]>
git.gag.com Git - fw/altos/log
Bdale Garbee [Tue, 5 Jul 2016 08:21:29 +0000 (10:21 +0200)]
remove debian/ from master branch, it should live only on the debian branch
Bdale Garbee [Mon, 4 Jul 2016 22:48:07 +0000 (00:48 +0200)]
updates made during 1.6.5 release process
Keith Packard [Sun, 3 Jul 2016 10:00:10 +0000 (12:00 +0200)]
doc: Build 1.6.5 release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jul 2016 20:52:38 +0000 (22:52 +0200)]
Credit Chuck Haskin for helping fix the SPI bug.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 2 Jul 2016 20:08:58 +0000 (22:08 +0200)]
Bump to 1.6.5. Add preliminary release notes
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 1 Jul 2016 03:43:03 +0000 (20:43 -0700)]
altos/cc1111: Remove 'show tasks' command
This saves space on cc1111 parts.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 21:22:32 +0000 (14:22 -0700)]
Bump to testing version 1.6.4.2
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 30 Jun 2016 01:41:24 +0000 (18:41 -0700)]
altos: Use FIFO_THR pin for cc1120 transmit buffering
Instead of reading NUM_TXBYTES, set the FIFO_THR pin to indicate when
64 bytes are available in the buffer.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 30 Jun 2016 01:33:56 +0000 (18:33 -0700)]
altos: Leave USB enabled in flight with -DDEBUG=1
This leaves the command line available for diagnostics when debugging.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 19:55:30 +0000 (12:55 -0700)]
altos/stm: clean up ao_exti_enable
Was computing (1 << pin) twice for no good reason.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 19:54:31 +0000 (12:54 -0700)]
altos: Make task list output more useful
Add the timeout value and task id
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 23:07:22 +0000 (16:07 -0700)]
altos/telemini-v2.0: Remove show tasks command
There's not enough memory for this command, and it isn't necessary.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 19:52:37 +0000 (12:52 -0700)]
altos: Make ao_delay(0) not wait forever
ao_delay() is implemented on top of ao_sleep_for, and ao_sleep_for
uses the timeout value of 0 to indicate an infinite timeout. Calls to
ao_delay for 0 ticks would unintentionally hit this case and end up
waiting forever.x
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 19:49:16 +0000 (12:49 -0700)]
altos: cc1200: use FIFO threshold pin output for APRS buffering
Instead of polling the device for fifo space, just use the available
pin configuration to figure out if there is enough space for a single
APRS buffer. Then set the APRS buffer size to match the fifo threshold
setting in the chip so that we know we can write the whole APRS buffer
once the pin says there's space.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:03:34 +0000 (17:03 -0700)]
altos: Add debug check for irq block when editing task queues
List manipulation operations are not atomic, so interrupts need to be
blocked while changing them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 01:40:46 +0000 (18:40 -0700)]
altos/drivers: Use more reliable byte interface for CC1120 reception
This replaces direct register access with function calls to allow that
code to respect the hardware requirements.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 01:39:31 +0000 (18:39 -0700)]
altos/stm: Add better byte-level SPI api
This provides inline functions for sending and receiving individual
bytes, and setup/finish functions to wrap them in. This make the byte
sending respect the SPI hardware interface requirements.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 01:37:49 +0000 (18:37 -0700)]
altos/stm: Clean up spi_enable/disable_index functions
These had an extra level of switch nesting for no good reason.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Jun 2016 06:25:01 +0000 (23:25 -0700)]
altos/stm: move spi execution to common ao_spi_run
This regularizes SPI hardware use and ensures that the device is
turned off after it has been used and that the status register is back
to 'normal' the next time through.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Jun 2016 06:26:20 +0000 (23:26 -0700)]
altos: Add STM SPI debugging
This dumps out the SPI hardware state and history of SPI operations
when compiled with -DDEBUG=1. Without that, this patch does nothing.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Jun 2016 00:26:19 +0000 (17:26 -0700)]
altos: Add STM DMA debugging
This provides a command that shows current DMA operations when
compiled with -DDEBUG=1. Without that, this patch has no effect.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 01:25:44 +0000 (18:25 -0700)]
altos/stm: Change ao_spi_send_sync definition to take const source
Provides for a bit better error checking.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:15:27 +0000 (17:15 -0700)]
altos/stm: Add more SPI status register bits
These weren't the original version of the docs that we had.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:12:48 +0000 (17:12 -0700)]
altos/stm: use 0xff for dma mutex value for allocated mutexes
DMA channels which are 'allocated' can't be shared. Instead of using
the value '1' in the related 'mutex', use 0xff which won't match any task.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:11:38 +0000 (17:11 -0700)]
altos/stm: remove ao_dma_abort
This function isn't used anywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:09:00 +0000 (17:09 -0700)]
altos: Move comment in ao_sleep_for next to related code
The comment got moved to the wrong place
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 29 Jun 2016 00:04:59 +0000 (17:04 -0700)]
altos: Block interrupts while waking tasks sleeping on timers.
Interrupts may not be blocked in the timer ISR, but they need to be
while walking the pending timer list and moving tasks back to the run
queue.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Jun 2016 07:07:23 +0000 (00:07 -0700)]
altosui: Deliver firmware for Tmega 2.0 and TBT 3.0 for Windows too
1.6.4 added Tmega 2.0 and TBT 3.0 firmware to linux and mac, but
neglected windows.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 28 Jun 2016 06:28:28 +0000 (23:28 -0700)]
Mark testing version 1.6.4.1
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 24 Jun 2016 19:07:36 +0000 (12:07 -0700)]
altosdroid: Deal with multiple installed android SDKs
Use the latest SDK's zipalign
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 24 Jun 2016 19:06:32 +0000 (12:06 -0700)]
ao-tools/ao-chaosread: Document length (-l) option
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 20 Jun 2016 17:19:32 +0000 (10:19 -0700)]
Bump android version to 13
Need to update the maps API key in the package
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Wed, 22 Jun 2016 21:01:09 +0000 (15:01 -0600)]
switch libgtk-3-bin build-dep to gtk-update-icon-cache, closes: #825455
Keith Packard [Fri, 17 Jun 2016 17:18:20 +0000 (10:18 -0700)]
doc: Add install-html script
This script strips the XML-ish bits from html files so that ikiwiki
can parse them correctly
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:58:06 +0000 (08:58 -0700)]
Bump version to 1.6.4
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:54:19 +0000 (08:54 -0700)]
altoslib: Stop reflective JSON class walk at Object instead of null
Android has classes above Object which are all tied together which
cause the object walking to fail in pretty spectacular ways. As Object
has no interesting fields, that serves as a fine barrier to the super
class walk and works on both android and real java.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:27:12 +0000 (08:27 -0700)]
altosui: Print filename before attempting to parse in --summary mode
Any problems handling the file are easier to debug if the filename is
visible above the error message.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:26:31 +0000 (08:26 -0700)]
altoslib: Add back some JSON exception debugging printfs
These make it possible to figure out where the JSON code went wrong.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:17:57 +0000 (08:17 -0700)]
altoslib: Add construction for remaining primitive array types to JSON
AltosCompanion has an array of ints, which was missed until I tried a
telemetry file with companion data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 15:17:15 +0000 (08:17 -0700)]
altoslib: Add null constructor for AltosCompanion
This lets it be used by the JSON code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 07:52:38 +0000 (00:52 -0700)]
altoslib: Get rid of manual JSON encoding stuff
Now that the reflective JSON stuff is working, we can delete all of
the manual code.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 07:02:05 +0000 (00:02 -0700)]
altoslib: Improve AltosState save/restore debugging
When save/restore generate different values, write out the two
versions to one.json and two.json for easy comparison.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 07:01:15 +0000 (00:01 -0700)]
altoslib: Use reflection JSON code for frequency preferences
This replaces the non-reflective JSON code with reflective code, which
is much shorter.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 07:00:09 +0000 (00:00 -0700)]
altoslib: Add JSON-based object saving/restoring code
This uses Java reflection to construct JSON strings for
most Java objects.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 17 Jun 2016 06:59:06 +0000 (23:59 -0700)]
altoslib: Add null constructors to AltosQuaternion and AltosRotation
These will be used in the reflection-based JSON code
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:52:08 +0000 (22:52 -0700)]
altoslib: Remove AltosHashSet code
Everything has switched to JSON now.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:40:27 +0000 (22:40 -0700)]
altoslib: Switch preserved state format to JSON
This is much easier to debug than the icky strings with backslashes everywhere.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:39:31 +0000 (22:39 -0700)]
doc: Updates to 1.6.4 release notes.
Note USB fixes for host reboot and other changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:38:32 +0000 (22:38 -0700)]
altosui: Don't open command window when --graph is provided
When the user explicitly asks to open a graph, don't bring up the
command button window too.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:37:39 +0000 (22:37 -0700)]
altosuilib: Track open frames, exit when none remain
This will let us not have the altosui window open by causing the
application to shut down when the last frame closes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:36:35 +0000 (22:36 -0700)]
altosui: Remove missing items from --summary output
Check all values for MISSING before printing them.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 16 Jun 2016 05:33:55 +0000 (22:33 -0700)]
altosdroid: Auto save freq changes on 'ok'
Add any pending changes in the edit entries to the frequency set when
the user selects 'ok'.
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Sun, 12 Jun 2016 15:23:36 +0000 (09:23 -0600)]
extend "ok" temp range to 40C, since battery charger on bench can drive temp above
35C at times in Bdale and Robert's production testing
Keith Packard [Sun, 12 Jun 2016 05:17:01 +0000 (22:17 -0700)]
altos/stmf0: Remove ao_usb_free
This can't work without a lot more effort.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 12 Jun 2016 05:16:12 +0000 (22:16 -0700)]
altos/stmf0: Rework the sram allocation to save a few text bytes
Boot loaders were going over 4096 bytes of ROM. I suspect we'll need
more serious work soon.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 21:40:26 +0000 (14:40 -0700)]
altos/cc1115l: Reduce trace buffer size
A 32-element trace buffer is all the larger we can fit in teledongle.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 21:39:25 +0000 (14:39 -0700)]
altos/stm: Handle USB reset in STM32L usb driver
Just like lpc and stmf0, deal with the host resetting the bus while
rebooting by restoring all usb-related data to the initial values.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 21:33:50 +0000 (14:33 -0700)]
altos/lpc: Handle USB reset by resetting internal state
Just like stmf0, this clears internal state at USB reset time so the
driver can survive host OS reboots.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 05:06:30 +0000 (22:06 -0700)]
stmf0: Do not send more data than requested for GET_DESCRIPTOR
When Linux boots, it asks for only the first 8 bytes of the device
descriptor; we must limit the amount of data sent back to that amount
or USB will get wedged.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 05:05:24 +0000 (22:05 -0700)]
stmf0: Clear all USB state when resetting chip. Wakeup all sleepers
When USB is reset, but the board is not power cycled, all of the
internal USB state needs to be reset, and any tasks blocked on sending
or receiving packets need to be awoken so they can go wait for USB to
start running again.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 10 Jun 2016 05:03:45 +0000 (22:03 -0700)]
telegps-v1.0: Document how SN 1959 was fixed
SN1959 was fixed by jumpering pin 8 to pin 10 so that the DONE_INT_PIN
could be switched from PIO 2 to PIO 4 as pin 8 appeared to have failed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 5 Jun 2016 16:17:12 +0000 (09:17 -0700)]
altosuilib: Only display map debugging when serial_debug is enabled
This keeps the application quiet for most users.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 28 May 2016 03:30:18 +0000 (20:30 -0700)]
altosuilib: Fill preload map on site or lat/lon change
This loads the map view with the selected area when the site entry is
changed or the user hits return in the lat/lon fields. This lets you
see the target launch site without having to load the whole preload set.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 26 May 2016 21:33:44 +0000 (14:33 -0700)]
doc: pad/idle indicator table was busted
I stuck a pile of extra '|' characters in the table by mistake.
Reported-by: Stan <stanleyosmith@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 May 2016 06:44:50 +0000 (23:44 -0700)]
altosuilib: Rename AltosUIMap*New.java to AltosUIMap*.java
This code isn't really new anymore...
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 May 2016 06:40:47 +0000 (23:40 -0700)]
altosuilib: Have map preload respond to units and font size changes
Just add suitable listeners so that the display updates when
preferences change.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 25 May 2016 06:40:03 +0000 (23:40 -0700)]
altoslib: use miles for distances > 1000ft.
This makes both the map line and the other distance displays use miles
for distances greater than 1000 feet.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:59:12 +0000 (13:59 -0700)]
telegps: Add monitor idle mode
This monitors directly connected devices. No support for doing monitor
idle using packet mode, as TeleGPS doesn't support that.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:58:41 +0000 (13:58 -0700)]
telegps: Use log_space when flight_log_max is missing
TeleGPS has this, but not flight_log_max
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:57:28 +0000 (13:57 -0700)]
altoslib: Add AltosIdleReader
This provides an AltosFlightReader interface for monitor idle mode,
making that easier to provide in TeleGPS
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:56:21 +0000 (13:56 -0700)]
altoslib: Add log_space to AltosState
TeleGPS doesn't have flight_log_max value, but does have log_space
which we can use for the same thing in monitor idle mode.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:55:12 +0000 (13:55 -0700)]
altoslib: Set version and log space from AltosIdleFetch
Just more data for monitor idle mode
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sun, 15 May 2016 20:53:38 +0000 (13:53 -0700)]
altoslib: Allow empty values in AltosHashSet representation
Check for value termination before appending the first character.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 May 2016 06:33:53 +0000 (23:33 -0700)]
altoslib: Store saved state in version-independent format
Use AltosHashSet for AltosState so that AltosDroid doesn't lose
tracker information when the application is upgraded.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 May 2016 02:13:05 +0000 (19:13 -0700)]
altoslib: Store common frequencies in library version-independent form
Serializable Objects in java are very specific to the class being
serialized. As we bump the name of the library on a regular basis to
note API/ABI issues, this mean a saved a Serializable object in
the preferences database will fail to load across library version
upgrades.
The saved tracker state and saved common frequencies were the only
objects saved in this form; this patch adds infrastructure for writing
objects in a version-independent form, and then adds support for
saving frequencies in that form.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 May 2016 02:10:19 +0000 (19:10 -0700)]
altosui/telegps/micropeak: Handle both MULTI_LIB and non-MULTI_LIB builds
On x86 systems with -m32 and -m64 compilers, both libaltos32.so and
libaltos64.so are built. Otherwise, we should use libaltos.so
altosui only dealt with libaltos32.so and libaltos64.so, so it only
worked on MULTI_LIB systems. telegps and micropeak only used
libaltos.so, so they wouldn't work correctly on multi-lib systems.
Fix all of them to work either way.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Fri, 13 May 2016 01:05:14 +0000 (18:05 -0700)]
Automatically run 'git submodule update' if necessary
This makes sure pdclib exists by updating for the all and
all-recursive targets
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 May 2016 19:14:03 +0000 (12:14 -0700)]
Bump java library versions
Prepare for 1.6.4 release
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 May 2016 19:13:45 +0000 (12:13 -0700)]
Bump android app version
Prepare for 1.6.4 release
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Thu, 12 May 2016 06:31:53 +0000 (23:31 -0700)]
telegps: Adapt to distance units switching changes
'show_units' is no longer available; use 'parse_units' instead
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 19:48:10 +0000 (12:48 -0700)]
altoslib: Get rid of AltosMap from AltosMapLoader
Cleans up the loader API and eliminates a AltosMapTile for every chunk
of map data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 19:43:51 +0000 (12:43 -0700)]
altosdroid: make disconnect stick past pause/restart
Clear the active_device preference on disconnect so we don't reconnect
anytime the service gets activated.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 17:47:31 +0000 (10:47 -0700)]
altoslib: Clean up map file and url handling
move it all to AltosMapStore.java
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:13:14 +0000 (23:13 -0700)]
doc: Start update for 1.6.4
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:04:23 +0000 (23:04 -0700)]
altosuilib: Don't flicker missing voltages when changing units
For some reason, a value of MISSING -1 was getting used, which caused
displays to light up briefly with a weird value when switching between
metric and imperial units.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:03:45 +0000 (23:03 -0700)]
altosdroid: Rate limit map loading pacifier
Just like in altosui.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 06:02:09 +0000 (23:02 -0700)]
altoslib: Allow map preloading to be aborted
Close the map preload dialog and it would be nice to stop loading map
bits.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:50:23 +0000 (22:50 -0700)]
altosuilib: Rate limit map loading pacifier updates
Just updating the pacifier was consuming a huge amount of CPU. Update
no more than once every 100ms.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:49:04 +0000 (22:49 -0700)]
altoslib: Remove some debug printf calls
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Wed, 11 May 2016 05:46:58 +0000 (22:46 -0700)]
altoslib: Switch distance from m/ft to km/miles for large values
This adds lots of infrastructure to deal with making the unit used
depend on the value itself, and then uses it only for distances.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 19:29:14 +0000 (12:29 -0700)]
Add TeleMega to spec list. Add TeleGPS RF output.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 19:28:51 +0000 (12:28 -0700)]
Publish firmware with keithp-fat
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 00:57:12 +0000 (17:57 -0700)]
altosdroid: Check for closed before writing/reading bluetooth
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 10 May 2016 00:56:28 +0000 (17:56 -0700)]
altosui/telegps: Ship firmware for new hardware
TBT v3.0 and Tmega v2.0
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Mon, 9 May 2016 21:52:38 +0000 (15:52 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos
Bdale Garbee [Mon, 9 May 2016 21:52:21 +0000 (15:52 -0600)]
process updates made during 1.6.3 release cycle
Keith Packard [Mon, 9 May 2016 18:48:42 +0000 (11:48 -0700)]
Bump version to 1.6.3.1
Post 1.6.3 release
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Mon, 9 May 2016 18:33:48 +0000 (11:33 -0700)]
altos/cc1111: Use SW to drive UART RTS pin
Can't get the hw to work.
Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Sat, 7 May 2016 00:10:14 +0000 (17:10 -0700)]
Ignore some built files for 1.6.3
Signed-off-by: Keith Packard <keithp@keithp.com>
Bdale Garbee [Fri, 6 May 2016 23:49:30 +0000 (17:49 -0600)]
Merge branch 'master' of ssh://git.gag.com/scm/git/fw/altos