]>
git.gag.com Git - hw/altusmetrum/log
Bdale Garbee [Thu, 2 Feb 2017 07:41:14 +0000 (00:41 -0700)]
fix wrong pin number on symbol
Bdale Garbee [Thu, 2 Feb 2017 06:54:11 +0000 (23:54 -0700)]
16-output LED/PWM controller for use with RC servos on pnpservo board
Bdale Garbee [Thu, 2 Feb 2017 06:53:32 +0000 (23:53 -0700)]
update metadata for TM v2.0b-2017 build
Bdale Garbee [Tue, 24 Jan 2017 19:47:28 +0000 (12:47 -0700)]
TI design note regarding use of Johanson balun/filter modules
Bdale Garbee [Tue, 24 Jan 2017 19:44:51 +0000 (12:44 -0700)]
add schematic symbol for Johanson balun/filter module
Bdale Garbee [Tue, 24 Jan 2017 19:38:10 +0000 (12:38 -0700)]
add JTI 433Mhz balun/filter module to preferred parts list
Bdale Garbee [Tue, 24 Jan 2017 19:37:53 +0000 (12:37 -0700)]
remove spurious '4' from SMT part footprint names
Bdale Garbee [Tue, 24 Jan 2017 19:23:38 +0000 (12:23 -0700)]
add footprint for Johanson balun/filter module, 50mil6pin
Bdale Garbee [Tue, 24 Jan 2017 17:10:32 +0000 (10:10 -0700)]
footprint for Johanson balun/filter combined modules used with cc1111, et al
Bdale Garbee [Tue, 24 Jan 2017 16:57:35 +0000 (09:57 -0700)]
integrated balun/filter for 915 Mhz cc1111 min-area designs
Bdale Garbee [Tue, 24 Jan 2017 16:55:46 +0000 (09:55 -0700)]
integrated balun/filter for small area designs with cc1111, et al
Bdale Garbee [Sat, 7 Jan 2017 19:20:42 +0000 (12:20 -0700)]
reel width of ublox MAX parts is known, too
Bdale Garbee [Sat, 7 Jan 2017 19:16:30 +0000 (12:16 -0700)]
add PnP format column to preferred parts database, populate with what I know right now
Bdale Garbee [Thu, 5 Jan 2017 18:16:48 +0000 (11:16 -0700)]
data sheet for our "new" micro USB connector from 4ucon
Bdale Garbee [Thu, 22 Dec 2016 16:26:25 +0000 (09:26 -0700)]
50mil spacing 3-pin header for random jumpering use
Bdale Garbee [Wed, 21 Dec 2016 07:48:57 +0000 (00:48 -0700)]
make drc target use all defined schematic sheets
Bdale Garbee [Thu, 15 Dec 2016 21:02:07 +0000 (14:02 -0700)]
update symbol to put Vdda pin on the end for easier filter layout
Bdale Garbee [Thu, 15 Dec 2016 20:36:06 +0000 (13:36 -0700)]
new symbol for 48-lead STM32F042 variant
Bdale Garbee [Thu, 1 Dec 2016 08:18:47 +0000 (01:18 -0700)]
first cut at footprint for the BTle module
Bdale Garbee [Thu, 1 Dec 2016 07:30:49 +0000 (00:30 -0700)]
symbol for Microchip Bluetooth LE module BM70BLES1FC2
Bdale Garbee [Sun, 20 Nov 2016 22:39:44 +0000 (15:39 -0700)]
add ST3232C symbol
Bdale Garbee [Sun, 20 Nov 2016 21:42:47 +0000 (14:42 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Sun, 20 Nov 2016 21:42:24 +0000 (14:42 -0700)]
capture all the things I hadn't put in git yet... sigh
Bdale Garbee [Sun, 20 Nov 2016 19:16:14 +0000 (12:16 -0700)]
add footprint for PS/2 keyboard connector
Bdale Garbee [Sun, 20 Nov 2016 18:05:53 +0000 (11:05 -0700)]
add footprints for VGA connector, etc
Bdale Garbee [Sun, 20 Nov 2016 17:22:43 +0000 (10:22 -0700)]
data sheet for VGA connector series I like
Bdale Garbee [Sun, 20 Nov 2016 17:16:41 +0000 (10:16 -0700)]
add male Norcomp D-shell connectors needed for elf
Bdale Garbee [Sun, 20 Nov 2016 17:07:15 +0000 (10:07 -0700)]
Norcomp data sheets for D-shell connectors used on cncfpga, elf, etc
Bdale Garbee [Fri, 18 Nov 2016 02:50:06 +0000 (19:50 -0700)]
add a pin 9 to ground mounting screws
Bdale Garbee [Fri, 18 Nov 2016 02:26:53 +0000 (19:26 -0700)]
complete this footprint, including putting the pins in the right places... I think!
Bdale Garbee [Fri, 4 Nov 2016 15:34:36 +0000 (09:34 -0600)]
move power pins on MPU9250 symbol to simplify schematics
Bdale Garbee [Fri, 4 Nov 2016 15:27:49 +0000 (09:27 -0600)]
move MPU9250 pin 20 on symbol to simplify schematics
Bdale Garbee [Fri, 4 Nov 2016 15:22:16 +0000 (09:22 -0600)]
new symbol and footprint for MPU-9250 from Invensense
Keith Packard [Mon, 17 Oct 2016 20:21:34 +0000 (13:21 -0700)]
Source STM32L151CBU6 from avnet
Newark is out of stock until feb
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 19 Oct 2016 00:13:45 +0000 (18:13 -0600)]
I just bought all the MMA6555 available, so mark those as 'provided'
Bdale Garbee [Tue, 18 Oct 2016 23:55:42 +0000 (17:55 -0600)]
fix leading space on saw part number
Bdale Garbee [Tue, 18 Oct 2016 23:52:18 +0000 (17:52 -0600)]
updates based on availability in prep for Tmega run at AC
Bdale Garbee [Mon, 17 Oct 2016 23:33:32 +0000 (17:33 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Mon, 17 Oct 2016 20:15:34 +0000 (13:15 -0700)]
Replace SAW with epcos version. Get mag sensor from newark.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 17 Oct 2016 20:00:33 +0000 (13:00 -0700)]
partslist-vendor: Deal with missing elements in CSV file
An empty string is valid; don't crash.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 4 Aug 2016 16:55:58 +0000 (10:55 -0600)]
update copyright year
Keith Packard [Sat, 16 Jul 2016 09:17:56 +0000 (02:17 -0700)]
Add ABM12 (1.60 mm x 1.20 mm) crystals in 40 and 32MHz
These are a bunch smaller than our normal crystals, allowing for
smaller boards.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:59:24 +0000 (12:59 -0700)]
Remove silk outline from 0.25" lug footprint
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:58:46 +0000 (12:58 -0700)]
Add 10-position rotary switch to preferred parts
Used by telefire as box id selector
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:58:13 +0000 (12:58 -0700)]
Remove spurious spaces from preferred-parts
Yes, this file cares about space vs tab, so be careful when editing it.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:57:19 +0000 (12:57 -0700)]
Add goldphoenix target
This constructs all of the files necessary to run a product through
the gold phoenix turn-key system.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:56:26 +0000 (12:56 -0700)]
Fix DK part number for short beeper
Don't use the tall beeper part number...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:54:58 +0000 (12:54 -0700)]
Add goldphoenix as a possible partslist target
gold phoenix wants partslists in a specific format that include vendor
and manufacturer information.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:53:50 +0000 (12:53 -0700)]
nickle's parse_csv doesn't strip quotes, so we have to
This appears to just be a bug in the nickle code which has been fixed
upstream. This local fix only strips quotes if present, so it will
work with either nickle version unless we have names starting with "
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:51:58 +0000 (12:51 -0700)]
Add 'mfg' field to partslist csv output
We'll have to update preferred parts to match at some point, but this
at least makes it possible to generate a BOM including manufacturer names.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:51:30 +0000 (12:51 -0700)]
Add 'device' attribute to cc1200 symbol
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 15 Jul 2016 19:50:55 +0000 (12:50 -0700)]
Move cc1200 docs to subdirectory
Start cleaning up the huge ti directory
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 10 Jul 2016 19:10:16 +0000 (21:10 +0200)]
more holes for a serial port on telegps
Bdale Garbee [Fri, 1 Jul 2016 17:28:43 +0000 (19:28 +0200)]
datasheet for Microchip BTLE module
Bdale Garbee [Fri, 1 Jul 2016 15:37:14 +0000 (17:37 +0200)]
update copyright year to 2016
Keith Packard [Thu, 19 May 2016 04:57:15 +0000 (21:57 -0700)]
Add ability to include more stuff with seeed .zip file
Useful for attaching test instructions or whatever
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 3 May 2016 00:12:15 +0000 (17:12 -0700)]
Add 3568 fuse holder and 8-pin big terminal for updated TeleFire
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Tue, 3 May 2016 00:12:04 +0000 (18:12 -0600)]
add the MPU-9250 register map document, too
Bdale Garbee [Tue, 3 May 2016 00:04:38 +0000 (18:04 -0600)]
add datasheet for MPU-9250 in anticipation of switching *Mega on next rev
Bdale Garbee [Thu, 21 Apr 2016 05:23:07 +0000 (23:23 -0600)]
34 pin header footprint
Bdale Garbee [Thu, 21 Apr 2016 04:21:01 +0000 (22:21 -0600)]
34 pin header for the plug in play autofeeder motor driver board
Bdale Garbee [Thu, 21 Apr 2016 03:54:08 +0000 (21:54 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Tue, 5 Apr 2016 20:35:07 +0000 (13:35 -0700)]
Add TeleMini v2.0 parts
TDK PS12 beeper with smaller holes.
22uF 0805 cap
MX25L4006E flash part
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 5 Apr 2016 20:33:50 +0000 (13:33 -0700)]
Remove vendor and part numbers from mx25l symbol.
These collide with our preferred parts scheme
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 3 Apr 2016 18:05:01 +0000 (11:05 -0700)]
Add L78L33 for mppogo and mkds5n-5 for telefiretwo
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 15:24:15 +0000 (08:24 -0700)]
Make all pads in ufqfpn28 corners at least 6mils wide
This avoids complaints from DRC checking
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 15:23:15 +0000 (08:23 -0700)]
Add clearance around servo locating holes
Without clearance, oshpark plates the holes through.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:53:31 +0000 (19:53 -0700)]
Add 2-screw terminal to preferred parts
telemini v2.0 design is using this
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:52:39 +0000 (19:52 -0700)]
Fix weird corners on ufqfpn28
These have a hack to make the corners step to approximate a diagonal
line, but they were being drawn wrong, leaving too little space
between the corner and adjacent pads.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:51:56 +0000 (19:51 -0700)]
mlp8 4x3 footprint had pads in the wrong places
They were spaced too far from the center of the package and barely
touched the pads.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:50:45 +0000 (19:50 -0700)]
Allow footprint.5c checks to be overridden
Some packages do 'odd' things and need to turn off the normal rule
checking
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 28 Mar 2016 02:50:02 +0000 (19:50 -0700)]
Add version of TDK PS12 beeper with pins at process mins
This reduces the board area consumed by the pin metal and clearances
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 17 Mar 2016 02:34:11 +0000 (19:34 -0700)]
Fix process-specific values in nickle-generated footprints
This centralizes the definition of the process values in the
footprint.5c file, instead of scattering the values across each
footprint program. This fixes several footprints with insufficient
clearance or mask width while shrinking excessive values in other
footprints.
This also adds some convenience functions to footprint.5c for
generating ground pads, both large square ones with vias embedded and
smaller ones that just want less paste on the pad than a normal pad of
similar size.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 16 Mar 2016 17:22:20 +0000 (10:22 -0700)]
Flip the servo footprint
I drew this from the bottom, so it was mirrored.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 16 Mar 2016 17:21:03 +0000 (10:21 -0700)]
Add AC specific build target
This uses the right filename extensions to automatically configure
freedfm's import system.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 16 Mar 2016 17:19:34 +0000 (10:19 -0700)]
PMBT3804VS,115 needs the ',115' portion
There appear to be multiple PMBT3804VS parts
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 16 Mar 2016 17:18:10 +0000 (10:18 -0700)]
Allow for embedded commas (and quotes) in part numbers
The PMBT3904VS,115 needs the trailing comma portion to describe a
unique part. This change quotes strings containing commas or quotes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 16 Mar 2016 17:16:55 +0000 (10:16 -0700)]
Add ST App Note AN2606 - STM32 microcontroller system memory boot mode
This describes the built-in boot loader for various STML and STMF
series parts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Thu, 10 Mar 2016 23:05:25 +0000 (16:05 -0700)]
datasheet for Panasonic AV4404 switches for PnP feeders
Keith Packard [Wed, 2 Mar 2016 18:00:16 +0000 (10:00 -0800)]
Add nickle code to draw the altusmetrum logo for pcb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 Mar 2016 23:16:04 +0000 (17:16 -0600)]
Add M25P16-VMC6TG to preferred parts
This is a tiny (4x3mm) 16Mb (2MB) flash part.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 Mar 2016 23:15:42 +0000 (17:15 -0600)]
Remove copyright and license from title-D-keithp.com
This lets the copyright date get set in the project
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 Mar 2016 23:15:05 +0000 (17:15 -0600)]
Fix pwson-n6 package pin clearance
Need to multiply pin clearance by two as it's a diameter value.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 1 Mar 2016 23:13:58 +0000 (17:13 -0600)]
Add tiny servo.
This splits the servo itself from the motor contacts so they can be
placed independently.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 21 Feb 2016 22:17:05 +0000 (14:17 -0800)]
Add 35V 1uF 0402 cap for chaoskey
The existing part was only 6.3V. I loaded some 25V parts I had in
stock for the earlier prototypes, but we might as well use a 35V part
and have a bit of headroom while we're switching the design around.x
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 17 Feb 2016 15:36:29 +0000 (07:36 -0800)]
Add TPS71433 symbol
Bdale Garbee [Wed, 17 Feb 2016 14:59:45 +0000 (07:59 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Keith Packard [Wed, 17 Feb 2016 04:49:23 +0000 (20:49 -0800)]
Add description of centroid file conventions from screaming circuits
Bdale Garbee [Wed, 10 Feb 2016 03:28:02 +0000 (14:28 +1100)]
fix 0.25 tab footprint to include annular ring, copper both sides
Keith Packard [Fri, 29 Jan 2016 16:13:32 +0000 (08:13 -0800)]
Power pins on STM32F042G6 moved
The original document didn't have vddio2, but the current revision
(and the silicon I've received) places it on pin 18.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Jan 2016 16:13:00 +0000 (08:13 -0800)]
Add preferred parts for µPusb
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Jan 2016 16:12:00 +0000 (08:12 -0800)]
Merge plated and unplated holes for seeed and oshpark zips
This uses gerbv to merge the two sets of holes into a single file
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Jan 2016 16:10:26 +0000 (08:10 -0800)]
Reduce number of polys in ufqfpn28 corner pads
These pads are supposed to have a diagonal edge, which pcb doesn't
support. Instead, a sequence of overlapping rectangles is used to
approximate the diagonal portion. The original version used 50 on each
pad, which made the stencil cutter very unhappy. This version uses
only 4.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 29 Jan 2016 16:04:11 +0000 (08:04 -0800)]
Update stm32f042 reference to rev 8
Keith Packard [Fri, 29 Jan 2016 06:27:02 +0000 (22:27 -0800)]
Update stm32f042 datasheet to rev4
Keith Packard [Tue, 19 Jan 2016 17:36:32 +0000 (09:36 -0800)]
Add TSV521 datasheet
Used in µPUSB
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 19 Jan 2016 04:10:22 +0000 (20:10 -0800)]
Sort LEDs in spectral order
At least it's an order?
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 29 Jan 2016 03:21:00 +0000 (20:21 -0700)]
Merge branch 'master' of ssh://git.gag.com/scm/git/hw/altusmetrum
Bdale Garbee [Fri, 29 Jan 2016 03:19:55 +0000 (20:19 -0700)]
updated audio amp datasheet, add datasheet attributes to symbols
Bdale Garbee [Fri, 29 Jan 2016 03:13:01 +0000 (20:13 -0700)]
latest version of USB audio chip data, rename to match part used