]>
git.gag.com Git - fw/altos/log
Keith Packard [Fri, 4 Jan 2013 02:14:40 +0000 (18:14 -0800)]
micropeak: Use data.export for Raw display. Change to MPH
data.export already knows how to format stuff, so use that to
construct the raw data presentation for the GUI too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 Jan 2013 01:40:19 +0000 (17:40 -0800)]
micropeak: Export in lots of units
meters, feet, mach and gs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 Jan 2013 01:31:01 +0000 (17:31 -0800)]
micropeak: Add command line export option
micropeak --export <foo.mpd> will create <foo.csv> full of useful data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 4 Jan 2013 01:30:29 +0000 (17:30 -0800)]
micropeak: Add Mac OS Info.plist file
needed to build a Mac OS X application
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jan 2013 00:30:44 +0000 (16:30 -0800)]
micropeak: Change graph tooltip units on the fly
Make sure the tooltips show the right units when they change
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jan 2013 00:19:33 +0000 (16:19 -0800)]
micropeak: Use JTextArea instead of TextArea
Looks nicer and doesn't appear to have the same weird clipping problem
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 3 Jan 2013 00:07:49 +0000 (16:07 -0800)]
altosuilib: Fix install issues on Linux
altosuilib.jar wasn't getting installed
micropeak was using the wrong name
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 20:24:44 +0000 (12:24 -0800)]
micropeak: Add view of raw data in GUI
Looks just like the export file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 19:44:32 +0000 (11:44 -0800)]
micropeak: Add CSV export
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 19:22:11 +0000 (11:22 -0800)]
micropoint: Add MicroDataPoint
This holds height/speed/accel data all in one place
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 18:48:56 +0000 (10:48 -0800)]
altoslib: Remove unused fake product_micropeak_serial
Code cleanups have made this no longer useful
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:50:09 +0000 (09:50 -0800)]
altosui: Remove duplicate AltosUSBDevice
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:41:42 +0000 (09:41 -0800)]
altosui: Use shared AltosUIListener
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:40:13 +0000 (09:40 -0800)]
altosui: Use shared AltosUIFrame and AltosUIDialog
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:33:36 +0000 (09:33 -0800)]
altosui: Use shared AltosFontListener class
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:31:35 +0000 (09:31 -0800)]
altosui: Use shared AltosDeviceDialog
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:09:10 +0000 (09:09 -0800)]
altosui: Remove AltosVersion.java
Version data now stored in AltosUIVersion.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:06:41 +0000 (09:06 -0800)]
altosui: Use altosuilib for configuration
Start moving to shared UI code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 17:06:22 +0000 (09:06 -0800)]
libaltos: Remove a couple of spurious debug printfs
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 07:15:14 +0000 (23:15 -0800)]
Rename AltosConfigureUI to AltosUIConfigure
Leave AltosConfigureUI for AltosUI
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 07:10:04 +0000 (23:10 -0800)]
micropeak: Check CRC on downloaded
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 07:03:29 +0000 (23:03 -0800)]
Build micropeak by default
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 02:20:23 +0000 (18:20 -0800)]
Build installable versions of MicroPeak GUI
Makes windows/mac/linux versions. Windows version appears to work on
Wine at least.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 01:10:55 +0000 (17:10 -0800)]
micropeak: Add 'Close' menu item. Fix start location
Let the window system pick a spot to place the application
windows. This avoids having them all sit on top of one another.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 2 Jan 2013 00:57:31 +0000 (16:57 -0800)]
micropeak: Fix chart colors
Need to apply custom colors after setting the theme
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 Jan 2013 23:30:11 +0000 (15:30 -0800)]
micropeak is code complete now.
Added save and download functionality. Removed 'new' from file menu.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 31 Dec 2012 22:24:59 +0000 (14:24 -0800)]
Merge remote-tracking branch 'origin/master' into micropeak-logging
Keith Packard [Mon, 31 Dec 2012 22:22:37 +0000 (14:22 -0800)]
Allow CC1120 to sit on other SPI busses
Reading the incoming data bypasses the SPI API and touches the SPI
data register directly; which port that is needs to be specified in
the pins file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 31 Dec 2012 22:17:26 +0000 (14:17 -0800)]
micropeak: Add flight stats pane
Shows graph or stats in alternate panes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 31 Dec 2012 19:42:57 +0000 (11:42 -0800)]
micropeak: Use altosuilib
This removes a pile of code stolen from altosui
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 31 Dec 2012 19:38:53 +0000 (11:38 -0800)]
altoslib: Add units change notification list
This allows the UI to automatically respond to changes in the
preferred units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 31 Dec 2012 19:32:56 +0000 (11:32 -0800)]
Create altosuilib to share code between altosui and micropeak
Need to convert altosui to using it, but that shouldn't be hard
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 29 Dec 2012 06:05:31 +0000 (23:05 -0700)]
altos: megadongle radio int is C13, not C14
Hard to get interrupts when listening to the wrong pin
Signed-off-by: Keith Packard <keithp@gag.com>
Keith Packard [Sat, 29 Dec 2012 05:50:13 +0000 (21:50 -0800)]
Merge remote-tracking branch 'origin/master' into micropeak-logging
Bdale Garbee [Sat, 29 Dec 2012 05:30:26 +0000 (22:30 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Keith Packard [Sat, 29 Dec 2012 02:35:46 +0000 (19:35 -0700)]
altos: Fix MegaDongle CC1120 chip select pin
It's on A0, not C5
Signed-off-by: Keith Packard <keithp@gag.com>
Keith Packard [Sat, 29 Dec 2012 02:34:33 +0000 (19:34 -0700)]
altos: Fix cc1120 debug code to build on megadongle
RDF function had changed, and APRS isn't available on megadongle.
Signed-off-by: Keith Packard <keithp@gag.com>
Keith Packard [Sat, 29 Dec 2012 00:34:48 +0000 (16:34 -0800)]
Lots more work on the MicroPeak application
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 28 Dec 2012 22:36:24 +0000 (15:36 -0700)]
update stlink-pins document to make it clear 4-pin MicroMaTch is our
standard STM32L programming connector, and the big MM thing was v0.1 only
Keith Packard [Tue, 25 Dec 2012 22:45:49 +0000 (14:45 -0800)]
Add file chooser for MicroPeak
Needs reasonable directory tracking
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 25 Dec 2012 22:23:29 +0000 (14:23 -0800)]
Start building MicroPeak GUI tool
Download, save and analyze MicroPeak flight data
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 25 Dec 2012 22:20:42 +0000 (14:20 -0800)]
Merge branch 'master' into micropeak-logging
Keith Packard [Tue, 25 Dec 2012 22:19:19 +0000 (14:19 -0800)]
Move libaltos to top level
This will let it be shared by the new MicroPeak gui
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 Dec 2012 07:15:20 +0000 (23:15 -0800)]
altos: Actually record ground averages for 6dof sensor
This gets the long-term averages for the 6dof sensors recorded into
the first flight log record.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 19 Dec 2012 06:59:36 +0000 (22:59 -0800)]
altosui: Clean up graph a bit, remove shapes, improve tooltips
Sometimes graphs would get shapes at each datapoint which was
annoyingly cluttered. And, the tooltips used a format that was
difficult to interpret.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Dec 2012 08:39:37 +0000 (00:39 -0800)]
altos: Add distinct LED pattern before writing log data
Otherwise, the whole log looks like a an extra altitude digit.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Dec 2012 06:58:49 +0000 (22:58 -0800)]
altos: Make micropeak 'serial' interface work
I prototyped the mpserial interface on a breadboard and tuned the
circuit to register the LED correctly. Then adjusted the serial code
to send bits at the right speed and format.
The logging contents are now in hexdecimal with a CCITT CRC-16
computed to verify correct reception.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 18 Dec 2012 01:03:41 +0000 (17:03 -0800)]
altos: Average MPU6000 values on ground for later use
Having long-term ground averages recorded to the eeprom file will make
post-flight analysis of the data better.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Dec 2012 00:52:15 +0000 (16:52 -0800)]
altos: Re-enable beeper on megametrum
I turned it off during radio testing and forgot to fix that before committing...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Dec 2012 00:08:33 +0000 (16:08 -0800)]
altos: Add new MARC status pin interrupt bits to megadongle
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Dec 2012 00:06:41 +0000 (16:06 -0800)]
Merge branch 'aprs' into 'master'
Keith Packard [Mon, 17 Dec 2012 00:04:05 +0000 (16:04 -0800)]
altos: Wire up another CC1120 GPIO to get MARC status changes
When the radio drops out of RX or TX mode due to an error, it changes
the MARC status, and sends pulse down a configured GPIO. Use this to
tell when something 'bad' happened during TX or RX so that we can
recover from losing the SPI bus in the middle of transmission or
reception.
Without this, the radio would change state and we'd never know,
leaving the radio code waiting for an interrupt that would never arrive.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Dec 2012 21:31:45 +0000 (13:31 -0800)]
altos: Test APRS rounding by using coordinates near the boundary
This selects lat/lon and altitude near the rounding boundary to check
that the resulting APRS data is correctly computed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Dec 2012 21:30:20 +0000 (13:30 -0800)]
altos: Document what HAS_BOOT_RADIO does in the m25 driver
HAS_BOOT_RADIO causes the m25 driver to abort any ongoing receive in
case that is holding the SPI bus.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Dec 2012 21:29:31 +0000 (13:29 -0800)]
altos: Round APRS data correctly
Apply rounding once at the start of the computation, then truncate
after that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 16 Dec 2012 21:25:54 +0000 (13:25 -0800)]
altoslib: unconfigured radio frequency data is now -1, not 0
This changed when AltosConfigData was cleaned up, so now frequency
settings must check for positive numbers rather than non-zero.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 15 Dec 2012 23:07:07 +0000 (15:07 -0800)]
doc: Add warning about matching battery voltage.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 15 Dec 2012 22:47:22 +0000 (14:47 -0800)]
doc: Add paragraph noting differences in JST polarity
Looks like the 'standard' polarity for 3.7V lipos using JST connectors
in RC aircraft is swapped from what Spark Fun uses. Note that in the
docs to try and keep people from wrecking hardware.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 15 Dec 2012 03:29:50 +0000 (19:29 -0800)]
Merge branch 'micropeak-1.1'
Keith Packard [Sat, 15 Dec 2012 03:28:49 +0000 (19:28 -0800)]
altoslib: Discard previous flight state on SN change
A previous change discarded previous *telemetry* state, but failed to
discard any previous overall flight state. This would reset some of
the data fields, but wouldn't reset the GPS state and max measurements.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 15 Dec 2012 03:27:56 +0000 (19:27 -0800)]
altoslib: Only list flight logs for boards that we know have them
Boards that don't have flight logs will generate a nice 'Syntax Error'
and fail to initialize.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 14 Dec 2012 19:11:39 +0000 (11:11 -0800)]
altos: Log baro readings for MicroPeak
This logs barometric data every 192ms (more or less) to the 504
remaining bytes of internal EEPROM storage in the ATtiny85. This
provides 48.192 seconds of logging.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 13 Dec 2012 06:53:36 +0000 (22:53 -0800)]
altos: Note that Lithium battery may be included with MicroPeak
I'm not willing to say that we'll always be able to include a battery,
but we can certainly try, and they're certainly cheap enough that we
should.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 13 Dec 2012 06:36:59 +0000 (22:36 -0800)]
Merge branch 'micropeak-1.1'
Keith Packard [Thu, 13 Dec 2012 06:35:05 +0000 (22:35 -0800)]
doc: Update MicroPeak doc to include EEPROM and programming info
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Dec 2012 19:10:14 +0000 (11:10 -0800)]
Merge branch 'micropeak-1.1'
Keith Packard [Wed, 12 Dec 2012 19:01:48 +0000 (11:01 -0800)]
altos: Log in-flight data for MicroPeak
This logs the low 16 bits of the pressure value to the remaining
on-chip eeprom. It can be read out with a standard AVR programming
dongle.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Dec 2012 18:57:03 +0000 (10:57 -0800)]
altos: Add load-slow target for MicroPeak
This sets the programming clock to 1/4 of the 250kHz clock used by the
MicroPeak firmware, allowing the device to be reprogrammed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 12 Dec 2012 07:43:30 +0000 (23:43 -0800)]
altos: Tim Van Milligan suggestion for µP -- delay before showing last flight
This gives the user time to move their finger out of the way of the LED.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 11 Dec 2012 22:42:43 +0000 (14:42 -0800)]
Merge branch 'micropeak-1.1'
Keith Packard [Tue, 11 Dec 2012 22:41:53 +0000 (14:41 -0800)]
altos: Increase MicroPeak blink times a bit
make the 0 longer (1 sec now), and make the time between digits longer
(also 1 sec now)
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 10 Dec 2012 02:33:31 +0000 (18:33 -0800)]
Merge branch 'micropeak-1.1'
Keith Packard [Mon, 10 Dec 2012 02:28:33 +0000 (18:28 -0800)]
altos: Use alt_t value to hold displayed height in micropeak
Heights are 32 bits (to get .1 meter resolution) in micropeak; make
sure we have enough bits while blinking out the computed value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 10 Dec 2012 02:27:49 +0000 (18:27 -0800)]
altos: Make sure pa to altitude conversion is done with 32 bits
We need 32 bits to hold intermediate values, even if the final
altitude is reported in only 16 bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 9 Dec 2012 22:32:35 +0000 (14:32 -0800)]
altos: Store altitude in 32-bits for MicroPeak
Needs all 32 bits to store .1 meter resolution
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 06:49:34 +0000 (22:49 -0800)]
altos: Stop including profiling and stack guard code in megametrum
These take CPU time and memory and are intended only for debugging
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 01:38:17 +0000 (17:38 -0800)]
altos: Fix aprs test to not allow callsign configuration
There's no configuration to take a callsign from...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 01:35:15 +0000 (17:35 -0800)]
altosui: Add APRS interval configuration to UI
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 01:34:10 +0000 (17:34 -0800)]
Merge branch 'master' into aprs
Keith Packard [Sat, 8 Dec 2012 01:27:48 +0000 (17:27 -0800)]
altosui: Call config UI from AltosConfigData directly
Don't make AltosConfig have a pile of config code, stick that in
AltosConfigData instead. This uses a new interface, AltosConfigValues
to get from AltosConfigData to the UI.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 01:20:02 +0000 (17:20 -0800)]
altos: Use configured callsign in APRS packets
Instead of hard-coding my own call sign...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 8 Dec 2012 01:18:32 +0000 (17:18 -0800)]
altos: Make APRS interval configurable
This provides a separate configuration value for APRS, allowing the
interval between APRS reports to vary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 18:15:25 +0000 (10:15 -0800)]
altos: Fix up APRS packet sending code in cc1120 driver
This fixes the FIFO management, ensuring that the data are streamed
into the radio fast enough to keep the packet continuous. Sounds like
it works, but testing with an actual APRS receiver is required.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 18:14:11 +0000 (10:14 -0800)]
Merge branch 'master' into aprs
Keith Packard [Fri, 7 Dec 2012 18:05:51 +0000 (10:05 -0800)]
altos: fix functions calling pollchar to use 'int' to hold the value
AO_READ_AGAIN doesn't fit in a char anymore now that stdio is 8-bit
clean, everyone using pollchar must use an 'int' variable to capture
the whole value from pollchar.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 16:32:22 +0000 (08:32 -0800)]
altosui: Use AltosConfigData for altosui configuration dialog
Instead of a separate config language parser, share with altoslib
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 01:08:39 +0000 (17:08 -0800)]
altoslib: Make AltosConfigData parse all of the config data
It was missing quite a few. This also speeds up parsing of config from
TeleScience, TeleBT and TeleTerra by not listing flight info on those
products (where it doesn't make sense).
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 01:07:25 +0000 (17:07 -0800)]
altoslib: Make AltosMs5607 capable of parsing ms5607 info lines
This moves the parsing from AltosMs5607Query
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 01:06:17 +0000 (17:06 -0800)]
altos: Change 'flight-number' to 'current-flight'
Avoids ambiguity with stored flight info, which starts lines with 'flight'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 7 Dec 2012 00:29:36 +0000 (16:29 -0800)]
altos: Shrink 'ao_version' by calling printf fewer times
Each printf call costs quite a bit of code space on the cc1111, so
instead of making multiple short calls, make one longer one.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 18:30:46 +0000 (10:30 -0800)]
altos: Send APRS packets even during ascent
If you're using APRS, presumably you want to watch the rocket going up too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 18:28:14 +0000 (10:28 -0800)]
altos: Allow telemetry, rdf and APRS to be individually controlled
But, only when APRS is available so that TeleMetrum and TeleMini don't
change behaviour
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 18:23:39 +0000 (10:23 -0800)]
altos: Hook up APRS to telemetry loop
Send APRS packet once every 2 seconds
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 18:12:11 +0000 (10:12 -0800)]
altos: Hook APRS up to the radio
This adds an arbitrary-length packet writing function to the radio
code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 07:39:47 +0000 (23:39 -0800)]
altos: Prepare APRS for use within altos itself
Make all variables static, const-ify constants, change the public
name of the single entry point.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 06:23:46 +0000 (22:23 -0800)]
altos: Start restructuring APRS code to create and send packets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 05:37:47 +0000 (21:37 -0800)]
altos: Remove a bunch of time bits from the APRS code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 05:34:05 +0000 (21:34 -0800)]
altos: Remove APRS sine-wave table
We're generating a lovely square wave, which appears to be decoded
just fine thankyouverymuch.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 05:25:29 +0000 (21:25 -0800)]
altos: More APRS trimming
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 6 Dec 2012 05:22:55 +0000 (21:22 -0800)]
altos: Remove more unused APRS code
Getting down to a reasonable amount of code.
Signed-off-by: Keith Packard <keithp@keithp.com>