656 REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
 657 REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
 658 REPLACE_VPRINTF = @REPLACE_VPRINTF@
 659 REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
 660 REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
 661 REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
 662 RESTORE = @RESTORE@
 663 RSH_SECURITY = @RSH_SECURITY@
 664 SAMBA_CLIENT = @SAMBA_CLIENT@
 665 SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
 666 SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
 667 SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
 668 SERVICE_SUFFIX = @SERVICE_SUFFIX@
 669 SETUID_GROUP = @SETUID_GROUP@
 670 SET_MAKE = @SET_MAKE@
 671 SHELL = @SHELL@
 672 SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
 673 SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
 674 SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
 675 SORT = @SORT@
 676 SSH = @SSH@
 677 SSH_SECURITY = @SSH_SECURITY@
 678 STDBOOL_H = @STDBOOL_H@
 679 STDINT_H = @STDINT_H@
 680 STRIP = @STRIP@
 681 SVN = @SVN@
 682 SWIG = @SWIG@
 683 SWIG_LIB = @SWIG_LIB@
 684 SYS_SOCKET_H = @SYS_SOCKET_H@
 685 SYS_STAT_H = @SYS_STAT_H@
 686 SYS_TIME_H = @SYS_TIME_H@
 687 TCPPORTRANGE = @TCPPORTRANGE@
 688 TICKET_LIFETIME = @TICKET_LIFETIME@
 689 UDPPORTRANGE = @UDPPORTRANGE@
 690 UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
 691 UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
 692 USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
 693 USE_NLS = @USE_NLS@
 694 USE_RUNDUMP = @USE_RUNDUMP@
 695 USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
 696 VDUMP = @VDUMP@
 697 VERSION = @VERSION@
 698 VERSION_COMMENT = @VERSION_COMMENT@
 699 VERSION_MAJOR = @VERSION_MAJOR@
 700 VERSION_MINOR = @VERSION_MINOR@
 701 VERSION_PATCH = @VERSION_PATCH@
 702 VERSION_SUFFIX = @VERSION_SUFFIX@
 703 VOID_UNSETENV = @VOID_UNSETENV@
 704 VRESTORE = @VRESTORE@
 705 VXDUMP = @VXDUMP@
 706 VXRESTORE = @VXRESTORE@
 707 WCHAR_H = @WCHAR_H@
 708 WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
 709 WINT_T_SUFFIX = @WINT_T_SUFFIX@
 710 XFSDUMP = @XFSDUMP@
 711 XFSRESTORE = @XFSRESTORE@
 712 XGETTEXT = @XGETTEXT@
 713 XGETTEXT_015 = @XGETTEXT_015@
 714 XSLREL = @XSLREL@
 715 XSLTPROC = @XSLTPROC@
 716 XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
 717 YACC = @YACC@
 718 YFLAGS = @YFLAGS@
 719 _libcurl_config = @_libcurl_config@
 720 abs_builddir = @abs_builddir@
 721 abs_srcdir = @abs_srcdir@
 722 abs_top_builddir = @abs_top_builddir@
 723 abs_top_srcdir = @abs_top_srcdir@
 724 ac_ct_CC = @ac_ct_CC@
 725 ac_ct_CXX = @ac_ct_CXX@
 726 ac_ct_F77 = @ac_ct_F77@
 727 am__include = @am__include@
 728 am__leading_dot = @am__leading_dot@
 729 am__quote = @am__quote@
 730 am__tar = @am__tar@
 731 am__untar = @am__untar@
 732 amdatadir = @amdatadir@
 733 amincludedir = @amincludedir@
 734 amlibdir = @amlibdir@
 735 amlibexecdir = @amlibexecdir@
 736 amperldir = @amperldir@
 737 bindir = @bindir@
 738 build = @build@
 739 build_alias = @build_alias@
 740 build_cpu = @build_cpu@
 741 build_os = @build_os@
 742 build_vendor = @build_vendor@
 743 builddir = @builddir@
 744 datadir = @datadir@
 745 datarootdir = @datarootdir@
 746 docdir = @docdir@
 747 dvidir = @dvidir@
 748 exec_prefix = @exec_prefix@
 749 gl_LIBOBJS = @gl_LIBOBJS@
 750 gl_LTLIBOBJS = @gl_LTLIBOBJS@
 751 gltests_LIBOBJS = @gltests_LIBOBJS@
 752 gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
 753 host = @host@
 754 host_alias = @host_alias@
 755 host_cpu = @host_cpu@
 756 host_os = @host_os@
 757 host_vendor = @host_vendor@
 758 htmldir = @htmldir@
 759 includedir = @includedir@
 760 infodir = @infodir@
 761 install_sh = @install_sh@
 762 libdir = @libdir@
 763 libexecdir = @libexecdir@
 764 localedir = @localedir@
 765 localstatedir = @localstatedir@
 766 mandir = @mandir@
 767 mkdir_p = @mkdir_p@
 768 oldincludedir = @oldincludedir@
 769 pdfdir = @pdfdir@
 770 prefix = @prefix@
 771 program_transform_name = @program_transform_name@
 772 psdir = @psdir@
 773 sbindir = @sbindir@
 774 sharedstatedir = @sharedstatedir@
 775 srcdir = @srcdir@
 776 sysconfdir = @sysconfdir@
 777 target = @target@
 778 target_alias = @target_alias@
 779 target_cpu = @target_cpu@
 780 target_os = @target_os@
 781 target_vendor = @target_vendor@
 782 top_build_prefix = @top_build_prefix@
 783 top_builddir = @top_builddir@
 784 top_srcdir = @top_srcdir@
 785 AUTOMAKE_OPTIONS = 1.4 foreign
 786 SUFFIXES =
 787 EXTRA_DIST = $(SNAPSHOT_STAMP) $(pkgdata_DATA) autogen contrib/README \
 788         contrib/dbbackup.README contrib/dbbackup.ksh \
 789         contrib/dbbackup.sql contrib/dbbackup.tcl contrib/mkamandisk \
 790         contrib/set_prod_link.pl contrib/gsc/README \
 791         contrib/gsc/cfggsc.c contrib/gsc/defgsc.c contrib/gsc/gsc.add \
 792         contrib/gsc/gscdd.c contrib/gsc/gscdds.h contrib/gsc/makefile \
 793         contrib/gsc/tstinq.c contrib/gsc/ucfggsc.c \
 794         patches/regex-3.6alpha.patch patches/samba-largefs.patch \
 795         patches/tar-1.12.patch UPGRADING DEVELOPING
 796 BUILT_SOURCES =
 797 MOSTLYCLEANFILES =
 798 CLEANFILES =
 799 DISTCLEANFILES = $(am__append_1)
 800 MAINTAINERCLEANFILES =
 801
 802 # sed expression to strip leading directories from a filename; this converts e.g.,
 803 # src/foo/bar.so to bar.so.
 804 strip_leading_dirs = s|^.*/||
 805 @WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 806 @WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
 807
 808
 809 # define a snippet of the scripts below to either perform a chown/chmod operation,
 810 # or record that operation in the logfile.  On entry to the snippet, $$dest is the
 811 # destination directory, $$cmd is the srcdir-relative pathname of the target file,
 812 # $$chown is the ownership, and $$chmod is the permission pattern.
 813 @WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
 814 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
 815 @WANT_INSTALLPERMS_TRUE@        echo chown "$$chown" "$$pa"; \
 816 @WANT_INSTALLPERMS_TRUE@        chown "$$chown" "$$pa" || exit 1; \
 817 @WANT_INSTALLPERMS_TRUE@    fi; \
 818 @WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
 819 @WANT_INSTALLPERMS_TRUE@        echo chmod "$$chmod" "$$pa"; \
 820 @WANT_INSTALLPERMS_TRUE@        chmod "$$chmod" "$$pa" || exit 1; \
 821 @WANT_INSTALLPERMS_TRUE@    fi
 822
 823 @WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
 824 ACLOCAL_AMFLAGS = --force -I . -I config -I config/gettext-macros -I config/gnulib -I config/amanda -I config/macro-archive
 825 @WANT_CLIENT_TRUE@CLIENT_SUBDIRS = client-src application-src
 826 @WANT_SERVER_TRUE@SERVER_SUBDIRS = device-src server-src changer-src xfer-src
 827 @WANT_RESTORE_TRUE@RESTORE_SUBDIRS = restore-src
 828 @WANT_RECOVER_TRUE@RECOVER_SUBDIRS = recover-src oldrecover-src
 829 @WANT_AMPLOT_TRUE@PLOT_SUBDIRS = amplot
 830 # order is significant, don't change it arbitrarily
 831 SUBDIRS = . \
 832         gnulib \
 833         config \
 834         common-src \
 835         amar-src \
 836         amandad-src \
 837         $(TAPE_SUBDIRS) \
 838         $(CLIENT_SUBDIRS) \
 839         $(SERVER_SUBDIRS) \
 840         $(RESTORE_SUBDIRS) \
 841         $(RECOVER_SUBDIRS) \
 842         $(PLOT_SUBDIRS) \
 843         perl \
 844         po \
 845         man \
 846         example \
 847         packaging \
 848         installcheck
 849
 850 pkgdata_DATA = \
 851         ReleaseNotes    \
 852         COPYRIGHT       \
 853         NEWS            \
 854         ChangeLog
 855
 856 CONFIG_STATUS = config.status
 857
 858 # ensure that configure gets the right arguments for distcheck; this keeps the
 859 # user/group through to the distcheck, rather than defaulting back to 'amanda'.
 860 DISTCHECK_CONFIGURE_FLAGS = --with-user=$(CLIENT_LOGIN) --with-group=$(SETUID_GROUP) --with-owner=$(BINARY_OWNER) --disable-installperms --without-amperldir --without-force-uid --with-tmpdir=$(AMANDA_TMPDIR) SINGLE_USERID=yes CLOBBER_MY_CONFIG=OK
 861 all: $(BUILT_SOURCES)
 862         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 863
 864 .SUFFIXES:
 865 .SUFFIXES:
 866 am--refresh:
 867         @:
 868 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
 869         @for dep in $?; do \
 870           case '$(am__configure_deps)' in \
 871             *$$dep*) \
 872               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 873               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 874                 && exit 0; \
 875               exit 1;; \
 876           esac; \
 877         done; \
 878         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 879         $(am__cd) $(top_srcdir) && \
 880           $(AUTOMAKE) --foreign Makefile
 881 .PRECIOUS: Makefile
 882 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 883         @case '$?' in \
 884           *config.status*) \
 885             echo ' $(SHELL) ./config.status'; \
 886             $(SHELL) ./config.status;; \
 887           *) \
 888             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 889             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 890         esac;
 891
 892 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 893         $(SHELL) ./config.status --recheck
 894
 895 $(top_srcdir)/configure:  $(am__configure_deps)
 896         $(am__cd) $(srcdir) && $(AUTOCONF)
 897 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 898         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 899 $(am__aclocal_m4_deps):
 900 example/template.d/advanced.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/advanced.conf.in
 901         cd $(top_builddir) && $(SHELL) ./config.status $@
 902 example/template.d/amanda-S3.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-S3.conf.in
 903         cd $(top_builddir) && $(SHELL) ./config.status $@
 904 example/template.d/amanda-harddisk.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-harddisk.conf.in
 905         cd $(top_builddir) && $(SHELL) ./config.status $@
 906 example/template.d/amanda-single-tape.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-single-tape.conf.in
 907         cd $(top_builddir) && $(SHELL) ./config.status $@
 908 example/template.d/amanda-tape-changer.conf: $(top_builddir)/config.status $(top_srcdir)/example/template.d/amanda-tape-changer.conf.in
 909         cd $(top_builddir) && $(SHELL) ./config.status $@
 910
 911 mostlyclean-libtool:
 912         -rm -f *.lo
 913
 914 clean-libtool:
 915         -rm -rf .libs _libs
 916
 917 distclean-libtool:
 918         -rm -f libtool config.lt
 919 install-pkgdataDATA: $(pkgdata_DATA)
 920         @$(NORMAL_INSTALL)
 921         test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
 922         @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
 923         for p in $$list; do \
 924           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 925           echo "$$d$$p"; \
 926         done | $(am__base_list) | \
 927         while read files; do \
 928           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
 929           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
 930         done
 931
 932 uninstall-pkgdataDATA:
 933         @$(NORMAL_UNINSTALL)
 934         @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
 935         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 936         test -n "$$files" || exit 0; \
 937         echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
 938         cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
 939
 940 # This directory's subdirectories are mostly independent; you can cd
 941 # into them and run `make' without going through this Makefile.
 942 # To change the values of `make' variables: instead of editing Makefiles,
 943 # (1) if the variable is set in `config.status', edit `config.status'
 944 #     (which will cause the Makefiles to be regenerated when you run `make');
 945 # (2) otherwise, pass the desired values on the `make' command line.
 946 $(RECURSIVE_TARGETS):
 947         @failcom='exit 1'; \
 948         for f in x $$MAKEFLAGS; do \
 949           case $$f in \
 950             *=* | --[!k]*);; \
 951             *k*) failcom='fail=yes';; \
 952           esac; \
 953         done; \
 954         dot_seen=no; \
 955         target=`echo $@ | sed s/-recursive//`; \
 956         list='$(SUBDIRS)'; for subdir in $$list; do \
 957           echo "Making $$target in $$subdir"; \
 958           if test "$$subdir" = "."; then \
 959             dot_seen=yes; \
 960             local_target="$$target-am"; \
 961           else \
 962             local_target="$$target"; \
 963           fi; \
 964           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 965           || eval $$failcom; \
 966         done; \
 967         if test "$$dot_seen" = "no"; then \
 968           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 969         fi; test -z "$$fail"
 970
 971 $(RECURSIVE_CLEAN_TARGETS):
 972         @failcom='exit 1'; \
 973         for f in x $$MAKEFLAGS; do \
 974           case $$f in \
 975             *=* | --[!k]*);; \
 976             *k*) failcom='fail=yes';; \
 977           esac; \
 978         done; \
 979         dot_seen=no; \
 980         case "$@" in \
 981           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 982           *) list='$(SUBDIRS)' ;; \
 983         esac; \
 984         rev=''; for subdir in $$list; do \
 985           if test "$$subdir" = "."; then :; else \
 986             rev="$$subdir $$rev"; \
 987           fi; \
 988         done; \
 989         rev="$$rev ."; \
 990         target=`echo $@ | sed s/-recursive//`; \
 991         for subdir in $$rev; do \
 992           echo "Making $$target in $$subdir"; \
 993           if test "$$subdir" = "."; then \
 994             local_target="$$target-am"; \
 995           else \
 996             local_target="$$target"; \
 997           fi; \
 998           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 999           || eval $$failcom; \
1000         done && test -z "$$fail"
1001 tags-recursive:
1002         list='$(SUBDIRS)'; for subdir in $$list; do \
1003           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
1004         done
1005 ctags-recursive:
1006         list='$(SUBDIRS)'; for subdir in $$list; do \
1007           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
1008         done
1009
1010 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
1011         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
1012         unique=`for i in $$list; do \
1013             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1014           done | \
1015           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1016               END { if (nonempty) { for (i in files) print i; }; }'`; \
1017         mkid -fID $$unique
1018 tags: TAGS
1019
1020 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1021                 $(TAGS_FILES) $(LISP)
1022         set x; \
1023         here=`pwd`; \
1024         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
1025           include_option=--etags-include; \
1026           empty_fix=.; \
1027         else \
1028           include_option=--include; \
1029           empty_fix=; \
1030         fi; \
1031         list='$(SUBDIRS)'; for subdir in $$list; do \
1032           if test "$$subdir" = .; then :; else \
1033             test ! -f $$subdir/TAGS || \
1034               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
1035           fi; \
1036         done; \
1037         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1038         unique=`for i in $$list; do \
1039             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1040           done | \
1041           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1042               END { if (nonempty) { for (i in files) print i; }; }'`; \
1043         shift; \
1044         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
1045           test -n "$$unique" || unique=$$empty_fix; \
1046           if test $$# -gt 0; then \
1047             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1048               "$$@" $$unique; \
1049           else \
1050             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
1051               $$unique; \
1052           fi; \
1053         fi
1054 ctags: CTAGS
1055 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
1056                 $(TAGS_FILES) $(LISP)
1057         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
1058         unique=`for i in $$list; do \
1059             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
1060           done | \
1061           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
1062               END { if (nonempty) { for (i in files) print i; }; }'`; \
1063         test -z "$(CTAGS_ARGS)$$unique" \
1064           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
1065              $$unique
1066
1067 GTAGS:
1068         here=`$(am__cd) $(top_builddir) && pwd` \
1069           && $(am__cd) $(top_srcdir) \
1070           && gtags -i $(GTAGS_ARGS) "$$here"
1071
1072 distclean-tags:
1073         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
1074
1075 distdir: $(DISTFILES)
1076         $(am__remove_distdir)
1077         test -d "$(distdir)" || mkdir "$(distdir)"
1078         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1079         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
1080         list='$(DISTFILES)'; \
1081           dist_files=`for file in $$list; do echo $$file; done | \
1082           sed -e "s|^$$srcdirstrip/||;t" \
1083               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
1084         case $$dist_files in \
1085           */*) $(MKDIR_P) `echo "$$dist_files" | \
1086                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
1087                            sort -u` ;; \
1088         esac; \
1089         for file in $$dist_files; do \
1090           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1091           if test -d $$d/$$file; then \
1092             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1093             if test -d "$(distdir)/$$file"; then \
1094               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1095             fi; \
1096             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1097               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1098               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1099             fi; \
1100             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1101           else \
1102             test -f "$(distdir)/$$file" \
1103             || cp -p $$d/$$file "$(distdir)/$$file" \
1104             || exit 1; \
1105           fi; \
1106         done
1107         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1108           if test "$$subdir" = .; then :; else \
1109             test -d "$(distdir)/$$subdir" \
1110             || $(MKDIR_P) "$(distdir)/$$subdir" \
1111             || exit 1; \
1112           fi; \
1113         done
1114         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
1115           if test "$$subdir" = .; then :; else \
1116             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
1117             $(am__relativize); \
1118             new_distdir=$$reldir; \
1119             dir1=$$subdir; dir2="$(top_distdir)"; \
1120             $(am__relativize); \
1121             new_top_distdir=$$reldir; \
1122             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
1123             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
1124             ($(am__cd) $$subdir && \
1125               $(MAKE) $(AM_MAKEFLAGS) \
1126                 top_distdir="$$new_top_distdir" \
1127                 distdir="$$new_distdir" \
1128                 am__remove_distdir=: \
1129                 am__skip_length_check=: \
1130                 am__skip_mode_fix=: \
1131                 distdir) \
1132               || exit 1; \
1133           fi; \
1134         done
1135         $(MAKE) $(AM_MAKEFLAGS) \
1136           top_distdir="$(top_distdir)" distdir="$(distdir)" \
1137           dist-hook
1138         -test -n "$(am__skip_mode_fix)" \
1139         || find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
1140           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
1141           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
1142           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
1143         || chmod -R a+r "$(distdir)"
1144 dist-gzip: distdir
1145         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1146         $(am__remove_distdir)
1147
1148 dist-bzip2: distdir
1149         tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
1150         $(am__remove_distdir)
1151
1152 dist-lzma: distdir
1153         tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
1154         $(am__remove_distdir)
1155
1156 dist-xz: distdir
1157         tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
1158         $(am__remove_distdir)
1159
1160 dist-tarZ: distdir
1161         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
1162         $(am__remove_distdir)
1163
1164 dist-shar: distdir
1165         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
1166         $(am__remove_distdir)
1167
1168 dist-zip: distdir
1169         -rm -f $(distdir).zip
1170         zip -rq $(distdir).zip $(distdir)
1171         $(am__remove_distdir)
1172
1173 dist dist-all: distdir
1174         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
1175         $(am__remove_distdir)
1176
1177 # This target untars the dist file and tries a VPATH configuration.  Then
1178 # it guarantees that the distribution is self-contained by making another
1179 # tarfile.
1180 distcheck: dist
1181         case '$(DIST_ARCHIVES)' in \
1182         *.tar.gz*) \
1183           GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
1184         *.tar.bz2*) \
1185           bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
1186         *.tar.lzma*) \
1187           unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
1188         *.tar.xz*) \
1189           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
1190         *.tar.Z*) \
1191           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
1192         *.shar.gz*) \
1193           GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
1194         *.zip*) \
1195           unzip $(distdir).zip ;;\
1196         esac
1197         chmod -R a-w $(distdir); chmod a+w $(distdir)
1198         mkdir $(distdir)/_build
1199         mkdir $(distdir)/_inst
1200         chmod a-w $(distdir)
1201         test -d $(distdir)/_build || exit 0; \
1202         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
1203           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
1204           && am__cwd=`pwd` \
1205           && $(am__cd) $(distdir)/_build \
1206           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
1207             $(DISTCHECK_CONFIGURE_FLAGS) \
1208           && $(MAKE) $(AM_MAKEFLAGS) \
1209           && $(MAKE) $(AM_MAKEFLAGS) dvi \
1210           && $(MAKE) $(AM_MAKEFLAGS) check \
1211           && $(MAKE) $(AM_MAKEFLAGS) install \
1212           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
1213           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
1214           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
1215                 distuninstallcheck \
1216           && chmod -R a-w "$$dc_install_base" \
1217           && ({ \
1218                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
1219                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
1220                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
1221                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
1222                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
1223               } || { rm -rf "$$dc_destdir"; exit 1; }) \
1224           && rm -rf "$$dc_destdir" \
1225           && $(MAKE) $(AM_MAKEFLAGS) dist \
1226           && rm -rf $(DIST_ARCHIVES) \
1227           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
1228           && cd "$$am__cwd" \
1229           || exit 1
1230         $(am__remove_distdir)
1231         @(echo "$(distdir) archives ready for distribution: "; \
1232           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
1233           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
1234 distuninstallcheck:
1235         @$(am__cd) '$(distuninstallcheck_dir)' \
1236         && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
1237            || { echo "ERROR: files left after uninstall:" ; \
1238                 if test -n "$(DESTDIR)"; then \
1239                   echo "  (check DESTDIR support)"; \
1240                 fi ; \
1241                 $(distuninstallcheck_listfiles) ; \
1242                 exit 1; } >&2
1243 distcleancheck: distclean
1244         @if test '$(srcdir)' = . ; then \
1245           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
1246           exit 1 ; \
1247         fi
1248         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
1249           || { echo "ERROR: files left in build directory after distclean:" ; \
1250                $(distcleancheck_listfiles) ; \
1251                exit 1; } >&2
1252 check-am: all-am
1253 check: $(BUILT_SOURCES)
1254         $(MAKE) $(AM_MAKEFLAGS) check-recursive
1255 all-am: Makefile $(DATA)
1256 installdirs: installdirs-recursive
1257 installdirs-am:
1258         for dir in "$(DESTDIR)$(pkgdatadir)"; do \
1259           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1260         done
1261 install: $(BUILT_SOURCES)
1262         $(MAKE) $(AM_MAKEFLAGS) install-recursive
1263 install-exec: install-exec-recursive
1264 install-data: install-data-recursive
1265 uninstall: uninstall-recursive
1266
1267 install-am: all-am
1268         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1269
1270 installcheck: installcheck-recursive
1271 install-strip:
1272         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1273           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1274           `test -z '$(STRIP)' || \
1275             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
1276 mostlyclean-generic:
1277         -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
1278
1279 clean-generic:
1280         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1281
1282 distclean-generic:
1283         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1284         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1285         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1286
1287 maintainer-clean-generic:
1288         @echo "This command is intended for maintainers to use"
1289         @echo "it deletes files that may require special tools to rebuild."
1290         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1291         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
1292 clean: clean-recursive
1293
1294 clean-am: clean-generic clean-libtool mostlyclean-am
1295
1296 distclean: distclean-recursive
1297         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1298         -rm -f Makefile
1299 distclean-am: clean-am distclean-generic distclean-libtool \
1300         distclean-tags
1301
1302 dvi: dvi-recursive
1303
1304 dvi-am:
1305
1306 html: html-recursive
1307
1308 html-am:
1309
1310 info: info-recursive
1311
1312 info-am:
1313
1314 install-data-am: install-data-local install-pkgdataDATA
1315         @$(NORMAL_INSTALL)
1316         $(MAKE) $(AM_MAKEFLAGS) install-data-hook
1317 install-dvi: install-dvi-recursive
1318
1319 install-dvi-am:
1320
1321 install-exec-am: install-exec-local
1322         @$(NORMAL_INSTALL)
1323         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1324 install-html: install-html-recursive
1325
1326 install-html-am:
1327
1328 install-info: install-info-recursive
1329
1330 install-info-am:
1331
1332 install-man:
1333
1334 install-pdf: install-pdf-recursive
1335
1336 install-pdf-am:
1337
1338 install-ps: install-ps-recursive
1339
1340 install-ps-am:
1341
1342 installcheck-am:
1343
1344 maintainer-clean: maintainer-clean-recursive
1345         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1346         -rm -rf $(top_srcdir)/autom4te.cache
1347         -rm -f Makefile
1348 maintainer-clean-am: distclean-am maintainer-clean-generic
1349
1350 mostlyclean: mostlyclean-recursive
1351
1352 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1353
1354 pdf: pdf-recursive
1355
1356 pdf-am:
1357
1358 ps: ps-recursive
1359
1360 ps-am:
1361
1362 uninstall-am: uninstall-pkgdataDATA
1363
1364 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
1365         ctags-recursive install install-am install-data-am \
1366         install-exec-am install-strip tags-recursive
1367
1368 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1369         all all-am am--refresh check check-am clean clean-generic \
1370         clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
1371         dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
1372         dist-zip distcheck distclean distclean-generic \
1373         distclean-libtool distclean-tags distcleancheck distdir \
1374         distuninstallcheck dvi dvi-am html html-am info info-am \
1375         install install-am install-data install-data-am \
1376         install-data-hook install-data-local install-dvi \
1377         install-dvi-am install-exec install-exec-am install-exec-hook \
1378         install-exec-local install-html install-html-am install-info \
1379         install-info-am install-man install-pdf install-pdf-am \
1380         install-pkgdataDATA install-ps install-ps-am install-strip \
1381         installcheck installcheck-am installdirs installdirs-am \
1382         maintainer-clean maintainer-clean-generic mostlyclean \
1383         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1384         tags tags-recursive uninstall uninstall-am \
1385         uninstall-pkgdataDATA
1386
1387
1388 installperms-exec:
1389         @installperms="$(INSTALLPERMS_exec)"; \
1390         test -n "$$installperms" && echo "Setting installation permissions on executables"; \
1391         dest=; chown=; chmod=; \
1392         for cmd in $$installperms; do \
1393             case "$$cmd" in \
1394                 chown=amanda) \
1395                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1396                 dest=*|chown=*|chmod=*) \
1397                         echo "  ($$cmd)"; eval $$cmd;; \
1398                 *) $(do_file) ;; \
1399             esac; \
1400         done
1401
1402 installperms-data:
1403         @installperms="$(INSTALLPERMS_data)"; \
1404         dest=; chown=; chmod=; \
1405         for cmd in $$installperms; do \
1406             case "$$cmd" in \
1407                 chown=amanda) \
1408                         echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
1409                 dest=*|chown=*|chmod=*) \
1410                         echo "  ($$cmd)"; eval $$cmd;; \
1411                 *)  $(do_file) ;; \
1412             esac; \
1413         done
1414
1415 install-exec-hook: installperms-exec
1416 install-data-hook: installperms-data
1417
1418 # define a rule to initialize the installperms manifest file
1419 @WANT_INSTALLPERMS_TRUE@installperms-init:
1420 @WANT_INSTALLPERMS_FALSE@installperms-init:
1421 @WANT_INSTALLPERMS_FALSE@       rm -f "$(installperms_sh)"
1422
1423 libtool: $(LIBTOOL_DEPS)
1424         $(SHELL) ./config.status --recheck
1425
1426 # empty out the installperms manifest file when we start
1427 install-exec-local: installperms-init
1428 install-data-local: installperms-init
1429 $(CONFIG_STATUS): $(SNAPSHOT_STAMP)
1430 SNAPSHOT:
1431         : SNAPSHOT file was removed, will reconfigure...
1432
1433 lint:
1434         (cd amandad-src; make lint)
1435         (cd changer-src; make lint)
1436         (cd client-src; make lint)
1437         (cd common-src; make lint)
1438         (cd oldrecover-src; make lint)
1439         (cd recover-src; make lint)
1440         (cd restore-src; make lint)
1441         (cd server-src; make lint)
1442         (cd xfer-src; make lint)
1443
1444 dist-hook:
1445         find $(distdir)/. -name '*.test.c' -exec rm {} \;
1446
1447 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1448 # Otherwise a system limit (for SysV at least) may be exceeded.
1449 .NOEXPORT: