]>
git.gag.com Git - hw/altusmetrum/log
Bdale Garbee [Thu, 18 May 2017 14:37:18 +0000 (08:37 -0600)]
add datasheet for CREE LEDs used on TeleFireOne
Keith Packard [Sat, 13 May 2017 02:56:44 +0000 (19:56 -0700)]
Add 7-pin 50mil spaced header footprint
Keith Packard [Sat, 13 May 2017 02:55:24 +0000 (19:55 -0700)]
Add RN4678 PICtail document
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 May 2017 02:54:22 +0000 (19:54 -0700)]
Add microchip RN4678 BT/LE module
Keith Packard [Mon, 1 May 2017 17:54:51 +0000 (10:54 -0700)]
Add bm70 docs
Bdale Garbee [Thu, 11 May 2017 15:39:17 +0000 (09:39 -0600)]
add SEEED PCB DFM manual to our docs
Bdale Garbee [Sat, 6 May 2017 04:35:28 +0000 (21:35 -0700)]
CAN controller/transceiver AMSAT told to use for LTI project
Bdale Garbee [Tue, 2 May 2017 17:11:16 +0000 (11:11 -0600)]
datasheet and user guilde for the RN4678 dual-mode Bluetooth module
Keith Packard [Wed, 19 Apr 2017 22:29:36 +0000 (15:29 -0700)]
Add USB connector for telelcotwo
Keith Packard [Sun, 2 Apr 2017 00:07:10 +0000 (17:07 -0700)]
When creating partslists, use $(SCHEMATICS) instead of $(PROJECT).sch
Some projects have schematics split across multiple files.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 7 Apr 2017 19:57:36 +0000 (13:57 -0600)]
fix broken pin numbering on second side
Bdale Garbee [Wed, 5 Apr 2017 05:52:43 +0000 (23:52 -0600)]
data sheet for ps/2 connector on cortex elf board
Bdale Garbee [Wed, 29 Mar 2017 23:40:53 +0000 (17:40 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Wed, 29 Mar 2017 23:40:36 +0000 (17:40 -0600)]
combine data sheets into a single dir for Diodes, Inc
Keith Packard [Mon, 13 Mar 2017 04:32:33 +0000 (21:32 -0700)]
Add FT230XS as used by µPusb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 12 Mar 2017 01:08:16 +0000 (17:08 -0800)]
Add right-angle blue LED datasheet
Keith Packard [Wed, 8 Mar 2017 06:59:42 +0000 (22:59 -0800)]
Add edge-mount powered GPS antenna AP.10G.01
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 6 Mar 2017 23:21:25 +0000 (16:21 -0700)]
4ucon parts arrived, new micro USB from them is now our default
Keith Packard [Fri, 3 Mar 2017 15:48:56 +0000 (07:48 -0800)]
Make assembly zip files depend on .xy file
There was a missing dependency, leading to a lack of component
positioning data in the files sent off to various assembly
houses. Adding these dependencies ensures that the files are built
(and rebuilt) as necessary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 23 Feb 2017 14:10:17 +0000 (06:10 -0800)]
Remove zip files before re-creating
Zip will modify an existing file, leaving files which are not on the
command line in the resulting archive. Removing the target before
executing the command ensures that the right bits land.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 25 Feb 2017 22:39:44 +0000 (15:39 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sat, 25 Feb 2017 22:22:05 +0000 (15:22 -0700)]
add more PnP data on parts I've handled today
Bdale Garbee [Sat, 25 Feb 2017 22:18:55 +0000 (15:18 -0700)]
rework 'stencil' target to be for home use
Keith Packard [Tue, 21 Feb 2017 07:31:03 +0000 (23:31 -0800)]
Provide option to use tall beeper with smaller footprint
The smaller footprint uses (oddly) less space on the board, making it
work better for TeleMini. There's no reason to use the short beeper
though; they fit the same holes, and the screw terminals on telemini
are already taller than even the tall beeper.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Feb 2017 05:05:58 +0000 (21:05 -0800)]
Shrink copper and silk around M2 hole
This uses the values from the M2.5 hole, instead of the M3 hole,
making the hole take up a bunch less board space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Feb 2017 05:05:24 +0000 (21:05 -0800)]
Provide solder mask clearance around M2.5 hole
This keeps freedfm happy.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:16:50 +0000 (08:16 -0800)]
Add 6-pin 50mil space pin header
Just one more pin for TeleMini
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:16:07 +0000 (08:16 -0800)]
Add STM32L152VBT6 and 330Ω 0402 to preferred parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:14:49 +0000 (08:14 -0800)]
Set default glabels data file to /dev/null
This avoids warnings when launching glabels-3
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 8 Feb 2017 09:58:30 +0000 (02:58 -0700)]
different 2.2pF Murata cap for availability, new parts for pnpservo
Bdale Garbee [Thu, 2 Feb 2017 07:41:14 +0000 (00:41 -0700)]
fix wrong pin number on symbol
Bdale Garbee [Thu, 2 Feb 2017 06:54:11 +0000 (23:54 -0700)]
16-output LED/PWM controller for use with RC servos on pnpservo board
Bdale Garbee [Thu, 2 Feb 2017 06:53:32 +0000 (23:53 -0700)]
update metadata for TM v2.0b-2017 build
Bdale Garbee [Tue, 24 Jan 2017 19:47:28 +0000 (12:47 -0700)]
TI design note regarding use of Johanson balun/filter modules
Bdale Garbee [Tue, 24 Jan 2017 19:44:51 +0000 (12:44 -0700)]
add schematic symbol for Johanson balun/filter module
Bdale Garbee [Tue, 24 Jan 2017 19:38:10 +0000 (12:38 -0700)]
add JTI 433Mhz balun/filter module to preferred parts list
Bdale Garbee [Tue, 24 Jan 2017 19:37:53 +0000 (12:37 -0700)]
remove spurious '4' from SMT part footprint names
Bdale Garbee [Tue, 24 Jan 2017 19:23:38 +0000 (12:23 -0700)]
add footprint for Johanson balun/filter module, 50mil6pin
Bdale Garbee [Tue, 24 Jan 2017 17:10:32 +0000 (10:10 -0700)]
footprint for Johanson balun/filter combined modules used with cc1111, et al
Bdale Garbee [Tue, 24 Jan 2017 16:57:35 +0000 (09:57 -0700)]
integrated balun/filter for 915 Mhz cc1111 min-area designs
Bdale Garbee [Tue, 24 Jan 2017 16:55:46 +0000 (09:55 -0700)]
integrated balun/filter for small area designs with cc1111, et al
Bdale Garbee [Sat, 7 Jan 2017 19:20:42 +0000 (12:20 -0700)]
reel width of ublox MAX parts is known, too
Bdale Garbee [Sat, 7 Jan 2017 19:16:30 +0000 (12:16 -0700)]
add PnP format column to preferred parts database, populate with what I know right now
Bdale Garbee [Thu, 5 Jan 2017 18:16:48 +0000 (11:16 -0700)]
data sheet for our "new" micro USB connector from 4ucon
Bdale Garbee [Thu, 22 Dec 2016 16:26:25 +0000 (09:26 -0700)]
50mil spacing 3-pin header for random jumpering use
Bdale Garbee [Wed, 21 Dec 2016 07:48:57 +0000 (00:48 -0700)]
make drc target use all defined schematic sheets
Bdale Garbee [Thu, 15 Dec 2016 21:02:07 +0000 (14:02 -0700)]
update symbol to put Vdda pin on the end for easier filter layout
Bdale Garbee [Thu, 15 Dec 2016 20:36:06 +0000 (13:36 -0700)]
new symbol for 48-lead STM32F042 variant
Bdale Garbee [Thu, 1 Dec 2016 08:18:47 +0000 (01:18 -0700)]
first cut at footprint for the BTle module
Bdale Garbee [Thu, 1 Dec 2016 07:30:49 +0000 (00:30 -0700)]
symbol for Microchip Bluetooth LE module BM70BLES1FC2
Bdale Garbee [Sun, 20 Nov 2016 22:39:44 +0000 (15:39 -0700)]
add ST3232C symbol
Bdale Garbee [Sun, 20 Nov 2016 21:42:47 +0000 (14:42 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 20 Nov 2016 21:42:24 +0000 (14:42 -0700)]
capture all the things I hadn't put in git yet... sigh
Bdale Garbee [Sun, 20 Nov 2016 19:16:14 +0000 (12:16 -0700)]
add footprint for PS/2 keyboard connector
Bdale Garbee [Sun, 20 Nov 2016 18:05:53 +0000 (11:05 -0700)]
add footprints for VGA connector, etc
Bdale Garbee [Sun, 20 Nov 2016 17:22:43 +0000 (10:22 -0700)]
data sheet for VGA connector series I like
Bdale Garbee [Sun, 20 Nov 2016 17:16:41 +0000 (10:16 -0700)]
add male Norcomp D-shell connectors needed for elf
Bdale Garbee [Sun, 20 Nov 2016 17:07:15 +0000 (10:07 -0700)]
Norcomp data sheets for D-shell connectors used on cncfpga, elf, etc
Bdale Garbee [Fri, 18 Nov 2016 02:50:06 +0000 (19:50 -0700)]
add a pin 9 to ground mounting screws
Bdale Garbee [Fri, 18 Nov 2016 02:26:53 +0000 (19:26 -0700)]
complete this footprint, including putting the pins in the right places... I think!
Bdale Garbee [Fri, 4 Nov 2016 15:34:36 +0000 (09:34 -0600)]
move power pins on MPU9250 symbol to simplify schematics
Bdale Garbee [Fri, 4 Nov 2016 15:27:49 +0000 (09:27 -0600)]
move MPU9250 pin 20 on symbol to simplify schematics
Bdale Garbee [Fri, 4 Nov 2016 15:22:16 +0000 (09:22 -0600)]
new symbol and footprint for MPU-9250 from Invensense
Keith Packard [Mon, 17 Oct 2016 20:21:34 +0000 (13:21 -0700)]
Source STM32L151CBU6 from avnet
Newark is out of stock until feb
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 Oct 2016 00:13:45 +0000 (18:13 -0600)]
I just bought all the MMA6555 available, so mark those as 'provided'
Bdale Garbee [Tue, 18 Oct 2016 23:55:42 +0000 (17:55 -0600)]
fix leading space on saw part number
Bdale Garbee [Tue, 18 Oct 2016 23:52:18 +0000 (17:52 -0600)]
updates based on availability in prep for Tmega run at AC
Bdale Garbee [Mon, 17 Oct 2016 23:33:32 +0000 (17:33 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Mon, 17 Oct 2016 20:15:34 +0000 (13:15 -0700)]
Replace SAW with epcos version. Get mag sensor from newark.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Oct 2016 20:00:33 +0000 (13:00 -0700)]
partslist-vendor: Deal with missing elements in CSV file
An empty string is valid; don't crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 4 Aug 2016 16:55:58 +0000 (10:55 -0600)]
update copyright year
Keith Packard [Sat, 16 Jul 2016 09:17:56 +0000 (02:17 -0700)]
Add ABM12 (1.60 mm x 1.20 mm) crystals in 40 and 32MHz
These are a bunch smaller than our normal crystals, allowing for
smaller boards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:59:24 +0000 (12:59 -0700)]
Remove silk outline from 0.25" lug footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:58:46 +0000 (12:58 -0700)]
Add 10-position rotary switch to preferred parts
Used by telefire as box id selector
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:58:13 +0000 (12:58 -0700)]
Remove spurious spaces from preferred-parts
Yes, this file cares about space vs tab, so be careful when editing it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:57:19 +0000 (12:57 -0700)]
Add goldphoenix target
This constructs all of the files necessary to run a product through
the gold phoenix turn-key system.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:56:26 +0000 (12:56 -0700)]
Fix DK part number for short beeper
Don't use the tall beeper part number...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:54:58 +0000 (12:54 -0700)]
Add goldphoenix as a possible partslist target
gold phoenix wants partslists in a specific format that include vendor
and manufacturer information.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:53:50 +0000 (12:53 -0700)]
nickle's parse_csv doesn't strip quotes, so we have to
This appears to just be a bug in the nickle code which has been fixed
upstream. This local fix only strips quotes if present, so it will
work with either nickle version unless we have names starting with "
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:51:58 +0000 (12:51 -0700)]
Add 'mfg' field to partslist csv output
We'll have to update preferred parts to match at some point, but this
at least makes it possible to generate a BOM including manufacturer names.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:51:30 +0000 (12:51 -0700)]
Add 'device' attribute to cc1200 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:50:55 +0000 (12:50 -0700)]
Move cc1200 docs to subdirectory
Start cleaning up the huge ti directory
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 10 Jul 2016 19:10:16 +0000 (21:10 +0200)]
more holes for a serial port on telegps
Bdale Garbee [Fri, 1 Jul 2016 17:28:43 +0000 (19:28 +0200)]
datasheet for Microchip BTLE module
Bdale Garbee [Fri, 1 Jul 2016 15:37:14 +0000 (17:37 +0200)]
update copyright year to 2016
Keith Packard [Thu, 19 May 2016 04:57:15 +0000 (21:57 -0700)]
Add ability to include more stuff with seeed .zip file
Useful for attaching test instructions or whatever
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 May 2016 00:12:15 +0000 (17:12 -0700)]
Add 3568 fuse holder and 8-pin big terminal for updated TeleFire
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 3 May 2016 00:12:04 +0000 (18:12 -0600)]
add the MPU-9250 register map document, too
Bdale Garbee [Tue, 3 May 2016 00:04:38 +0000 (18:04 -0600)]
add datasheet for MPU-9250 in anticipation of switching *Mega on next rev
Bdale Garbee [Thu, 21 Apr 2016 05:23:07 +0000 (23:23 -0600)]
34 pin header footprint
Bdale Garbee [Thu, 21 Apr 2016 04:21:01 +0000 (22:21 -0600)]
34 pin header for the plug in play autofeeder motor driver board
Bdale Garbee [Thu, 21 Apr 2016 03:54:08 +0000 (21:54 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Tue, 5 Apr 2016 20:35:07 +0000 (13:35 -0700)]
Add TeleMini v2.0 parts
TDK PS12 beeper with smaller holes.
22uF 0805 cap
MX25L4006E flash part
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 5 Apr 2016 20:33:50 +0000 (13:33 -0700)]
Remove vendor and part numbers from mx25l symbol.
These collide with our preferred parts scheme
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 18:05:01 +0000 (11:05 -0700)]
Add L78L33 for mppogo and mkds5n-5 for telefiretwo
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 15:24:15 +0000 (08:24 -0700)]
Make all pads in ufqfpn28 corners at least 6mils wide
This avoids complaints from DRC checking
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 15:23:15 +0000 (08:23 -0700)]
Add clearance around servo locating holes
Without clearance, oshpark plates the holes through.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:53:31 +0000 (19:53 -0700)]
Add 2-screw terminal to preferred parts
telemini v2.0 design is using this
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:52:39 +0000 (19:52 -0700)]
Fix weird corners on ufqfpn28
These have a hack to make the corners step to approximate a diagonal
line, but they were being drawn wrong, leaving too little space
between the corner and adjacent pads.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:51:56 +0000 (19:51 -0700)]
mlp8 4x3 footprint had pads in the wrong places
They were spaced too far from the center of the package and barely
touched the pads.
Signed-off-by: Keith Packard <keithp@keithp.com>