2020-12-28 |
Bdale Garbee | captured some more thoughts on connectoring
|
commit | commitdiff | tree |
2020-11-12 |
Bdale Garbee | update schematic metadata to use larger flash chip
|
commit | commitdiff | tree |
2020-10-25 |
Bdale Garbee | add a serial number block to top silk
|
commit | commitdiff | tree |
2020-10-25 |
Bdale Garbee | forward annotate netname information to pcb
|
commit | commitdiff | tree |
2020-10-25 |
Bdale Garbee | update schematic to properly reflect unconnected SOC...
|
commit | commitdiff | tree |
2020-10-25 |
Bdale Garbee | document screw terminals for strand burner daughter...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | put header back in exactly the right position
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | capture more thoughts about daughter cards, etc
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | route complete, drc clean, could use another visual...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | modify header pinout to support strand burner daughter...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | rationalize screw strip values in pref parts
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | getting there
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | 40 pin header fully wired up
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | PC* all routed to header, drc clean
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | apparently have fixed the color errors
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | work in progress, two color errors I need to fix in...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | update layer colors, lots of work done on routing
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | work in progress
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | work in progress .. 3.3V and GND apparently shorted...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | move to smaller 16 MHz CPU crystal, start assigning...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | snapshot before editing .lht directly
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | lots of work on placement for revised and simplified...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | change board to 3x3 inches, add 40-pin header for expansion...
|
commit | commitdiff | tree |
2020-10-21 |
Bdale Garbee | add header for ADC spi channel to aid debugging
|
commit | commitdiff | tree |
2020-05-18 |
Bdale Garbee | let attribs be automatically handled
|
commit | commitdiff | tree |
2020-01-18 |
Bdale Garbee | notes on how this should evolve
|
commit | commitdiff | tree |
2019-07-29 |
Bdale Garbee | change FET input series resistors to 1k
|
commit | commitdiff | tree |
2019-04-22 |
Bdale Garbee | add a silk rectangle for serial number
|
commit | commitdiff | tree |
2019-03-27 |
Bdale Garbee | add p-fet battery polarity protection
|
commit | commitdiff | tree |
2019-03-27 |
Bdale Garbee | add another resistor so we can detect a FET that fails...
|
commit | commitdiff | tree |
2019-03-27 |
Bdale Garbee | move to MicroMatch for thermistor cabling, reduce board...
|
commit | commitdiff | tree |
2019-03-25 |
Bdale Garbee | swap armed and continuity LEDs to ease routing
|
commit | commitdiff | tree |
2019-03-10 |
Bdale Garbee | switch to ADS131A04 for the sensor ADC
|
commit | commitdiff | tree |
2019-03-10 |
Bdale Garbee | change thermistor connector to 2x5 header for easy...
|
commit | commitdiff | tree |
2019-02-17 |
Bdale Garbee | fix silk screen polarity markings on siren and strobe...
|
commit | commitdiff | tree |
2019-02-09 |
Bdale Garbee | update copyright assertion to 2019
|
commit | commitdiff | tree |
2018-12-05 |
Bdale Garbee | route complete, drc clean, could use copper massaging...
|
commit | commitdiff | tree |
2018-12-05 |
Bdale Garbee | a pile more work on the layout
|
commit | commitdiff | tree |
2018-12-05 |
Bdale Garbee | snapshot massive amounts of work today on new board...
|
commit | commitdiff | tree |
2018-11-24 |
Bdale Garbee | initial cut at schematic for test stand v3, still needs...
|
commit | commitdiff | tree |
|