2011-07-01 |
Bdale Garbee | snapshot work to date .. not quite fully routed, not... |
commit | commitdiff | tree | snapshot |
2011-06-11 |
Bdale Garbee | shove parts around to get the switch set back suitably... |
commit | commitdiff | tree | snapshot |
2011-06-10 |
Bdale Garbee | strip silkscreen from the USB micro B connector, and... |
commit | commitdiff | tree | snapshot |
2011-06-08 |
Bdale Garbee | notch the board edge to account for SMA bulkhead thickness |
commit | commitdiff | tree | snapshot |
2011-06-07 |
Bdale Garbee | initial work on a rotated placement .. lots still to do |
commit | commitdiff | tree | snapshot |
2011-05-11 |
Bdale Garbee | fix the led net name to match the blue led color |
commit | commitdiff | tree | snapshot |
2011-04-26 |
Bdale Garbee | tweak board dimensions down to match outline fab-v0.1 |
commit | commitdiff | tree | snapshot |
2011-04-22 |
Bdale Garbee | meet minimum silk line dimension on beeper circle |
commit | commitdiff | tree | snapshot |
2011-04-22 |
Bdale Garbee | fix soldermask clearance on sma footprint |
commit | commitdiff | tree | snapshot |
2011-04-22 |
Bdale Garbee | meet min annular ring dimension spec on mounting holes... |
commit | commitdiff | tree | snapshot |
2011-04-21 |
Bdale Garbee | fix targets so make zip works |
commit | commitdiff | tree | snapshot |
2011-04-21 |
Bdale Garbee | connect a spare cc1111 pin to the open pin on the compa... |
commit | commitdiff | tree | snapshot |
2011-04-21 |
Bdale Garbee | add TP2 attached to v_usb so we can experiment with... |
commit | commitdiff | tree | snapshot |
2011-04-21 |
Bdale Garbee | cts and rts need to be cross-connected between the... |
commit | commitdiff | tree | snapshot |
2011-04-19 |
Bdale Garbee | mark the serial pullups as noload, keithp says they... |
commit | commitdiff | tree | snapshot |
2011-04-18 |
Bdale Garbee | move bt_link to correct pin as per keithp feedback |
commit | commitdiff | tree | snapshot |
2011-04-18 |
Bdale Garbee | improvements in ground plane continuity, better spacing... |
commit | commitdiff | tree | snapshot |
2011-04-18 |
Bdale Garbee | fix beeper interference with sma |
commit | commitdiff | tree | snapshot |
2011-04-18 |
Bdale Garbee | resolve switch / sma interference issue by moving switc... |
commit | commitdiff | tree | snapshot |
2011-04-18 |
Bdale Garbee | route complete, drc clean, added the usual silkscreen... |
commit | commitdiff | tree | snapshot |
2011-04-16 |
Bdale Garbee | pull ground plane back away from BT antenna, work more... |
commit | commitdiff | tree | snapshot |
2011-04-14 |
Bdale Garbee | adjust placement to account for pcb dimension reduction |
commit | commitdiff | tree | snapshot |
2011-04-14 |
Bdale Garbee | shave 50 mils off SMA end of PCB to allow for SMA flang... |
commit | commitdiff | tree | snapshot |
2011-04-12 |
Bdale Garbee | snapshot |
commit | commitdiff | tree | snapshot |
2011-04-12 |
Bdale Garbee | working on placement |
commit | commitdiff | tree | snapshot |
2011-04-12 |
Bdale Garbee | connect both VDD pins on BT module, add a second bypass... |
commit | commitdiff | tree | snapshot |
2011-04-12 |
Bdale Garbee | add beeper |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | pcb syncronized with schematic, all parts on board... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | move the "ground plane" to the "top" of the board since... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | fix hole size in schematic to match 1551K mounting... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | lock the outline, the bottom poly and boundary vestigal... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | expand bottom poly to full board size, then clone outli... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | holes moved to the right places for maximum size 1551K... |
commit | commitdiff | tree | snapshot |
2011-04-10 |
Bdale Garbee | outline now matches Hammond max PCB size for 1551K box |
commit | commitdiff | tree | snapshot |
2011-04-09 |
Bdale Garbee | Outline and hole positions right for board that is... |
commit | commitdiff | tree | snapshot |
2011-04-08 |
Bdale Garbee | update to use freshly generated Rayson module footprint |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | keithp found this doc |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | loss the vdd_usb connection on the BT chip |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | hook up vdd_usb on the bt chip, add a bypass cap |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | add bt_link net to monitor link status, fix LED colors... |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | hook up pin on BT widget that would allow us to reset... |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | replace BTM182 datasheet with fresher copy from the... |
commit | commitdiff | tree | snapshot |
2011-04-05 |
Bdale Garbee | symbols needed for schematic |
commit | commitdiff | tree | snapshot |
2011-04-03 |
Bdale Garbee | first cut at schematic more or less complete |
commit | commitdiff | tree | snapshot |
2011-03-31 |
Bdale Garbee | a few more component changes, initial (worthless) pcb... |
commit | commitdiff | tree | snapshot |
2011-03-31 |
Bdale Garbee | move to micro USB, add my favorite push button power... |
commit | commitdiff | tree | snapshot |
2011-03-31 |
Bdale Garbee | add datasheets to git repo, even though most of them... |
commit | commitdiff | tree | snapshot |
2011-03-30 |
Bdale Garbee | initial cut at stripping schematic down .. forget pcb... |
commit | commitdiff | tree | snapshot |
2011-01-26 |
Bdale Garbee | initialize project with a copy of telemetrum v1.1 |
commit | commitdiff | tree | snapshot |
|