]>
git.gag.com Git - hw/altusmetrum/log
Bdale Garbee [Mon, 1 Jan 2018 06:31:51 +0000 (23:31 -0700)]
data sheets for u-blox products we might use someday
Bdale Garbee [Sun, 24 Dec 2017 19:38:20 +0000 (12:38 -0700)]
updated data sheets for interesting GPS chip antennas from Johanson
Bdale Garbee [Tue, 19 Dec 2017 19:05:50 +0000 (12:05 -0700)]
0.075 mm is closer to 3mils than 10, and 10 was clearly too much!
Bdale Garbee [Thu, 30 Nov 2017 05:41:24 +0000 (22:41 -0700)]
make the stencil target work for current pcb-rnd
Bdale Garbee [Sun, 12 Nov 2017 16:21:45 +0000 (09:21 -0700)]
more work on pcb-rnd makefile
Bdale Garbee [Fri, 10 Nov 2017 22:15:19 +0000 (15:15 -0700)]
eliminate MPU9250 footprint in favor of ufqfpn24
Keith Packard [Fri, 10 Nov 2017 22:11:58 +0000 (14:11 -0800)]
Have ufqfpn24 pads extend 0.4mm outside of package
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 22:10:22 +0000 (14:10 -0800)]
Remove silk rectangle around ufqfpn24 package
This was just for validation.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 21:40:23 +0000 (13:40 -0800)]
Add ufqfpn24 footprint (for MPU9250)
This is a 3mmx3mm 24-pin package with 0.4mm spacing and no central
pad. The corner pads are beveled by overlapping four pads to preserve
process spacing between them. The resulting spacing is about 8.4 mils
(0.21mm).
Solder mask is set to 0.05mm as specified in the MPU9250 docs.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Nov 2017 20:42:10 +0000 (12:42 -0800)]
Add a couple of alternate USBmicroB connectors
This makes it slightly easier to generate parts lists and track what
we used to build boards by just changing the value in the schematic.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 18 Oct 2017 15:17:46 +0000 (08:17 -0700)]
Ship FAB file to AC as $(PROJECT).fab
The assembly folks require this file
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 10 Nov 2017 17:31:55 +0000 (10:31 -0700)]
put the right part name in footprint
Bdale Garbee [Fri, 10 Nov 2017 17:23:32 +0000 (10:23 -0700)]
fix MPU-9250 footprint
Bdale Garbee [Fri, 10 Nov 2017 16:59:51 +0000 (09:59 -0700)]
version 1.1 of MPU-9250 datasheet from Invensense
Bdale Garbee [Tue, 31 Oct 2017 18:44:35 +0000 (12:44 -0600)]
substitute 40mhz rock with a part that's currently available
Bdale Garbee [Sat, 14 Oct 2017 00:00:48 +0000 (18:00 -0600)]
preferred parts updates in support of TeleMega v3 build
Bdale Garbee [Mon, 11 Sep 2017 21:50:52 +0000 (15:50 -0600)]
fix footprint default in ADS124S0X symbol
Bdale Garbee [Mon, 11 Sep 2017 15:50:03 +0000 (09:50 -0600)]
symbol, footprint, datasheets for ADS124S06 ADC from TI, for TeleFireOne v2
Bdale Garbee [Mon, 11 Sep 2017 14:21:40 +0000 (08:21 -0600)]
create assertionless E-sized title block
Bdale Garbee [Sun, 10 Sep 2017 01:47:13 +0000 (19:47 -0600)]
fix symbol metadata
Bdale Garbee [Sun, 10 Sep 2017 01:46:30 +0000 (19:46 -0600)]
fix symbol metadata
Bdale Garbee [Sun, 10 Sep 2017 01:46:00 +0000 (19:46 -0600)]
add a footprint for the ADS1220 ADC
Bdale Garbee [Sun, 10 Sep 2017 01:13:38 +0000 (19:13 -0600)]
fix pintype warnings on INA125, add a 16-pin 8x2 header footprint
Bdale Garbee [Sun, 10 Sep 2017 01:13:25 +0000 (19:13 -0600)]
basic things are working
Bdale Garbee [Sat, 9 Sep 2017 23:40:37 +0000 (17:40 -0600)]
schematic symbol for 24-bit, 4-input, SPI attached ADC
Bdale Garbee [Sat, 9 Sep 2017 22:56:26 +0000 (16:56 -0600)]
data sheet for external ADC on telefireone
Bdale Garbee [Thu, 10 Aug 2017 03:32:43 +0000 (23:32 -0400)]
can actually get the SOC at Mouser right now
Bdale Garbee [Thu, 10 Aug 2017 03:13:35 +0000 (23:13 -0400)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Thu, 10 Aug 2017 03:13:06 +0000 (23:13 -0400)]
move to 10V version of cap where 6.3V version isn't available .. same price!
Keith Packard [Wed, 9 Aug 2017 15:42:40 +0000 (11:42 -0400)]
Add connectors and enclosures for telefire and micropeak
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 9 Aug 2017 15:37:52 +0000 (11:37 -0400)]
switch W25Q16 to variant that's actually available at DK now
Bdale Garbee [Mon, 7 Aug 2017 01:26:29 +0000 (18:26 -0700)]
add ssop generator and make ssop-28 for CAN chip used by AMSAT LTI
Bdale Garbee [Sat, 5 Aug 2017 22:53:45 +0000 (15:53 -0700)]
schematic symbol for CAN chip AMSAT Fox derivative needs
Bdale Garbee [Thu, 22 Jun 2017 15:21:24 +0000 (09:21 -0600)]
due to DK stock levels, provide my 1k and 10k reels, and use different 56k
Bdale Garbee [Thu, 22 Jun 2017 14:50:22 +0000 (08:50 -0600)]
parts needed for TeleBT, best price on power switches right now
Bdale Garbee [Thu, 22 Jun 2017 14:34:21 +0000 (08:34 -0600)]
rename bluetooth module footprint to reflect part we're actually using
Bdale Garbee [Mon, 19 Jun 2017 22:10:24 +0000 (16:10 -0600)]
create a D-sized title block with no copyright or license assertion
Bdale Garbee [Thu, 8 Jun 2017 14:46:13 +0000 (08:46 -0600)]
updated Seeed DFM manual
Bdale Garbee [Thu, 18 May 2017 14:37:43 +0000 (08:37 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Thu, 18 May 2017 14:37:18 +0000 (08:37 -0600)]
add datasheet for CREE LEDs used on TeleFireOne
Keith Packard [Sat, 13 May 2017 02:56:44 +0000 (19:56 -0700)]
Add 7-pin 50mil spaced header footprint
Keith Packard [Sat, 13 May 2017 02:55:24 +0000 (19:55 -0700)]
Add RN4678 PICtail document
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 13 May 2017 02:54:22 +0000 (19:54 -0700)]
Add microchip RN4678 BT/LE module
Keith Packard [Mon, 1 May 2017 17:54:51 +0000 (10:54 -0700)]
Add bm70 docs
Bdale Garbee [Thu, 11 May 2017 15:39:17 +0000 (09:39 -0600)]
add SEEED PCB DFM manual to our docs
Bdale Garbee [Sat, 6 May 2017 04:35:28 +0000 (21:35 -0700)]
CAN controller/transceiver AMSAT told to use for LTI project
Bdale Garbee [Tue, 2 May 2017 17:11:16 +0000 (11:11 -0600)]
datasheet and user guilde for the RN4678 dual-mode Bluetooth module
Keith Packard [Wed, 19 Apr 2017 22:29:36 +0000 (15:29 -0700)]
Add USB connector for telelcotwo
Keith Packard [Sun, 2 Apr 2017 00:07:10 +0000 (17:07 -0700)]
When creating partslists, use $(SCHEMATICS) instead of $(PROJECT).sch
Some projects have schematics split across multiple files.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 7 Apr 2017 19:57:36 +0000 (13:57 -0600)]
fix broken pin numbering on second side
Bdale Garbee [Wed, 5 Apr 2017 05:52:43 +0000 (23:52 -0600)]
data sheet for ps/2 connector on cortex elf board
Bdale Garbee [Wed, 29 Mar 2017 23:40:53 +0000 (17:40 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Wed, 29 Mar 2017 23:40:36 +0000 (17:40 -0600)]
combine data sheets into a single dir for Diodes, Inc
Keith Packard [Mon, 13 Mar 2017 04:32:33 +0000 (21:32 -0700)]
Add FT230XS as used by µPusb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 12 Mar 2017 01:08:16 +0000 (17:08 -0800)]
Add right-angle blue LED datasheet
Keith Packard [Wed, 8 Mar 2017 06:59:42 +0000 (22:59 -0800)]
Add edge-mount powered GPS antenna AP.10G.01
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 6 Mar 2017 23:21:25 +0000 (16:21 -0700)]
4ucon parts arrived, new micro USB from them is now our default
Keith Packard [Fri, 3 Mar 2017 15:48:56 +0000 (07:48 -0800)]
Make assembly zip files depend on .xy file
There was a missing dependency, leading to a lack of component
positioning data in the files sent off to various assembly
houses. Adding these dependencies ensures that the files are built
(and rebuilt) as necessary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 23 Feb 2017 14:10:17 +0000 (06:10 -0800)]
Remove zip files before re-creating
Zip will modify an existing file, leaving files which are not on the
command line in the resulting archive. Removing the target before
executing the command ensures that the right bits land.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sat, 25 Feb 2017 22:39:44 +0000 (15:39 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sat, 25 Feb 2017 22:22:05 +0000 (15:22 -0700)]
add more PnP data on parts I've handled today
Bdale Garbee [Sat, 25 Feb 2017 22:18:55 +0000 (15:18 -0700)]
rework 'stencil' target to be for home use
Keith Packard [Tue, 21 Feb 2017 07:31:03 +0000 (23:31 -0800)]
Provide option to use tall beeper with smaller footprint
The smaller footprint uses (oddly) less space on the board, making it
work better for TeleMini. There's no reason to use the short beeper
though; they fit the same holes, and the screw terminals on telemini
are already taller than even the tall beeper.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Feb 2017 05:05:58 +0000 (21:05 -0800)]
Shrink copper and silk around M2 hole
This uses the values from the M2.5 hole, instead of the M3 hole,
making the hole take up a bunch less board space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 21 Feb 2017 05:05:24 +0000 (21:05 -0800)]
Provide solder mask clearance around M2.5 hole
This keeps freedfm happy.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:16:50 +0000 (08:16 -0800)]
Add 6-pin 50mil space pin header
Just one more pin for TeleMini
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:16:07 +0000 (08:16 -0800)]
Add STM32L152VBT6 and 330Ω 0402 to preferred parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Feb 2017 16:14:49 +0000 (08:14 -0800)]
Set default glabels data file to /dev/null
This avoids warnings when launching glabels-3
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 8 Feb 2017 09:58:30 +0000 (02:58 -0700)]
different 2.2pF Murata cap for availability, new parts for pnpservo
Bdale Garbee [Thu, 2 Feb 2017 07:41:14 +0000 (00:41 -0700)]
fix wrong pin number on symbol
Bdale Garbee [Thu, 2 Feb 2017 06:54:11 +0000 (23:54 -0700)]
16-output LED/PWM controller for use with RC servos on pnpservo board
Bdale Garbee [Thu, 2 Feb 2017 06:53:32 +0000 (23:53 -0700)]
update metadata for TM v2.0b-2017 build
Bdale Garbee [Tue, 24 Jan 2017 19:47:28 +0000 (12:47 -0700)]
TI design note regarding use of Johanson balun/filter modules
Bdale Garbee [Tue, 24 Jan 2017 19:44:51 +0000 (12:44 -0700)]
add schematic symbol for Johanson balun/filter module
Bdale Garbee [Tue, 24 Jan 2017 19:38:10 +0000 (12:38 -0700)]
add JTI 433Mhz balun/filter module to preferred parts list
Bdale Garbee [Tue, 24 Jan 2017 19:37:53 +0000 (12:37 -0700)]
remove spurious '4' from SMT part footprint names
Bdale Garbee [Tue, 24 Jan 2017 19:23:38 +0000 (12:23 -0700)]
add footprint for Johanson balun/filter module, 50mil6pin
Bdale Garbee [Tue, 24 Jan 2017 17:10:32 +0000 (10:10 -0700)]
footprint for Johanson balun/filter combined modules used with cc1111, et al
Bdale Garbee [Tue, 24 Jan 2017 16:57:35 +0000 (09:57 -0700)]
integrated balun/filter for 915 Mhz cc1111 min-area designs
Bdale Garbee [Tue, 24 Jan 2017 16:55:46 +0000 (09:55 -0700)]
integrated balun/filter for small area designs with cc1111, et al
Bdale Garbee [Sat, 7 Jan 2017 19:20:42 +0000 (12:20 -0700)]
reel width of ublox MAX parts is known, too
Bdale Garbee [Sat, 7 Jan 2017 19:16:30 +0000 (12:16 -0700)]
add PnP format column to preferred parts database, populate with what I know right now
Bdale Garbee [Thu, 5 Jan 2017 18:16:48 +0000 (11:16 -0700)]
data sheet for our "new" micro USB connector from 4ucon
Bdale Garbee [Thu, 22 Dec 2016 16:26:25 +0000 (09:26 -0700)]
50mil spacing 3-pin header for random jumpering use
Bdale Garbee [Wed, 21 Dec 2016 07:48:57 +0000 (00:48 -0700)]
make drc target use all defined schematic sheets
Bdale Garbee [Thu, 15 Dec 2016 21:02:07 +0000 (14:02 -0700)]
update symbol to put Vdda pin on the end for easier filter layout
Bdale Garbee [Thu, 15 Dec 2016 20:36:06 +0000 (13:36 -0700)]
new symbol for 48-lead STM32F042 variant
Bdale Garbee [Thu, 1 Dec 2016 08:18:47 +0000 (01:18 -0700)]
first cut at footprint for the BTle module
Bdale Garbee [Thu, 1 Dec 2016 07:30:49 +0000 (00:30 -0700)]
symbol for Microchip Bluetooth LE module BM70BLES1FC2
Bdale Garbee [Sun, 20 Nov 2016 22:39:44 +0000 (15:39 -0700)]
add ST3232C symbol
Bdale Garbee [Sun, 20 Nov 2016 21:42:47 +0000 (14:42 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 20 Nov 2016 21:42:24 +0000 (14:42 -0700)]
capture all the things I hadn't put in git yet... sigh
Bdale Garbee [Sun, 20 Nov 2016 19:16:14 +0000 (12:16 -0700)]
add footprint for PS/2 keyboard connector
Bdale Garbee [Sun, 20 Nov 2016 18:05:53 +0000 (11:05 -0700)]
add footprints for VGA connector, etc
Bdale Garbee [Sun, 20 Nov 2016 17:22:43 +0000 (10:22 -0700)]
data sheet for VGA connector series I like
Bdale Garbee [Sun, 20 Nov 2016 17:16:41 +0000 (10:16 -0700)]
add male Norcomp D-shell connectors needed for elf
Bdale Garbee [Sun, 20 Nov 2016 17:07:15 +0000 (10:07 -0700)]
Norcomp data sheets for D-shell connectors used on cncfpga, elf, etc
Bdale Garbee [Fri, 18 Nov 2016 02:50:06 +0000 (19:50 -0700)]
add a pin 9 to ground mounting screws
Bdale Garbee [Fri, 18 Nov 2016 02:26:53 +0000 (19:26 -0700)]
complete this footprint, including putting the pins in the right places... I think!
Bdale Garbee [Fri, 4 Nov 2016 15:34:36 +0000 (09:34 -0600)]
move power pins on MPU9250 symbol to simplify schematics