2019-11-29 |
Bdale Garbee | lose BOOT* pull-down resistors, switch to MAX-8Q GPS |
commit | commitdiff | tree | snapshot |
2019-11-14 |
Bdale Garbee | initial layout with BMX160 completed |
commit | commitdiff | tree | snapshot |
2019-09-25 |
Bdale Garbee | move to BMX160 IMU due to EOL on the 9250 |
commit | commitdiff | tree | snapshot |
2019-08-16 |
Bdale Garbee | rotate ADXL375 to match EasyMega orientation |
commit | commitdiff | tree | snapshot |
2019-07-28 |
Keith Packard | Switch pyro series resistors to 1k |
commit | commitdiff | tree | snapshot |
2019-07-11 |
Bdale Garbee | re-brand as version 4.0, update copyright year |
commit | commitdiff | tree | snapshot |
2019-01-15 |
Bdale Garbee | update layout to use new usb connector |
commit | commitdiff | tree | snapshot |
2019-01-15 |
Bdale Garbee | move to 11071 USB connector |
commit | commitdiff | tree | snapshot |
2019-01-15 |
Bdale Garbee | transition to lepton-eda and pcb-rnd |
commit | commitdiff | tree | snapshot |
2019-01-15 |
Bdale Garbee | include mfg in attribs |
commit | commitdiff | tree | snapshot |
2019-01-15 |
Bdale Garbee | Merge remote-tracking branch 'origin/separate-accel... |
commit | commitdiff | tree | snapshot |
2018-04-19 |
Bdale Garbee | Merge commit 'ea4cbfb' |
commit | commitdiff | tree | snapshot |
2018-04-01 |
Bdale Garbee | drop lipo charge current to 400mA |
commit | commitdiff | tree | snapshot |
2018-03-01 |
Keith Packard | Use separate SoC pin for ADXL375 MOSI separate-accel-mosi |
commit | commitdiff | tree | snapshot |
2018-02-26 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
2018-02-25 |
Bdale Garbee | swap accel interrupt lines at ARM SOC to ease routing |
commit | commitdiff | tree | snapshot |
2018-02-25 |
Bdale Garbee | we actually need to provide power to both accel power... |
commit | commitdiff | tree | snapshot |
2018-02-25 |
Bdale Garbee | update schematic to use ADXL375 as high-g accel |
commit | commitdiff | tree | snapshot |
2017-11-10 |
Bdale Garbee | move to Keith's ufqfpn24 footprint for MPU9250 fab-v3.0 |
commit | commitdiff | tree | snapshot |
2017-11-10 |
Bdale Garbee | replace 9250 footprint with corrected version |
commit | commitdiff | tree | snapshot |
2017-10-12 |
Bdale Garbee | lose the gps_pps net, ground IMU's FSYNC pin instead |
commit | commitdiff | tree | snapshot |
2017-10-12 |
Bdale Garbee | new version of pcb updated the file |
commit | commitdiff | tree | snapshot |
2016-11-04 |
Bdale Garbee | updated artwork for prototype of v3.0 |
commit | commitdiff | tree | snapshot |
2016-11-04 |
Bdale Garbee | replace MPU-6000 and HMC5883L with MPU-9250 for v3.0 |
commit | commitdiff | tree | snapshot |
2016-10-18 |
Bdale Garbee | lose 'provided' attributes, let pref parts database... |
commit | commitdiff | tree | snapshot |
2016-01-11 |
Bdale Garbee | meta-data updates for v2.0 build fab-v2.0 |
commit | commitdiff | tree | snapshot |
2015-11-26 |
Bdale Garbee | reduce pcb workspace size to board outline again, make... |
commit | commitdiff | tree | snapshot |
2015-11-15 |
Bdale Garbee | hide refdes associated with (new) servos connector |
commit | commitdiff | tree | snapshot |
2015-11-15 |
Bdale Garbee | mark loadstatus invisible on all parts |
commit | commitdiff | tree | snapshot |
2015-11-14 |
Bdale Garbee | Merge branch 'master' of ssh://git.gag.com/scm/git... |
commit | commitdiff | tree | snapshot |
2015-11-13 |
Keith Packard | Forward component changes from sch to pcb |
commit | commitdiff | tree | snapshot |
2015-10-29 |
Bdale Garbee | elide remaining refdes from silk |
commit | commitdiff | tree | snapshot |
2015-10-25 |
Bdale Garbee | move to CC1200 and 40mhz rock, fix some attributes |
commit | commitdiff | tree | snapshot |
2015-10-25 |
Bdale Garbee | move to use of preferred parts database |
commit | commitdiff | tree | snapshot |
2015-09-20 |
Bdale Garbee | add explicit NC symbols to unconnected pins on schemati... |
commit | commitdiff | tree | snapshot |
2015-09-20 |
Bdale Garbee | re-map cs_companionN pins to match EasyMega, allows... |
commit | commitdiff | tree | snapshot |
2015-09-20 |
Bdale Garbee | elide dangling uart1 pin connections on soc |
commit | commitdiff | tree | snapshot |
2015-08-18 |
Bdale Garbee | forward annotate value changes to PCB fab-v1.1 |
commit | commitdiff | tree | snapshot |
2015-08-18 |
Bdale Garbee | conventional wisdom appears to be 220 ohms on the PWM... |
commit | commitdiff | tree | snapshot |
2015-08-17 |
Bdale Garbee | use locking connector for servo PWM outputs |
commit | commitdiff | tree | snapshot |
2015-08-17 |
Bdale Garbee | lose the spi2 snubbers we've never used, replace serial... |
commit | commitdiff | tree | snapshot |
2014-10-27 |
Bdale Garbee | fix DRC violation following LED symbol replacement fab-v1.0b |
commit | commitdiff | tree | snapshot |
2014-10-26 |
Keith Packard | Switch to mouse for LM293QT |
commit | commitdiff | tree | snapshot |
2014-10-26 |
Bdale Garbee | update layout to use dual LED footprint with cathode... |
commit | commitdiff | tree | snapshot |
2014-10-26 |
Bdale Garbee | fix 4ucon part number |
commit | commitdiff | tree | snapshot |
2014-01-16 |
Bdale Garbee | add support for generating pdf files |
commit | commitdiff | tree | snapshot |
2014-01-16 |
Bdale Garbee | move to 4ucon connectors |
commit | commitdiff | tree | snapshot |
2013-12-19 |
Bdale Garbee | lose the "pad" in the GPS patch footprint |
commit | commitdiff | tree | snapshot |
2013-11-08 |
Bdale Garbee | answer to question from AC |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | updated Makefile to include dk and mouser targets, etc fab-v1.0 |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | update attributes to reflect available part stock at DK |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | noload the screw terminal strips (coming from 4ucon... |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | hide all refdes to keep the silk from being a mess |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | move LED resistor farther from SW corner mounting screw... |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Keith Packard | Component updates for availability |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | fix LM293 part number at DK to one we can actually buy |
commit | commitdiff | tree | snapshot |
2013-10-24 |
Bdale Garbee | elide snubbers on SPI 1, minor via shoving to improve... |
commit | commitdiff | tree | snapshot |
2013-10-11 |
Bdale Garbee | more clearance between v_ldo_in and the screw in the... |
commit | commitdiff | tree | snapshot |
2013-10-11 |
Bdale Garbee | new cap size for LDO input |
commit | commitdiff | tree | snapshot |
2013-10-11 |
Bdale Garbee | change to smaller physical part for the LDO input cap |
commit | commitdiff | tree | snapshot |
2013-10-06 |
Bdale Garbee | Merge branch 'passive' |
commit | commitdiff | tree | snapshot |
2013-10-06 |
Bdale Garbee | Merge branch 'passive' |
commit | commitdiff | tree | snapshot |
2013-09-14 |
Bdale Garbee | get the pyro circuit resistor values right passive |
commit | commitdiff | tree | snapshot |
2013-08-09 |
Bdale Garbee | copper tweaking fab-phoenix |
commit | commitdiff | tree | snapshot |
2013-08-09 |
Bdale Garbee | clean up some copper issues fab-phoenix-p |
commit | commitdiff | tree | snapshot |
2013-08-07 |
Keith Packard | Change comparator dividers to hit 3.52V v_ldo_in before... |
commit | commitdiff | tree | snapshot |
2013-08-07 |
Keith Packard | Change comparator dividers to hit 3.52V v_ldo_in before... |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Bdale Garbee | CPU is much cheaper at Avnet than at DK |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Bdale Garbee | route complete, passes DRC |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Bdale Garbee | change version to 0.4 P for passive GPS antenna option |
commit | commitdiff | tree | snapshot |
2013-08-04 |
Bdale Garbee | change version to 0.4 A for active GPS antenna option |
commit | commitdiff | tree | snapshot |
2013-07-09 |
Bdale Garbee | initial placement of saw filter and passive patch |
commit | commitdiff | tree | snapshot |
2013-07-09 |
Bdale Garbee | not sure what changed |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Bdale Garbee | use 1k for all the LED current limits, eliminates a... |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Bdale Garbee | regularize resistor attributes to use Panasonic 0.1W... |
commit | commitdiff | tree | snapshot |
2013-05-16 |
Bdale Garbee | change FET gate series resistors to 549 ohms |
commit | commitdiff | tree | snapshot |
2013-05-15 |
Bdale Garbee | forward-annotate resistor value changes, etc |
commit | commitdiff | tree | snapshot |
2013-05-15 |
Bdale Garbee | simplify reset connections to u-blox GPS receiver |
commit | commitdiff | tree | snapshot |
2013-05-07 |
Bdale Garbee | fill in missing part atributes for v0.3 load |
commit | commitdiff | tree | snapshot |
2013-05-07 |
Bdale Garbee | lose the muffin pdf during a clean |
commit | commitdiff | tree | snapshot |
2013-04-23 |
Bdale Garbee | add muffin label generation, clean up some attributes |
commit | commitdiff | tree | snapshot |
2013-04-22 |
Bdale Garbee | rename MegaMetrum to TeleMega |
commit | commitdiff | tree | snapshot |
2013-03-26 |
Bdale Garbee | add a series resistor in the reset line to the GPS... fab-v0.3 |
commit | commitdiff | tree | snapshot |
2013-03-22 |
Bdale Garbee | route complete, drc clean |
commit | commitdiff | tree | snapshot |
2013-03-21 |
Bdale Garbee | update to include new pyro circuit .. placement done... |
commit | commitdiff | tree | snapshot |
2013-03-20 |
Bdale Garbee | prepare for overlay of new pyro circuit |
commit | commitdiff | tree | snapshot |
2013-03-18 |
Bdale Garbee | move to altusmetrum symbols |
commit | commitdiff | tree | snapshot |
2013-03-15 |
Bdale Garbee | added usb resistors, route complete and drc clean |
commit | commitdiff | tree | snapshot |
2013-03-15 |
Bdale Garbee | route complete |
commit | commitdiff | tree | snapshot |
2013-03-02 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
2013-02-24 |
Bdale Garbee | reworking layout after taking passive patch off |
commit | commitdiff | tree | snapshot |
2013-02-24 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
2013-02-23 |
Bdale Garbee | connect mag sensor to stm |
commit | commitdiff | tree | snapshot |
2013-02-23 |
Bdale Garbee | add the magnetic sensor back to the board |
commit | commitdiff | tree | snapshot |
2013-02-23 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
2013-02-18 |
Bdale Garbee | mid-route on the updated FET parts |
commit | commitdiff | tree | snapshot |
2013-02-18 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
2013-02-18 |
Bdale Garbee | move from FDS9926A to Si7232DN dual FETs |
commit | commitdiff | tree | snapshot |
2013-02-18 |
Bdale Garbee | rotated GPS chip and rerouted to get more separation... |
commit | commitdiff | tree | snapshot |
next |