git.gag.com Git - hw/chaoskey/search

]> git.gag.com Git - hw/chaoskey/search

2016-05-19	Keith Packard	Respond to seeed DFM report Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-04-04	Keith Packard	Replace SoC footprint (again). Make all vias the same... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-03-09	Keith Packard	Switch LED current-limit resistor to 220Ω Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-03-07	Keith Packard	Swap STM footprint for fewer edges. Fix mask on LDO... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-02-21	Keith Packard	Switch 1uF cap to 35V part Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-02-08	Keith Packard	Add red LED Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-02-08	Keith Packard	Use smaller traces for signal runs Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-02-08	Keith Packard	G6 part has pin 18 as VDDIO2, not GPIO Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-20	Keith Packard	Resize J6 name on PCB Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-19	Keith Packard	Add outline bits to USB connector slots Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-19	Keith Packard	Add force-flash pin. Move components to preferred-parts. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-19	Keith Packard	Switch to 28-pin QFN process. Rework for tiny box. Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-18	Keith Packard	Remove spurious comma from transistor mfg part number Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-18	Keith Packard	Fix attributes to build complete parts list Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-18	Keith Packard	Fix fill on bottom to follow the outline Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-18	Keith Packard	Replace USB footprint with updated version including... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2016-01-17	Keith Packard	Use 27k resistors on the input to create a false ground Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-12-29	Keith Packard	Switch to shared build system. Move project name on... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-12-29	Keith Packard	Use op-amp instead of transistor Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-03-20	Keith Packard	Connect high voltage shutdown pin to CPU Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-03-16	Keith Packard	Rename to 'ChaosKey' Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-03-05	Keith Packard	Remove spurious .pcb files	commit \| commitdiff \| tree
2015-02-25	Keith Packard	Switch to usbAmale connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-25	Keith Packard	Switch to the usbAmale connector Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-12	Keith Packard	Fix attributes with gattrib Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-10	Keith Packard	Shove ink around to make it usable for loading boards Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-10	Keith Packard	Use the available LQFP-32 package Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-09	Keith Packard	Fix STM32F042 part number to reflect desired package Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-02-02	Keith Packard	Finish single source version Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-01-30	Keith Packard	Start work on single high-voltage source version Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-01-06	Keith Packard	Use keithp-friendly muffin template Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2015-01-06	Keith Packard	Switch one MSOP8 pad from round to square Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-12-26	Keith Packard	Fix D2 goof-up. Adjust value silk positions Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-12-26	Keith Packard	Fix component values and DK parts numbers Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-12-24	Keith Packard	Add words to the back silk	commit \| commitdiff \| tree
2014-12-24	Keith Packard	Layout version with dual noise sources and STM32F042... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-12-24	Keith Packard	Add a 20V darlington source. Switch to STM32F042 (Schematic... Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree
2014-12-24	Keith Packard	Shuffle board part labels around to make them usable Signed-off-by: Keith Packard <keithp@keithp.com>	commit \| commitdiff \| tree

USB true (hardware) random number generator

RSS Atom